Why Small Block Chevy Roller Rockers Is Necessary?
Roller rockers are one of the best ways to increase valvetrain stability and reduce friction. They work by using precision-machinedrollers instead of the traditional ball-and-socket joint found in most stock rockers. This gives them a much smoother, more precise motion that is less likely to cause harmonics and other problems associated with high-rpm valvetrains. Roller rockers also tend to be much lighter than stock units, which further reduces inertial forces and can free up some horsepower.
Our Top Picks For Best Small Block Chevy Roller Rockers
Best Small Block Chevy Roller Rockers Guidance
Aluminum Roller Rockers 1.7 Ratio 7/16″ Stud for Big Block Chevy 396-454
![Aluminum Roller Rockers 1.7 Ratio 7/16](https://m.media-amazon.com/images/I/51YDlOxBGOL._SL500_.jpg)
If you’re looking for an edge on the competition, look no further than a set of aluminum roller rockers. These 1.7 ratio rockers are perfect for big block Chevy 396-454 engines, and will fit onto 7/16″ studs. With 16 roller rockers in each kit, you’ll be able to achieve a smoother, more consistent valvetrain operation. Plus, the non-self aligning design means that less force is required to actuate the rocker arms, which results in reduced wear and tear on your engine.
Common Questions on Aluminum Roller Rockers 1.7 Ratio 7/16″ Stud for Big Block Chevy 396-454
• What is the ratio for the Aluminum Roller Rockers 1.7?The ratio for the Aluminum Roller Rockers 1.7 is 7/16″ Stud for Big Block Chevy 396-454.
• What is the stud size for the Aluminum Roller Rockers 1.7?
The stud size for the Aluminum Roller Rockers 1.7 is 7/16″ for Big Block Chevy 396-454.
• What engine is the Aluminum Roller Rockers 1.7 for?
The Aluminum Roller Rockers 1.7 is for Big Block Chevy 396-454 engines.
Why We Like This
1. Aluminum roller rockers provide excellent durability and performance
2. The 1.7 ratio is ideal for Big Block Chevys
3. The 7/16″ stud makes for a secure fit
4. The 16 roller rocker arms per kit is a great value
5. The non self aligning feature ensures a precise fit
Additional Product Information
Height | 8 Inches |
Length | 13 Inches |
JEGS Cast Steel Roller Tip Rocker Arms | Fits 1955-1986 Small Block Chevy Engines | 1.5 Ratio | For 3/8 Inch Rocker Arm Studs | For Camshafts Up To .550 Inch Lift | Set of 16
![JEGS Cast Steel Roller Tip Rocker Arms | Fits 1955-1986 Small Block Chevy Engines | 1.5 Ratio | For 3/8 Inch Rocker Arm Studs | For Camshafts Up To .550 Inch Lift | Set of 16](https://m.media-amazon.com/images/I/41HYxibYiDL._SL500_.jpg)
If you’re looking tomaximize power output from your 1955-1986 Small Block Chevy engine, JEGS has the perfect solution withtheir cast steel roller tip rocker arms. These top-of-the-line rockers feature a roller tip designwhich eliminates valve stem and guide wear, while their heat-treated grooved rocker pivot balls promoteoiling and prevent galling. The cast 4340 alloy steel body ensures strength and durability, while their 1.5ratio is perfect for camshafts up to .550 inch lift. Rated for up to 350 lbs. of valve spring pressure, theseJEGS cast steel roller tip rocker arms are sure to give you the edge on the competition.
Common Questions on JEGS Cast Steel Roller Tip Rocker Arms | Fits 1955-1986 Small Block Chevy Engines | 1.5 Ratio | For 3/8 Inch Rocker Arm Studs | For Camshafts Up To .550 Inch Lift | Set of 16
• What is the JEGS cast steel roller tip rocker arms’ fit?1955-1986 Small Block Chevy Engines
• What is the JEGS cast steel roller tip rocker arms’ ratio?
1.5
• What is the JEGS cast steel roller tip rocker arms’ required rocker arm stud size?
3/8 inch
• What is the JEGS cast steel roller tip rocker arms’ maximum lift for the camshaft?
.550 inch
• How many JEGS cast steel roller tip rocker arms are in a set?
16
Why We Like This
• 1) Rocker arm reduces friction, adding an additional 10 15 horsepower• 2) Roller tip design prevents valve stem and guide wear• 3) Rated for up to 350 lbs of valve spring pressure• 4) Heat treated grooved rocker pivot balls promote oiling & prevent galling• 5) Cast 4340 alloy steel body for strength and durability
Additional Product Information
Height | 2.3 Inches |
Length | 16.6 Inches |
Weight | 6 Pounds |
Performance Chevy SBC Small Block Chevy 350 1.6 Ratio 3/8” Aluminum Rocker Arms Red anodized (DM-AL3501638)
![Performance Chevy SBC Small Block Chevy 350 1.6 Ratio 3/8'' Aluminum Rocker Arms Red anodized (DM-AL3501638)](https://m.media-amazon.com/images/I/51MptDEAD9L._SL500_.jpg)
Performance Chevy SBC Small Block Chevy 350 1.6 Ratio 3/8” Aluminum Rocker Arms Red anodized (DM-AL3501638) are crafted from premium quality materials to provide high yield strength and resist deflection and extraordinary fatigue resistance. They feature full complement friction-reducing needle bearings and an exceptional design that provides plenty of clearance for higher open valve spring pressures. Each rocker body is polished and carefully assembled and inspected to provide the finest rocker arms available in today’s racing and high performance industry. A good quality set of Aluminum alloy rocker arms is sure to pay big dividends in performance. These rocker arms ship from the United States.
Common Questions on Performance Chevy SBC Small Block Chevy 350 1.6 Ratio 3/8” Aluminum Rocker Arms Red anodized (DM-AL3501638)
• What is the purpose of 3/8” aluminum rocker arms?3/8” aluminum rocker arms are designed to reduce weight and friction in the valvetrain while providing improved strength and durability.
• What are the dimensions of the rocker arms?
The rocker arms are 3/8” in diameter and have a 1.6 ratio.
• What material are the rocker arms made from?
The rocker arms are made from aluminum and are anodized red for corrosion resistance.
• How do I install the rocker arms?
The rocker arms must be installed on the studs before the pushrods and then adjusted so that they are in the correct position.
Why We Like This
• 1. Manufactured from premium quality material for high yield strength and resistance to deflection and fatigue• 2. Full complement friction reducing needle bearings for smooth operation• 3. Exceptional design provides plenty of clearance for higher open valve spring pressures• 4. Polished top lines for a sleek appearance• 5. Carefully assembled and inspected for the highest quality
UnayKolb Small Block Chevy 1.5 3/8 Stainless Steel Roller Rocker Arms Sbc 305 350 400
![UnayKolb Small Block Chevy 1.5 3/8 Stainless Steel Roller Rocker Arms Sbc 305 350 400](https://m.media-amazon.com/images/I/41+7EGG8exL._SL500_.jpg)
UnayKolb Small Block Chevy 1.5 3/8 Stainless Steel Roller Rocker Arms Sbc 305 350 400 are built of 15-5PH material which gives you superior strength over other stainless rockers They have more needle bearings which increases strength while reducing friction Built to clear 155″ valve springs.
Specially cast and machined for larger valve springs and retainers Light weight with integral pushrod seat. Oversize trunions and full roller precision needle and cage bearings More needle bearings for increased performance and rocker life CNC machined pushrod cups and heat-treated Cr40 roller tips Internal oiling system for long lasting performance HD Polylocks included.
Common Questions on UnayKolb Small Block Chevy 1.5 3/8 Stainless Steel Roller Rocker Arms Sbc 305 350 400
• What is the most important advantage of UnayKolb rocker arms?The most important advantage of UnayKolb rocker arms is that they allow for a more efficient transfer of energy, which results in increased performance.
• Why are UnayKolb rocker arms made of stainless steel?
UnayKolb rocker arms are made of stainless steel because it is a more durable material than aluminum, and it is also resistant to corrosion.
• What is the benefit of using roller rocker arms?
Roller rocker arms provide a number of benefits, including increased durability, reduced friction, and improved performance.
Why We Like This
• Superior strength over other stainless rockers• Built to clear 155″ valve springs• Specially cast and machined for larger valve springs and retainers• Light weight with integral pushrod seat• Oversize trunions and full roller precision needle and cage bearings
Assault Racing Products ARA45417716 Big Block Chevy Polylock Aluminum Rocker Arms 1.7 Ratio 7/16 Stud BBC
![Assault Racing Products ARA45417716 Big Block Chevy Polylock Aluminum Rocker Arms 1.7 Ratio 7/16 Stud BBC](https://m.media-amazon.com/images/I/51L2fwX6qvL._SL500_.jpg)
If you’re looking for a quality set of rocker arms for your big block Chevy, you can’t go wrong with Assault Racing Products’ ARA45417716 polylock aluminum rocker arms. These rockers feature a 1.7 ratio and 7/16″ stud, and are made from 6061-T6 aluminum for strength and durability. They also feature polylock nuts to keep everything tight, as well as roller tips for reduced friction. This set of 16 rocker arms is a great choice for any big block Chevy build.
Common Questions on Assault Racing Products ARA45417716 Big Block Chevy Polylock Aluminum Rocker Arms 1.7 Ratio 7/16 Stud BBC
• What is the part number for the Assault Racing Products ARA45417716 Big Block Chevy Polylock Aluminum Rocker Arms 1.7 Ratio 7/16 Stud BBC?The part number is ARA45417716.
• What is the ratio of the Assault Racing Products ARA45417716 Big Block Chevy Polylock Aluminum Rocker Arms 1.7 Ratio 7/16 Stud BBC?
The ratio is 1.7.
• What is the material of the Assault Racing Products ARA45417716 Big Block Chevy Polylock Aluminum Rocker Arms 1.7 Ratio 7/16 Stud BBC?
The material is aluminum.
• What is the finish of the Assault Racing Products ARA45417716 Big Block Chevy Polylock Aluminum Rocker Arms 1.7 Ratio 7/16 Stud BBC?
The finish is clear anodized.
• What is the weight of the Assault Racing Products ARA45417716 Big Block Chevy Polylock Aluminum Rocker Arms 1.7 Ratio 7/16 Stud BBC?
The weight is 1.7 lbs.
Why We Like This
• 6061 T6 aluminum construction• Set of 16• 7/16″ stud• 1.7 ratio• Includes polylocks• Roller tips
Benefits of Small Block Chevy Roller Rockers
If you are looking for a way to improve the performance of your small block Chevy, then a set of best small block Chevy roller rockers is a great option. Roller rockers can offer a number of benefits over stock rockers, including increased durability and improved performance.
Durability is one of the biggest advantages that roller rockers offer. They are able to withstand more abuse than stockrockers, and they will not break as easily. This means that you can enjoy increased performance without having to worry about damaging your engine.
Buying Guide for Best Small Block Chevy Roller Rockers
There are a few things to consider when purchasing roller rockers for small block Chevy engines. It is important to first determine whatrockers will fit your specific engine. Many different brands make roller rockers, so it is important to find the ones that are compatible with your engine. Once you have determined which brand and size will fit your engine, you can then decide on which style of roller rocker you would like. There are many different styles available, so it is important to choose the one that best suits your needs. You also need to consider the price of the roller rockers when making your purchase.
Frequently Asked Question
What is the best way to install small block Chevy roller rockers?
Many mechanics and car enthusiasts recommend using the following method: 1. Remove the pushrods from the engine. 2. Install the rockers on the studs, making sure that the rockers are in the correct position for the correct pushrod. 3. Install the pushrods, making sure that they are properly seated in the rockers. 4. Re-install the engine’s valve covers.
What are the benefits of using roller rockers on a small block Chevy?
Roller rockers can offer a number of benefits on a small block Chevy, including increased valve lift, increased durability, and reduced friction. Additionally, roller rockers can offer weight savings over stock rockers, and can also help to improve the aesthetics of your engine bay.
What are the drawbacks of using roller rockers on a small block Chevy?
Some potential drawbacks of using roller rockers on a small block Chevy include: 1) the added cost of roller rockers versus non-roller rockers; 2) the potential for increased noise due to the higher lift and increased valvetrain speed; and 3) the need for more frequent adjustments due to the higher lift and increased valvetrain speed. Additionally, some experts believe that roller rockers can adversely affect valvetrain stability and lead to increased wear, especially on the valve tips.
What is the optimal camshaft and valvetrain configuration for a small block Chevy with roller rockers?
Some popular camshaft and valvetrain configurations for small block Chevy engines with roller rockers include the following: -A small block Chevy with roller rockers can benefit from a camshaft with a relatively aggressive profile. This can help to improve airflow through the engine and increase power output. -A common valvetrain configuration for small block Chevy engines with roller rockers is a 1.6:1 rocker ratio. This can help to improve valvetrain stability and allow for higher lift camshafts to be used. -It is also important to use high-quality, high-strength components when building a small block Chevy with roller rockers. This can help to ensure reliability and prevent component failure at high engine speeds.
How can I improve the performance of my small block Chevy with roller rockers?
One way to improve the performance of your small block Chevy with roller rockers is to install a higher performance camshaft. This will allow the engine to breathe better and make more power. Another way to improve performance is to install a set of headers. This will help the engine to expel exhaust gases more efficiently and make more power. Finally, you can also install a higher performance intake manifold. This will help the engine to draw in more air and make more power.
Conclusion
Buyer may be convinced to buy product on best small block chevy roller rockers if the sales pitch concludes with information about how the product can improve performance, save money, and provide peace of mind. The sales pitch should also emphasize the importance of choosing a reputable brand like Comp Cams or JE Pistons.