Why Pulley Puller For Power Steering Pump Is Necessary?
The power steering pump is responsible for providing hydraulic pressure to the power steering system. A common failure of the power steering system is a loss of hydraulic pressure, which can be caused by a variety of factors. One of the most common causes of hydraulic pressure loss is a leak in the power steering pump. A pulley puller for power steering pump can be used to remove the pulley from the pump so that it can be inspected for damage or replaced if necessary.
Our Top Picks For Best Pulley Puller For Power Steering Pump
Best Pulley Puller For Power Steering Pump Guidance
Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605
If you’re looking for a reliable, durable and easy to use power steering and alternator pulley remove and install tool set, look no further than Powerbuilt. Our tool sets are built to exceed tool standards and come with everything you need to remove and install pulleys on most power steering pumps. Plus, our storage case includes usage photos to help make your job even easier. Kit 20 includes 14 pieces for removal and installation of the power steering pump and alternator pulleys.
Common Questions on Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605
• What is the weight of the Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605?The Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605 weighs approximately 9.5 pounds.
• What is the width of the Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605?
The Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605 is approximately 12 inches wide.
• What is the height of the Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605?
The Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605 is approximately 13 inches tall.
Why We Like This
• Made to be the most reliable tools in the market today• Tool solutions for most all situations• Built to exceed tool standards• Tool set for removal and installation of power steering pump and alternator pulleys• For use on most power steering pump pulleys• Includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve• Storage case includes usage photos• Kit 20 includes 14 Piece for removal and installation of the power steering pump and alternator pulleys
Additional Product Information
| Color | Black |
| Height | 7.25 Inches |
| Length | 3 Inches |
| Weight | 2 Pounds |
OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green
The OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit is a great way to remove and install power steering pump pulleys on most domestic vehicles. The kit comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps. The power steering pump pulley remover is also great for pulled pulleys on GM belt-driven vacuum pumps. The power steering pump pulley installer is composed of rugged steel for long-lasting strength and durability. The kit also comes with a molded carrying case for safe storage and easy portability.
Common Questions on OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green
• Where can I find the instructions for this product?The instructions can be found printed on the side of the product packaging.
• How do I know if this product is compatible with my vehicle?
This product is compatible with most domestic vehicles. If you have any further questions, please contact customer service.
• What are the dimensions of this product?
This product measures 12.2″ x 9.1″ x 3.1″.
Why We Like This
• POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles; Power steering pulley remover pulls pressed on water pump pulleys of GM V6 engines.• WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps; Pulls pulleys on GM belt driven vacuum pumps.• HEAVY DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long lasting strength and durability; Power steering pump pulley installer designed to tackle any small pulley job.• CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability; Take this power steering pump puller/installer from job to job while keeping your puller kit organized.• PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1
Additional Product Information
| Color | green |
| Height | 1 Inches |
| Length | 1 Inches |
Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
Whether you’re a professional mechanic or a passionate do-it-yourselfer, you know that having the right tools makes all the difference in getting the job done right. That’s why the Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set is such a valuable addition to your toolbox.
This complete 7-piece pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool. The reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right. They’re also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles. It’s also compatible with the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines. The two forcing screws also work with most
Common Questions on Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
• What is the name of the company that makes this product?Orion Motor Tech
• What type of product is this?
It is a Power Steering Pump Pulley Puller/Installer Tool Set
• What is this product used for?
It is used to remove and install power steering pump pulleys
• Which vehicles is this product compatible with?
It is compatible with Ford, GM, and Chrysler vehicles
• How many times should this process be repeated?
This process should be repeated five times
Why We Like This
• A complete 7 piece set that includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool• Constructed from structural grade AISI 1045 medium carbon steel for the necessary strength to get your work done right• Compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles• User friendly and comes with clear instructions for easy step by step operation• Custom blow molded case keeps everything well organized and easy to store or carry between jobs
Additional Product Information
| Color | black |
| Height | 2 Inches |
| Length | 9 Inches |
| Weight | 2 Pounds |
Thorstone Power Steering Pulley Puller Installer Kit for Water Pump, Vacuum Pump Pulleys Installation Remover on Most Engines
The Thorstone Power Steering Pulley Puller Installer Kit is designed for removing and installing pressed-on alternator, power steering pump and other pulleys. It is made of high carbon steel construction and excellent manufacturing process, exquisite mold and screws for your comfort. The package includes a blow molded carrying case for easy transportation, safe storage and quick organization.
Common Questions on Thorstone Power Steering Pulley Puller Installer Kit for Water Pump, Vacuum Pump Pulleys Installation Remover on Most Engines
• What is the Thorstone Power Steering Pulley Puller Installer Kit?The Thorstone Power Steering Pulley Puller Installer Kit is a tool that is used to remove and install water pump, vacuum pump, and alternator pulleys on most engines.
• What engines is the Thorstone Power Steering Pulley Puller Installer Kit compatible with?
The Thorstone Power Steering Pulley Puller Installer Kit is compatible with most engine types.
• How many times should the process be repeated when using the Thorstone Power Steering Pulley Puller Installer Kit?
The Thorstone Power Steering Pulley Puller Installer Kit should be used five times with unique values in order to properly install or remove the desired pulley.
Why We Like This
• Made of high carbon steel construction for durability• Includes special adapters for GM 32 Quad 4 engines and Ford Modular engines• Exquisite mold and screws for your comfort• Blow molded carrying case for easy transportation, safe storage and quick organization• Backed by Thorstone’s lifetime support
Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler
Over time, power steering pumps can become seized or damaged, making it difficult or even impossible to remove the pulley. This can be a real pain, especially if you don’t have the right tools. With the Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, you can easily remove and install any pump pulley with a 1-1/8″, 1-1/4″, 1-5/16″, or 1-3/8″ hub diameter.
This 7-piece set includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool. The reversible puller jaw design lets you check and repair pulley flanges with ease. Each of the power steering tools is made from structural-grade AISI 1045 medium carbon steel for strength and durability. They’re also heat treated and blackened for superior corrosion resistance.
The Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles. It also works with belt-driven vacuum pumps and press-on water pump pulleys
Common Questions on Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler
• What is the maximum torque that the Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools can handle?The maximum torque that the Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools can handle is 500 ft-lbs.
• What is the minimum torque that the Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools can handle?
The minimum torque that the Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools can handle is 10 ft-lbs.
• How many different sizes of pulleys does the Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools accommodate?
The Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools accommodate pulleys with diameters ranging from 1.5″ to 4.5″.
• What is the weight of the Orion Motor Tech Power Steering Pump
Why We Like This
• 1. A complete 7 piece set that includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.• 2. Constructed from structural grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.• 3. Heat treated and blackened for even greater dependability and superior corrosion resistance.• 4. Compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles.• 5. The two forcing screws also work with most VW vehicles’ power steering systems.
Additional Product Information
| Color | black |
| Height | 2 Inches |
| Length | 9 Inches |
| Weight | 2 Pounds |
Benefits of Pulley Puller For Power Steering Pump
A pulley puller is a specialized tool used to remove belts or other mechanical parts that are attached to a rotating shaft. One end of the tool is inserted into the space between the body of the part and the wall of the housing, while the other end engages a ratchet or similar mechanism. The device uses leverage to pry the part off of its shaft, making it an essential tool for anyone who works on machinery.
There are many benefits to using a pulley puller over other methods of removing mechanical parts. First, it is much safer than using brute force. Second, it protects both you and your tools from damage that can occur when attempting to remove parts without proper equipment.
Buying Guide for Best Pulley Puller For Power Steering Pump
There are a few things you should keep in mind when purchasing a pulley puller for your power steering pump. Firstly, consider the weight and size of the pulley itself – you will need a tool that can handle the specific dimensions of your particular model. Secondly, think about the material the puller is made from – choose something durable and long-lasting. Finally, factor in any additional features that may be useful, such as an extendable handle or built-in storage compartment. With these factors in mind, take a look at some of the best pulley pullers on the market:
1) The ABN Power Steering Pulley Puller & Installer Set is crafted from heat-treated carbon steel for durability and strength. The set includes two different sized jaws to fit most power steering pumps, and also features an extendable handle for added leverage.
2) The OEMTools 27115 Power Steering Pump Pulley Puller is another excellent choice, made from forged and heat-treated steel for lasting use. This model boasts extended reach jaws to accommodate larger pulleys, and also comes with a handy storage case.
3) For something slightly different, check out the Lisle 58650 Power Steering Pulley Puller/Installer Set. This unique set includes three different sized jaws to fit virtually any power steering pump pulley, plus an easy-grip handle for comfort during use
Frequently Asked Question
What are the best pulley pullers for power steering pumps?
There are a few different types of pulley pullers that can be used for power steering pumps, but the best ones are typically the ones that are made specifically for that purpose. There are a few different brands that make pulley pullers for power steering pumps, so it might be a good idea to do some research to see which ones are highly rated before making a purchase.
What are the features of a good pulley puller for power steering pumps?
A good pulley puller should be made of durable materials, have a comfortable grip, and be easy to use.
What are the benefits of using a pulley puller for power steering pumps?
There are many benefits of using a pulley puller for power steering pumps. Some of these benefits include: 1. Increased efficiency – Using a pulley puller can help increase the efficiency of your power steering pump by up to 30%. This means that your pump will be able to move more fluid with less effort, making it easier for you to steer your vehicle. 2. Reduced wear and tear – Another benefit of using a pulley puller is that it can help reduce wear and tear on your power steering pump. This is because the pulley puller takes some of the load off of the pump, which reduces the amount of stress that is placed on the pump. 3. Longer pump life – perhaps the most important benefit of using a pulley puller is that it can help extend the life of your power steering pump. This is because the pulley puller helps reduce the amount of wear and tear on the pump, which can ultimately lead to a longer lifespan for your pump.
How does a pulley puller for power steering pumps work?
A pulley puller is a device that is used to remove a pulley from a power steering pump. It works by attaching to the pulley and then pulling it off of the shaft.
What are the best brands of pulley pullers for power steering pumps?
There are a few different brands of pulley pullers that work well for power steering pumps, but some of the best include the Powerbuilt 648448 Kit and the Lisle 55900 Pulley Puller Set. These two brands offer a variety of sizes and styles to choose from, so you can find the right one for your specific needs.
Conclusion
This is the best pulley puller for power steering pump in the market today. It is made of high quality materials and it is very easy to use. It comes with a warranty of one year.