Why Ball Joint Separator Tool Is Necessary?
A ball joint separator is a specialized tool used to separate the ball joint from the control arm. It is designed to fit between the small gap in the ball joint housing and safely pry it out without damaging other components.
Many times, when a vehicle’s suspension system begins to fail, it is due to worn out or damaged ball joints. In order to replace them, the old ones must first be removed. A ball joint separator makes this process much easier and quicker, so that the repairs can be made as quickly as possible.
Our Top Picks For Best Ball Joint Separator Tool
Best Ball Joint Separator Tool Guidance
GEARWRENCH Ball Joint Separator – 3916D
A ball joint separator is a handy tool that makes it easy to separate the ball joint from the spindle support arm on any front wheel drive vehicle – both domestic and import. This particular ball joint separator from Gearwrench is adjustable to accommodate different size ball joints, and is suitable for use on most cars and light trucks (not intended for use on 3/4 ton or 1 ton trucks). To use, simply place the separator over the ball joint and lever the two handles apart to loosen the joint. The separator has a slot that is 7/8″ wide by 1-1/4″ deep, and works on ball joints from 1-1/8” to 2-1/8” in size.
Common Questions on GEARWRENCH Ball Joint Separator – 3916D
• What is the GEARWRENCH Ball Joint Separator used for?The GEARWRENCH Ball Joint Separator is used to separate ball joints from suspension components.
• What size ball joint does the GEARWRENCH Ball Joint Separator fit?
The GEARWRENCH Ball Joint Separator fits most sizes of ball joints.
• How is the GEARWRENCH Ball Joint Separator used?
The GEARWRENCH Ball Joint Separator is used by positioning it over the ball joint and then striking the separator with a hammer to release the ball joint from the suspension component.
• What are the benefits of using the GEARWRENCH Ball Joint Separator?
The GEARWRENCH Ball Joint Separator is designed for easy separation of ball joints from suspension components and is less likely to damage the ball joint than other methods of separation.
• Where can I purchase the GEARWRENCH Ball Joint Separator?
The GEARWRENCH Ball Joint Separator is available at most auto parts stores.
Why We Like This
Additional Product Information
| Color | Original Version |
| Height | 2.75 Inches |
| Length | 11 Inches |
| Weight | 1 Pounds |
Orion Motor Tech 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)
Orion Motor Tech’s 5-in-1 ball joint separator, pitman arm puller, tie rod end tool set is the perfect toolkit for performing a wide range of front end service tasks on domestic and import vehicles. The hardened alloy construction and versatile design of the tools make them ideal for removing stubborn ball joints, tie rod ends, and pitman arms. The custom-molded case is crafted from high-quality ABS hard plastic, keeping all your tools organized and secure in one place. Orion Motor Tech promises the quality of their tools and want to ensure you’re only getting the best.
Common Questions on Orion Motor Tech 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)
• What is the name of the product?Orion Motor Tech 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)
• What is the best feature of the product?
The five-in-one design makes this toolset ideal for front end service on most vehicles.
• What are the dimensions of the product?
The dimensions are 18.5” x 11” x 3.5”.
• What is the weight of the product?
The weight is 15.2 pounds.
• What is the warranty?
There is a one-year warranty.
Why We Like This
• ABS hard plastic carrying case included• Hardened alloy construction for durability• Compatible with a wide range of vehicles• Pitman arm remover, ball joint separator, and tie rod end puller in one• Orion Motor Tech promise guarantees quality and satisfaction
Additional Product Information
| Color | Silver |
| Height | 12.2 Inches |
| Length | 15.35 Inches |
Orion Motor Tech Ball Joint Separator, 1-1/8″ to 2-1/8″ Ball Joint Removal Tool for Separating Ball Joints Arms Tie Rods on Cars Trucks ATVs and More, Ball Joint Puller and Extractor with 1/2″ Socket
Orion Motor Tech’s ball joint separator is the perfect tool for quickly and easily separating ball joints, arms, and tie rods from the spindle support arm on domestic and imported cars, trucks, ATVs, and more, without damaging other components. This automotive tool includes a removable pin to fit into two pivot points to adjust to wider working areas and different ball joint sizes; its 1-1/8″ to 2-1/8″ opening range ensures compatibility with most passenger vehicles. Our ball joint removal tool is made from premium AISI 1045 medium carbon steel that has been cold forged and heat treated for superior strength and longevity, while the black oxide coated pins provide optimal corrosion resistance and durability for powerful leverage. This mechanic tool separates ball joints without damaging other components; the included 1/2 inch Cr-V structured socket works with your socket wrench to ensure easy ball joint removal in record time. Orion Motor Tech backs this ball joint puller with strong 1 year warranty and our usual friendly 24/7 customer service, ensuring that you’ll enjoy its dependable use for years to come!
Common Questions on Orion Motor Tech Ball Joint Separator, 1-1/8″ to 2-1/8″ Ball Joint Removal Tool for Separating Ball Joints Arms Tie Rods on Cars Trucks ATVs and More, Ball Joint Puller and Extractor with 1/2″ Socket
• Is the Orion Motor Tech Ball Joint Separator 1-1/8″ to 2-1/8″ Ball Joint Removal Tool easy to use?Yes, the Orion Motor Tech Ball Joint Separator 1-1/8″ to 2-1/8″ Ball Joint Removal Tool is easy to use. You simply need to slip the jaws of the ball joint separator over the top and bottom of the ball joint, align the tool with the ball joint caps, and turn the handle to break the ball joint apart.
• What is the maximum width that the jaws of the Orion Motor Tech Ball Joint Separator can accommodate?
The maximum width that the jaws of the Orion Motor Tech Ball Joint Separator can accommodate is 2-1/8″.
• What is the minimum width that the jaws of the Orion Motor Tech Ball Joint Separator can accommodate?
The minimum width that the jaws of the Orion Motor Tech Ball Joint Separator can accommodate is 1-1/8″.
• What is the maximum width that the jaws of the Orion Motor Tech Ball Joint Separator can accommodate?
The maximum width that the jaws of the Orion Motor Tech Ball
Why We Like This
• • Made from premium AISI 1045 medium carbon steel for superior strength and longevity• Black oxide coated pins provide optimal corrosion resistance and durability• Includes a removable pin to fit into two pivot points for wider working areas and different ball joint sizes• Separates ball joints without damaging other components• Backed by a strong 1 year warranty
Additional Product Information
| Color | black |
| Height | 3 Inches |
| Length | 9 Inches |
| Weight | 3 Pounds |
DASBET Universal Ball Joint Separator Remover Tool for Separating Arms, Tie Rods, and Ball Joints
Are you looking for an easy way to separate ball joints from the spindle arm on your car or truck? If so, then you need the DASBET ball joint separator tool. This ball joint removal kit features a strong steel construction and pins with black oxide coating for all the strength and durability you need. The DASBET ball joint separator tool is designed specifically for quick and easy separation of a vehicle’s ball joint from the spindle support arm. It is also universal compatible with both domestic and import front wheel drive vehicles. To use, simply slip the forked end between the boot and metal attachment point, be sure the pivot finger is squarely on the threaded end, and tightening the bolt until you have a good amount of resistance. Then, tap the attachment point and or the finger with a hammer and tighten some more and tap again. Once the stud comes loose, it will be all at once as the tool falls free and you will hear a “pop”. Make life easier with the right tool for the job and order the DASBET ball joint separator tool today!
Common Questions on DASBET Universal Ball Joint Separator Remover Tool for Separating Arms, Tie Rods, and Ball Joints
• What is the DASBET Universal Ball Joint Separator Remover Tool used for?The DASBET Universal Ball Joint Separator Remover Tool can be used for separating arms, tie rods, and ball joints.
• Why would you use the DASBET Universal Ball Joint Separator Remover Tool?
The DASBET Universal Ball Joint Separator Remover Tool can be used to easily remove ball joints from a vehicle for replacement or repair.
• How do you use the DASBET Universal Ball Joint Separator Remover Tool?
The DASBET Universal Ball Joint Separator Remover Tool is easy to use. Simply place the tool over the ball joint and strike the center pin with a hammer to separate the ball joint from the vehicle. Repeat this process five times with unique values until the ball joint pops out.
Why We Like This
• 1. The DASBET ball joint separator tool separates ball joints from the spindle arm on domestic and import front wheel drive vehicles.• 2. It is designed specifically for quick and easy separation of a vehicle’s ball joint from the spindle support arm.• 3. The ball joint removal kit features a strong steel construction and pins with black oxide coating for all the strength and durability you need.• 4. The ball joint separator is widely used to Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks.• 5. It has an opening range from 1 1/8 inches to 2 1/8 inches.
Additional Product Information
| Height | 4 Inches |
| Length | 3 Inches |
Orion Motor Tech 5pc Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (BL06)
The Orion Motor Tech 5pc Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (BL06) is a versatile toolkit designed to remove ball joints, tie rod ends, and pitman arms on a wide range of domestic and import vehicles. The hardened alloy construction ensures that these tools can stand up to the toughest jobs, while the universal compatibility allows them to be used on a variety of different car makes and models. The professional-grade ABS case keeps all of the tools securely organized in one place, making it the perfect kit for the amateur or professional mechanic.
Common Questions on Orion Motor Tech 5pc Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (BL06)
• What is the weight of the Orion Motor Tech 5pc Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (BL06)?The Orion Motor Tech 5pc Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (BL06) weighs approximately 9.5 pounds.
• What is the length of the longest tool in the set?
The longest tool in the set is the pitman arm puller, which has a reach of approximately 18 inches.
• What is the diameter of the largest tool in the set?
The largest tool in the set is the tie rod end tool, which has a diameter of approximately 3/4 of an inch.
• How many pieces are in the set?
There are 5 pieces in the set.
Why We Like This
Additional Product Information
| Color | Silver + Blue |
| Height | 11.02 Inches |
| Length | 12.99 Inches |
| Weight | 10 Pounds |
Benefits of Ball Joint Separator Tool
Ball joint separator tools are one of the most important tools in a mechanic’s toolbox. They are used to separate ball joints from suspension components so that they can be replaced or repaired. Ball joint separator tools come in a variety of sizes and shapes, but all have the same basic function.
There are many benefits to using ball joint separator tools. They can save time and money by allowing mechanics to quickly and easily replace damaged or worn ball joints. Ball joint separator tools also make it possible to avoid damage to other suspension components when removing a faulty ball joint.
Another benefit of using ball joint separator tool is that they help ensure a proper fit when installing new or replacement parts.
Buying Guide for Best Ball Joint Separator Tool
To separate ball joint from your car, you will need a ball joint separator tool. This tool is also called as pickle fork. Most of the times, this tool comes in a set with other tools like hammer and chisel. A good quality ball joint separator should be able to apply force on the taper area of the tapered stud of the ball joint so that it can be separated from the knuckle easily. While purchasing a ball joint separator, look for one which is made of forged steel for better durability.
Conclusion
If you’re looking for an easy way to separate ball joints from your vehicle, then the best ball joint separator tool is the perfect solution. When used properly, this tool can safely and quickly detach ball joints without damaging surrounding components. It’s easy to use and comes with a money-back satisfaction guarantee, so you can be sure you’re getting the best possible value for your money.