Why Ignitor For Goodman Furnace Is Necessary?
It is necessary to have a best ignitor for goodman furnace in order to have a good ignition system. A best ignitor will help to prevent any leaking of gas and will also help to increase the efficiency of the furnace.
Our Top Picks For Best Ignitor For Goodman Furnace
Best Ignitor For Goodman Furnace Guidance
Duralight USA Nitride Furnace – Heater Ignitor Direct Replacement For Goodman Amana Janitrol OEM Part 0130F00008S
As winter approaches, many homeowners begin to worry about their furnace. Will it keep their family warm and toasty throughout the long cold months? Is it time to replace the old furnace with a new one?
Those are valid concerns. But there’s another concern that homeowners should have when it comes to their furnace: the ignitor.
The ignitor is what starts the combustion process in your furnace. It’s a small but vital component, and if it fails, your furnace will not work.
There are two main types of ignitors: hot surface ignitors (HSI) and standing pilot ignitors (SI). HSIs are the most common type of ignitor, and they’re what we’ll be focusing on here.
Hot surface ignitors are made from silicon nitride, a material that can withstand high temperatures. That’s important, because the ignitor gets very hot when it’s in use. In fact, it can reach temperatures of up to 1200 degrees Fahrenheit.
Silicon nitride is also a very durable material. It’s not uncommon for HSIs to last for 10 years or more. But eventually, they will wear out and need to be replaced.
If you’re not sure whether your HSI needs
Common Questions on Duralight USA Nitride Furnace – Heater Ignitor Direct Replacement For Goodman Amana Janitrol OEM Part 0130F00008S
• What is the maximum operating temperature of the Duralight USA Nitride Furnace?The maximum operating temperature of the Duralight USA Nitride Furnace is 2,500 degrees Fahrenheit.
• What is the minimum order quantity for the Duralight USA Nitride Furnace?
The minimum order quantity for the Duralight USA Nitride Furnace is one piece.
• What is the warranty period for the Duralight USA Nitride Furnace?
The warranty period for the Duralight USA Nitride Furnace is one year.
• What is the lead time for the Duralight USA Nitride Furnace?
The lead time for the Duralight USA Nitride Furnace is four weeks.
• How is the Duralight USA Nitride Furnace shipped?
The Duralight USA Nitride Furnace is shipped via UPS.
Why We Like This
• 1. Durable Silicon Nitride Construction• 2. Made in USA• 3. OneTrip Parts Two Year Warranty• 4. Correct Mounting Bracket and Direct Replacement Plug• 5. Direct Replacement for Goodman Amana Janitrol OEM Part 0130F00008 and 0130F00008S
Furnace Hot Surface Ignitor / Igniter Fits Goodman 201657-03S
If your Goodman furnace is having trouble igniting, it might be time to replace the hot surface igniter. The Goodman 201657-03S igniter is a direct replacement for the one that came with your furnace, and it’s an easy fix that you can do yourself.
This hot surface igniter is made of a silicon nitride material, which is more durable and has a longer lifespan than the original igniter. It’s also less susceptible to oxidization, so it will last longer and work better in high-humidity environments.
The Goodman 201657-03S igniter comes with instructions and everything you need for an easy installation. And because it’s an OEM (original equipment manufacturer) part, you can be sure it will fit your Goodman furnace perfectly.
If your furnace isn’t igniting properly, don’t wait to get it fixed. Replacing the hot surface igniter is an easy job that you can do yourself, and the Goodman 201657-03S is a direct replacement for the original part. Order yours today and get your furnace back up and running quickly and smoothly.
Common Questions on Furnace Hot Surface Ignitor / Igniter Fits Goodman 201657-03S
• What is a Furnace Hot Surface Ignitor / Igniter Fits Goodman 201657-03S?A Furnace Hot Surface Ignitor / Igniter Fits Goodman 201657-03S is a device that is used to ignite the gas in a furnace.
• What are the dimensions of a Furnace Hot Surface Ignitor / Igniter Fits Goodman 201657-03S?
The dimensions of a Furnace Hot Surface Ignitor / Igniter Fits Goodman 201657-03S are 2.5″ x 1.375″ x 0.75″.
• What is the minimum order quantity for a Furnace Hot Surface Ignitor / Igniter Fits Goodman 201657-03S?
The minimum order quantity for a Furnace Hot Surface Ignitor / Igniter Fits Goodman 201657-03S is 10 pieces.
Why We Like This
1. The furnace hot surface ignitor / igniter fits Goodman 201657 03S.
2. It is a durable and reliable product.
3. It is easy to install and use.
4. It is a cost effective product.
5. It comes with a one year warranty.
Additional Product Information
| Height | 6 Inches |
| Length | 6 Inches |
Goodman 20165703S Hot Surface Ignitor (Norton #601TB-1142) by Goodman
Hot surface ignitors (HSIs) are devices that are used to create a spark that ignites the gas in a furnace. The Goodman 20165703S Hot Surface Ignitor is a Norton #601TB-1142 HSI that is used in Goodman furnaces. This HSI is a silicon carbide ignitor that is used to create a hot surface that can ignite the gas in the furnace. The Goodman 20165703S Hot Surface Ignitor is a replacement for the Goodman #1625703 HSI. This HSI is a reliable ignitor that will provide a long lasting hot surface.
Common Questions on Goodman 20165703S Hot Surface Ignitor (Norton #601TB-1142) by Goodman
• What is the dimensions of the Goodman 20165703S Hot Surface Ignitor (Norton #601TB-1142)?The dimensions of the Goodman 20165703S Hot Surface Ignitor (Norton #601TB-1142) are 1-1/2″ x 3″ x 9-1/2″.
• How does the Goodman 20165703S Hot Surface Ignitor (Norton #601TB-1142) function?
The Goodman 20165703S Hot Surface Ignitor (Norton #601TB-1142) produces intense heat to ignite the gas flowing to the burner in order to heat the air.
• What are the benefits of using the Goodman 20165703S Hot Surface Ignitor (Norton #601TB-1142)?
The benefits of using the Goodman 20165703S Hot Surface Ignitor include improved comfort, safety, and lower energy bills.
• How long does the Goodman 20165703S Hot Surface Ignitor (Norton #601TB-1142) last?
The Goodman 20165703S Hot Surface Ignitor (Norton #601TB-1142) has a
Why We Like This
1. The Goodman 20165703S Hot Surface Ignitor is a reliable and durable product that is designed to last.
2. This product is easy to install and use, making it a great choice for those who are looking for a hassle free experience.
3. The Goodman 20165703S Hot Surface Ignitor is compatible with most Goodman furnaces, making it a versatile option.
4. This product comes with a one year warranty, providing peace of mind and protection in the event of any issues.
5. The Goodman 20165703S Hot Surface Ignitor is an affordable option that is sure to provide value for money.
IG418 SUPCO Furnace Igniter Ignitor for Goodman B1401015, B140108S & Modine 5H075032B (replaces part 41-418, 271NM)
If your Goodman or Modine furnace is having trouble igniting, the problem may be with the igniter. The IG418 SUPCO furnace igniter is a high-quality replacement that can get your furnace up and running again. This igniter is rated for 35-5 amps and 120VAC, making it a compatible replacement for the Goodman B1401015 and Modine 5H075032B. Installation is easy, so you can have your furnace up and running in no time.
Common Questions on IG418 SUPCO Furnace Igniter Ignitor for Goodman B1401015, B140108S & Modine 5H075032B (replaces part 41-418, 271NM)
• What is the part number for the Goodman furnace igniter?The part number for the Goodman furnace igniter is B1401015.
• What is the part number for the Modine furnace igniter?
The part number for the Modine furnace igniter is 5H075032B.
• What is the difference between the Goodman and Modine furnace igniters?
The Goodman furnace igniter is a replacement for the original part, while the Modine furnace igniter is an aftermarket part.
Why We Like This
1) The SUPCO Furnace Igniter is a high quality replacement for the Goodman B1401015, B140108S, and Modine 5H075032B.
2) It is 120VAC and has a 35 5 AMP range.
3) The product is easy to install and is a direct replacement for the original part.
4) It is made of durable materials and is backed by a 1 year warranty.
5) The SUPCO Furnace Igniter is an affordable way to keep your furnace running efficiently.
Additional Product Information
| Height | 3 Inches |
| Length | 6 Inches |
Duralight USA Nitride Furnace – Heater Ignitor Direct Replacement For Goodman Amana Janitrol OEM Part 20165703S
If you’re looking for a durable, reliable and top-quality furnace ignitor, look no further than Duralight USA’s Nitride Furnace Ignitor! This premium quality product offers superior performance and is an exact replacement for Goodman Amana Janitrol’s OEM part (20165703S).
Constructed from durable silicon nitride material, the Duralight USA Nitride Furnace Ignitor is built to last. Additionally, it comes with a two year warranty from the manufacturer. If your current furnace ignitor has latches, please see our ASIN B08GJZV7KB for the correct model. Order yours today and rest assured knowing you’re getting a top-quality product!
Common Questions on Duralight USA Nitride Furnace – Heater Ignitor Direct Replacement For Goodman Amana Janitrol OEM Part 20165703S
• What is the duly finish of a Duralight USA Nitride Furnace?The finish of a Duralight USA Nitride Furnace is black.
• How is the performance of a Duralight USA Nitride Furnace?
The performance of a Duralight USA Nitride Furnace is great.
• What is the average lifespan of a Duralight USA Nitride Furnace?
The average lifespan of a Duralight USA Nitride Furnace is about 20 years.
Why We Like This
• 1. Durable silicon nitride construction.• 2. Made in the USA.• 3. OneTrip Parts two year warranty.• 4. Rectangular plug if your plug has latches please see ASIN B08GJZV7KB.• 5. Direct replacement for Goodman Amana Janitrol OEM part replaces part numbers: 20165703S, 20165703, 201657 03 and model 601.
Benefits of Ignitor For Goodman Furnace
If you are looking for a Goodman furnace, it is important to choose the best ignitor for your unit. There are many benefits to using an ignitor, including improved efficiency and longer lasting operation. An ignitor will help your furnace to light faster and stay lit longer, which can save you money on your energy bill. Additionally, an ignitor can extend the life of your furnace by helping to prevent corrosion and build-up in the unit.
Buying Guide for Best Ignitor For Goodman Furnace
If you are in the market for a new furnace, you may be wondering what the best ignitor for Goodman furnace is. This is a common question among consumers, as there are many different types and brands of furnaces on the market. The answer to this question depends on several factors, such as your budget, the type of furnace you have, and your preferences.
Budget: One important factor to consider when purchasing a new ignitor for Goodman furnace is your budget. There are many different brands and models of furnaces on the market, so it is important to set a budget before shopping. This will help narrow down your options and make it easier to find the right product for you.
Type of Furnace: Another factor to consider when choosing an ignitor for Goodman furnace is the type of furnace you have. There are many different types of furnaces available on the market, so it is important to choose one that will work well with your particular model. Some ignitors are designed specifically for certain types of furnaces, so be sure to check compatibility before making your purchase.
Preferences: Finally, another factor to consider when choosing an ignitor for Goodman furnace is your personal preferences. There are many different features available on various models of furnaces, so it is important to decide which ones are most important to you. Once you have decided what features you need or want in an ignitor, you can then begin narrowing down your options until you find the perfect one for your home heating needs!
Frequently Asked Question
What is the best ignitor for Goodman furnace?
There is no definitive answer for this question as it depends on the specific furnace model and the preferences of the user. Some good ignitors for Goodman furnaces include the Honeywell Q3450 Ignitor Kit and the Robertshaw 41-409 Hot Surface Ignitor.
Where can I purchase a Goodman furnace ignitor?
There are a few places you can purchase a Goodman furnace ignitor. One option is to buy it online through a Goodman dealer. Another option is to find a Goodman furnace parts dealer in your area.
How often should I replace my Goodman furnace ignitor?
It is generally recommended that you replace your furnace ignitor every 3-5 years.
What are the symptoms of a failing Goodman furnace ignitor?
There are several symptoms that can indicate a failing Goodman furnace ignitor: the furnace may produce less heat than usual, the ignitor may glow but the furnace doesn’t start, or the furnace may make strange noises. If you notice any of these symptoms, it’s best to call a qualified technician to diagnose and repair the problem.
How do I troubleshoot a Goodman furnace ignitor problem?
If your Goodman furnace ignitor is not working, there are a few things you can do to troubleshoot the problem. First, check the ignitor for dirt or debris. If the ignitor is clean, then check the ignitor wire for any signs of damage. If the wire is damaged, you will need to replace it. If the ignitor is still not working, then you may need to replace the ignitor itself.
Conclusion
After doing your research and learning about all the features of different furnaces, you’ve decided that the Goodman furnace is the best choice for your home. Not only is it more efficient than other models, but it will save you money on your energy bill each month. With its attractive price point, the Goodman furnace is a wise investment for your home.