When choosing a blade for a Makita track saw, it is important to consider the following factors: blade material, blade size, kerf width, depth of cut, and number of teeth. Blade materials include carbide, high-speed steel (HSS), and diamond. Carbide blades are the most expensive but they stay sharp longer and can withstand more abuse than HSS or diamond blades. HSS blades are less expensive but they dull quickly and are not as durable as carbide blades. Diamond blades are the least expensive but they only last for a few cuts before needing to be replaced.
Blade size is determined by the diameter of the arbor hole on the saw. Makita track saws have either 5/8” or 1” arbor holes. The 5/8” blades are smaller in diameter and are used for making finer cuts. The 1” blades are larger in diameter and are used for making rougher cuts.
Kerf width is the thickness of the blade and is measured in inches. A wider kerf means that more material will be removed with each stroke of the saw, which can save time when cutting large pieces. However, a wider kerf also means that there is more chance of the blade binding in the workpiece, so it is important to select a blade with the appropriate kerf width for the job at hand.
Depth of cut is the maximum distance that the blade can cut through a material in a single pass. Makita track saws have a depth of cut ranging from 1-5/8” to 2-1/4” depending on the model.
The number of teeth on a blade determines how fast or slow the blade will cut through material. More teeth mean a slower but smoother cut, while fewer teeth mean a faster but harsher cut. For most applications, an all-purpose 48T or 50T blade works well. For finer cuts, a 60T or 80T blade may be necessary. For very thick or hard materials, a 24T or 36T demolition blade may be required.
Why Blade For Makita Track Saw Is Necessary?
A track saw is a specialized power tool that is designed for making very precise, clean cuts in wood or other materials. It consists of a small, handheld saw that runs on a track mounted to the work surface. The saw has a narrow blade that protrudes from the bottom of the unit and is guided by the track as it moves along the length of the cut.
Track saws are an essential part of any woodworking shop as they allow for very accurate and consistent cuts to be made with minimal effort. There are many different brands and types of track saws on the market, but Makita makes some of the best-quality units available. Makita’s blades are especially well-suited for use with theirtrack saws since they are made from durable high-speed steel and can withstand repeated use without dulling too quickly.
Our Top Picks For Best Blade For Makita Track Saw
Best Blade For Makita Track Saw Guidance
Makita B-57342 6-1/2″ 56T Carbide-Tipped Cordless Plunge Saw Blade
Makita’s B-57342 6-1/2″ 56T Carbide-Tipped Cordless Plunge Saw Blade is the perfect tool for cutting wood, MDF and laminate. With its high-grade Carbide tips, it provides up to 140% more cuts per charge compared to our standard corded plunge saw blade, making it a durable and reliable choice. Additionally, its fluorine coating reduces pitch buildup for smoother cuts, while its laser cut slots enable quieter cutting and less vibration.
Common Questions on Makita B-57342 6-1/2″ 56T Carbide-Tipped Cordless Plunge Saw Blade
• What is the diameter of the Makita B-57342 6-1/2″ 56T Carbide-Tipped Cordless Plunge Saw Blade?The diameter of the Makita B-57342 6-1/2″ 56T Carbide-Tipped Cordless Plunge Saw Blade is 6.5 inches.
• What is the kerf of the Makita B-57342 6-1/2″ 56T Carbide-Tipped Cordless Plunge Saw Blade?
The kerf of the Makita B-57342 6-1/2″ 56T Carbide-Tipped Cordless Plunge Saw Blade is 0.062 inches.
• What is the arbor size of the Makita B-57342 6-1/2″ 56T Carbide-Tipped Cordless Plunge Saw Blade?
The arbor size of the Makita B-57342 6-1/2″ 56T Carbide-Tipped Cordless Plunge Saw Blade is 5/8 inches.
• What is the maximum speed of the Makita B-57342 6-1/2
Why We Like This
• 56T carbide tipped blade for cutting wood, MDF, and laminate• Up to 140% more cuts per charge than a standard corded plunge saw blade• High grade carbide tips for durability• Fluorine coating to reduce pitch buildup• Laser cut slots for quieter cutting and less vibration
Additional Product Information
| Height | 9.5 Inches |
| Length | 0.25 Inches |
| Weight | 0.45 Pounds |
Makita A-99960 6-1/2″ 28T Carbide-Tipped Cordless Plunge Saw Blade
Makita A-99960 6-1/2″ 28T Carbide-Tipped Cordless Plunge Saw Blade is the perfect accessory for your Makita cordless 6-1/2″ plunge circular saw. These high-grade Carbide tips are extremely durable, and the laser cut slots allow for quieter cutting and less vibration. These blades are perfect for rip cuts in wood, and they’re made from fully hardened and expertly hand-tensioned steel saw plates for truly accurate cuts.
Common Questions on Makita A-99960 6-1/2″ 28T Carbide-Tipped Cordless Plunge Saw Blade
• How many teeth does the Makita A-99960 6-1/2″ Carbide-Tipped Cordless Plunge Saw Blade have?The Makita A-99960 6-1/2″ Carbide-Tipped Cordless Plunge Saw Blade has 28 teeth.
• What is the diameter of the Makita A-99960 6-1/2″ Carbide-Tipped Cordless Plunge Saw Blade?
The Makita A-99960 6-1/2″ Carbide-Tipped Cordless Plunge Saw Blade has a diameter of 6-1/2 inches.
• What is the kerf of the Makita A-99960 6-1/2″ Carbide-Tipped Cordless Plunge Saw Blade?
The Makita A-99960 6-1/2″ Carbide-Tipped Cordless Plunge Saw Blade has a kerf of 0.098 inches.
• What is the arbor size of the Makita A-99960 6-1/2″ Carbide-Tipped Cordless Plunge Saw Blade?
The Makita A
Why We Like This
• 1. High grade Carbide tips for durability• 2. Laser cut slots for quieter cutting and less vibration• 3. For rip cuts in wood• 4. Fully Hardened and expertly hand tensioned steel saw plates for true cuts• 5. Makita A 99960 6 1/2″ 28T Carbide Tipped Cordless Plunge Saw Blade is for cutting wood with Makita cordless 6 1/2″ plunge circular saw
Additional Product Information
| Height | 9.5 Inches |
| Length | 0.25 Inches |
| Weight | 0.56 Pounds |
Makita A-99982 6-1/2″ 60T (ATB) Carbide-Tipped Cordless Plunge Saw Blade
Makita A-99982 6-1/2″ 60T (ATB) Carbide-Tipped Cordless Plunge Saw Blade is designed for fine cutting of MDF and laminate with Makita 6-1/2″ cordless plunge circular saw. The blade is made of high-grade Carbide for durability and has laser cut slots for quieter cutting and less vibration. The Fluorine coating reduces pitch buildup for smoother cuts.
Common Questions on Makita A-99982 6-1/2″ 60T (ATB) Carbide-Tipped Cordless Plunge Saw Blade
• What is the type of Saw Blade?Makita A-99982 6-1/2″ 60T (ATB) Carbide-Tipped Cordless Plunge Saw Blade
• What is the best use for this blade?
The blade is best used for plunge cuts in softwood, hardwood, chipboard, and plywood.
• What is the length of the blade?
The length of the blade is 6-1/2″.
• What is the number of teeth on the blade?
The number of teeth on the blade is 60.
• What is the kerf of the blade?
The kerf of the blade is 0.073”.
Why We Like This
• 1. The ATB tooth design is ideal for fine cutting of MDF and laminate.• 2. The high grade Carbide tips are extremely durable.• 3. The laser cut slots allow for quieter cutting and less vibration.• 4. The Fluorine coating reduces pitch buildup for smoother cuts.• 5. This blade is engineered for smoother cutting overall.
Additional Product Information
| Height | 9.5 Inches |
| Length | 0.25 Inches |
| Weight | 0.6 Pounds |
Makita D-67038 6-1/2″ 40T Carbide-Tipped Circular Saw Blade, Fine Finish
Makita D-67038 6-1/2″ 40T Carbide-Tipped Circular Saw Blade is designed for cordless saws to permit more cuts per charge. Its ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
This blade is perfect for fine finish ripping, crosscutting, and miter cutting thanks to its fully hardened and expertly hand-tensioned steel saw plates. And with a 5/8″ arbor, it’s compatible with most 6-1/2″ cordless circular saws. So if you’re looking for a top-quality blade that can handle a variety of different cuts, the Makita D-67038 is a great option to consider.
Common Questions on Makita D-67038 6-1/2″ 40T Carbide-Tipped Circular Saw Blade, Fine Finish
• What is the kerf of the Makita D-67038 6-1/2″ 40T Carbide-Tipped Circular Saw Blade, Fine Finish?The kerf of the Makita D-67038 6-1/2″ 40T Carbide-Tipped Circular Saw Blade, Fine Finish is 0.098″.
• What is the plate thickness of the Makita D-67038 6-1/2″ 40T Carbide-Tipped Circular Saw Blade, Fine Finish?
The plate thickness of the Makita D-67038 6-1/2″ 40T Carbide-Tipped Circular Saw Blade, Fine Finish is 0.040″.
• What is the arbor size of the Makita D-67038 6-1/2″ 40T Carbide-Tipped Circular Saw Blade, Fine Finish?
The arbor size of the Makita D-67038 6-1/2″ 40T Carbide-Tipped Circular Saw Blade, Fine Finish is 5/8″.
• How many teeth does the Makita D-67038 6-1/2″ 40T Carbide-
Why We Like This
• 1.40 teeth for fine finish ripping, crosscutting, and miter cutting• 2. Ultra thin kerf carbide tipped design for smoother cuts with less drag on the motor and minimal material loss• 3. Specially designed for cordless saws to permit more cuts per charge• 4. Fully hardened and expertly hand tensioned steel saw plates for true cuts• 5. For use with 6 1/2″ Cordless Circular Saws with 5/8″ arbor
Additional Product Information
| Height | 8.07 Inches |
| Length | 0.39 Inches |
| Weight | 0.527 Pounds |
Makita A-99948 6-1/2″ 64T Carbide-Tipped UltraThin Kerf Saw Blade
Makita A-99948 6-1/2″ 64T Carbide-Tipped UltraThin Kerf Saw Blade is one of the most versatile and powerful saw blades on the market. With its unique ATAFR (Alternate Top Alternate Face with Raker) carbide tips, the blade can easily handle a range of different materials with ease, making it the perfect choice for a variety of different applications. The blade’s high grade Tungsten Carbide tips also make it exceptionally durable, meaning that it will be able to withstand even the most demanding projects. Additionally, the blade’s special coating helps to reduce pitch build-up, ensuring that your cuts are smoother and more precise.
Common Questions on Makita A-99948 6-1/2″ 64T Carbide-Tipped UltraThin Kerf Saw Blade
• What is the diameter of the Makita A-99948 6-1/2″ 64T Carbide-Tipped UltraThin Kerf Saw Blade?The diameter of the Makita A-99948 6-1/2″ 64T Carbide-Tipped UltraThin Kerf Saw Blade is 6.5 inches.
• How many teeth does the Makita A-99948 6-1/2″ 64T Carbide-Tipped UltraThin Kerf Saw Blade have?
The Makita A-99948 6-1/2″ 64T Carbide-Tipped UltraThin Kerf Saw Blade has 64 teeth.
• What is the kerf of the Makita A-99948 6-1/2″ 64T Carbide-Tipped UltraThin Kerf Saw Blade?
The kerf of the Makita A-99948 6-1/2″ 64T Carbide-Tipped UltraThin Kerf Saw Blade is 0.063 inches.
• What is the bore diameter of the Makita A-99948 6-1/2″ 64T Carbide-Tipped UltraThin Ker
Why We Like This
• 1. Up to 70% more cuts per charge compared to standard blades• 2. Up to 70% faster cutting compared to standard blades• 3. High grade Tungsten Carbide tips for durability• 4. Special ATAFR (Alternate Top Alternate Face w/ Raker) carbide tips provide smoother and faster cuts• 5. Blade coating provides reduced pitch build up for smoother cuts
Additional Product Information
| Height | 9.5 Inches |
| Length | 0.24 Inches |
| Weight | 0.44 Pounds |
Benefits of Blade For Makita Track Saw
A track saw is a versatile and powerful tool that can be used for a variety of projects. While it may not be the first choice for every job, it can make quick work of many tasks that would otherwise be time-consuming or difficult.
One of the greatest advantages of using a track saw is the straighter, cleaner cuts it produces. This is due to the fact that the blade is mounted on a rigid rail, which helps to keep it perfectly perpendicular to your workpiece. This results in less chance for error and waste material, as well as providing you with neater, more professional looking results.
Another big advantage track saws have over standard circular saws is their portability and ease of use. Because they are so compact and lightweight, they can easily be transported from one job site to another without any hassle. Additionally, most models come with easy-to-follow instructions which makes them perfect for both beginners and experienced woodworkers alike.
Buying Guide for Best Blade For Makita Track Saw
When choosing a blade for your Makita track saw, consider the following:
-The type of material you will be cutting the most often. Makita blades are designed for specific materials, so choose one that is best suited for the majority of your projects.
-The thickness of the material you will be cutting. Track saws can handle thicker materials than traditional handheld saws, but different blades are better suited for different thicknesses.
-Your budget. Blades range in price from around $20 to $100 or more, so decide how much you are willing to spend on a blade.
-The warranty. Some manufacturers offer warranties on their products, so check to see if the blade you are considering has one before making your purchase.
Frequently Asked Question
What is the best blade for a Makita track saw?
The best blade for a Makita track saw is the Makita B-07979 circular saw blade. It is specifically designed for use with the Makita track saw and is made from high-quality materials that will last for many years.
What are the different types of blades available for a Makita track saw?
The different types of blades available for a Makita track saw are: -Standard blade: This is the most common type of blade and is used for most general purpose cutting. -Fine tooth blade: This blade is designed for making precision cuts and is ideal for cutting thinner materials. -Coarse tooth blade: This blade is designed for making aggressive cuts and is ideal for cutting thicker materials.
What are the pros and cons of each type of blade?
The pros of a straight blade are that it is simple and effective. The cons are that it can be difficult to control and can cause injuries if not used correctly. The pros of a curved blade are that it is more aerodynamic and can be used to slice more effectively. The cons are that it can be difficult to control and can cause injuries if not used correctly.
What are the most popular brands of blades for a Makita track saw?
There are many different brands of blades that can be used with a Makita track saw, but some of the most popular brands include Diablo, Freud, and Bosch.
How do I choose the best blade for my Makita track saw?
It really depends on what you will be using the track saw for. If you need to make precision cuts, then you will want to choose a blade with a smaller teeth count. If you are just making general cuts, then you can choose a blade with a higher teeth count.
Conclusion
The Makita track saw is the best blade for making clean, precise cuts. It’s easy to use and delivers accurate results every time. Whether you’re a professional contractor or a DIYer, the Makita track saw is the perfect tool for your next project.