Why Mercury Lower Unit Drain Plug Gasket Is Necessary?
Best mercury lower unit drain plug gasket is necessary to seal the bottom of the boat’s hull where the waterline meets. It also helps to prevent leaking and moistening of boat parts.
Our Top Picks For Best Mercury Lower Unit Drain Plug Gasket
Best Mercury Lower Unit Drain Plug Gasket Guidance
Lower Drain Plugs, Lower Unit Oil Drain Plug Gearcase Screw & Gasket for Mercury40 50 70 75 115HP/Mercruiser Bravo/Alpha1Gen2, Replaces 10-79953Q2 10-79953A2 18-2244 22420 10-79953Q04
Lower Drain Plugs, Lower Unit Oil Drain Plug Gearcase Screw & Gasket for Mercury40 50 70 75 115HP/Mercruiser Bravo/Alpha1Gen2, Replaces 10-79953Q2 10-79953A2 18-2244 22420 10-79953Q04
This is the non-magnetic plug screw version Helps prevent gear lube from leaking out and water from seeping in to the gear case causing serious damage.
Compatible with Mercury Marine 10-20259 10-79953Q04 10-79953Q2 10-79953A2 10-79953 10-28634 10-28634A1 and for Mercruiser Stern Drive 816610A2 816610A1 10-28634A1 10-28634 10-79953 10-79953A2 10-79953Q2 10-79953Q04.
Common Questions on Lower Drain Plugs, Lower Unit Oil Drain Plug Gearcase Screw & Gasket for Mercury40 50 70 75 115HP/Mercruiser Bravo/Alpha1Gen2, Replaces 10-79953Q2 10-79953A2 18-2244 22420 10-79953Q04
• Where is the lower drain plug located on a Mercury40 50 70 75 115HP/Mercruiser Bravo/Alpha1Gen2?The lower drain plug is located on the side of the engine, near the bottom.
• How do you remove the lower drain plug?
To remove the lower drain plug, first unscrew the plug itself, and then use a wrench to loosen the nut that holds it in place. Once the nut is loose, the drain plug can be removed by hand.
• What is the purpose of the lower drain plug?
The lower drain plug serves two purposes: first, it allows oil to drain out of the engine, and second, it keeps dirt and debris from entering the engine.
• How often should the lower drain plug be replaced?
The lower drain plug should be replaced every time the engine oil is changed.
Why We Like This
• 1. Screw and seal prevents gear lube from leaking and water from seeping in• 2. Used with 3/8 16 drain/fill hole screw on all MerCruiser stern drives• 3. Mercury and Mariner outboards• 4. Non magnetic plug screw version• 5. Compatible with Mercury Marine and Mercruiser Stern Drive
Marine Magnetic Outdrive Gear Case Drain Plug, Screw with Gasket Replace 22-8M0058389, Lower Unit Gear Lube Drain Fill Hole Screw and Seal for Mercruiser Mercury
If you need to replace the drain plug (magnet) on your Mercury or Mercruiser outboard, this is the perfect replacement! It fits perfectly and seals the lower unit just fine. The magnet is strong and will do a great job of collecting metal shavings.
Common Questions on Marine Magnetic Outdrive Gear Case Drain Plug, Screw with Gasket Replace 22-8M0058389, Lower Unit Gear Lube Drain Fill Hole Screw and Seal for Mercruiser Mercury
• 1-What is the model of the gear case drain plug screw with gasket?The model is 22-8M0058389.
•2- Is the gear case drain plug screw with gasket easy to replace?
Yes, the gear case drain plug screw is easy to replace.
•3- What size is the gear case drain plug screw with gasket?
The gear case drain plug screw is 3/8 inches in diameter.
•4- What is the thread size of the gear case drain plug screw with gasket?
The thread size of the gear case drain plug screw is 10-32.
•5- What is the length of the gear case drain plug screw with gasket?
The length of the gear case drain plug screw is 1-1/4 inches.
Why We Like This
• 1. Fits Mercury and Mercruiser outboards perfectly• 2. Seals lower unit to keep gear lube in and water out• 3. Magnet is strong and will collect metal shavings• 4. Interchangeable with other drain plugs• 5. Function, form, and fit are perfect
Lower Unit Grease Gaskets, Gearcase Lube Drain Screw Washer 26-830749, Gearcase Drain Plug Seal for Mercury 115FS 150 EFI Four Stroke and Mariner Outboards and MerCruiser Stern Drives
When changing the lower unit grease or gearcase lube on your Mercury 115FS 150 EFI Four Stroke or Mariner outboard, use this replacement gasket for the drain plug. This rubber-coated steel washer fits all 3/8-16 gearcase drain/fill screw holes and is essential to preventing water from infiltrating your gearcase and causing catastrophic damage. Always keep a spare on hand to ensure proper installation after changing your gear oil.
Common Questions on Lower Unit Grease Gaskets, Gearcase Lube Drain Screw Washer 26-830749, Gearcase Drain Plug Seal for Mercury 115FS 150 EFI Four Stroke and Mariner Outboards and MerCruiser Stern Drives
• What is a Lower Unit Grease Gasket?A lower unit grease gasket is a gasket that is located between the lower unit and the gearcase on a Mercury outboard or MerCruiser stern drive.
• What is the function of the Gearcase Lube Drain Screw Washer?
The Gearcase Lube Drain Screw Washer is responsible for sealing the gearcase lube drain screw.
• What is the function of the Gearcase Drain Plug Seal?
The Gearcase Drain Plug Seal is responsible for sealing the gearcase drain plug.
Why We Like This
• 1. Fits Mercury and Mariner outboards and all MerCruiser stern drives with 3/8 16 gearcase drain/fill screw holes• 2. Rubber coated stainless steel• 3. Prevents gear oil leaking• 4. Catastrophic damage to the gearcase• 5. One time use
12 Pcs Drain Screw Gasket Marine Lower Unit Drain Plug Seal Compatible with Mercury Marine 12-19183-3/12-191833, 12-19183Q02 12-19183K02 18-2244
If you’re looking for a way to keep your oil in and water out, these 12 Pcs Drain Screw Gaskets are just what you need. Made of high-quality material with asbestos free, they provide good tightness and solve leaking problems. And they’re compatible with 18-2945 Sierra Marine, 98-102-09 SEI Marine, 9-60101, 9-60102 Mallory Marine, 31170 GLM, MR-103 OBR Red Rhino, 12-19183 12-191832 Mercury Marine. So when you’re reinstalling the oil drain screw, be sure to double-check that the gasket is seated properly. Otherwise, water could seep into the transmission and cause damage.
Common Questions on 12 Pcs Drain Screw Gasket Marine Lower Unit Drain Plug Seal Compatible with Mercury Marine 12-19183-3/12-191833, 12-19183Q02 12-19183K02 18-2244
• What are the dimensions of the 12 Pcs Drain Screw Gasket Marine Lower Unit Drain Plug Seal Compatible with Mercury Marine 12-19183-3/12-191833, 12-19183Q02 12-19183K02 18-2244?The dimensions of the 12 Pcs Drain Screw Gasket Marine Lower Unit Drain Plug Seal Compatible with Mercury Marine 12-19183-3/12-191833, 12-19183Q02 12-19183K02 18-2244 are 3 x 3 x 0.5 inches.
• What is the weight of the 12 Pcs Drain Screw Gasket Marine Lower Unit Drain Plug Seal Compatible with Mercury Marine 12-19183-3/12-191833, 12-19183Q02 12-19183K02 18-2244?
The weight of the 12 Pcs Drain Screw Gasket Marine Lower Unit Drain Plug Seal Compatible with Mercury Marine 12-19183-3/12-191833, 12-19183Q02 12-19183K02 18-2244 is 0.16 ounces.
• What is the part number for the 12 Pcs Drain Screw Gasket Marine Lower
Why We Like This
• 12 Pcs Aftermarket Seal Gasket• Made of High quality Material with Asbestos Free• Provide Good Tightness, and Solve Leaking problems• Compatible with 18 2945 Sierra Marine; 98 102 09 SEI Marine; 9 60101; 9 60102 Mallory Marine; 31170 GLM; MR 103 OBR Red Rhino; 12 19183 12 191832 Mercury Marine;• Used With The 3/8 16 Drain/Fill Screw Found On All Mercruiser And Most Mercury/Mariner Outboards
Handi Man Marine Co 02802 Plug Gasket-Mercury Lower Unit
If you’re looking for a replacement gasket for your Mercury lower unit, look no further than the Handi Man Marine Co 02802 Plug Gasket. This gasket is made from durable materials and is designed to provide a tight seal, keeping water and other contaminants out of your lower unit. The Handi Man Marine Co 02802 Plug Gasket is a great way to keep your lower unit in top condition and ensure that it lasts for years to come.
Common Questions on Handi Man Marine Co 02802 Plug Gasket-Mercury Lower Unit
• What is the diameter of the Handi Man Marine Co 02802 Plug Gasket-Mercury Lower Unit?The diameter of the Handi Man Marine Co 02802 Plug Gasket-Mercury Lower Unit is 3-1/8″.
• What is the length of the Handi Man Marine Co 02802 Plug Gasket-Mercury Lower Unit?
The length of the Handi Man Marine Co 02802 Plug Gasket-Mercury Lower Unit is 4-3/8″.
• What is the width of the Handi Man Marine Co 02802 Plug Gasket-Mercury Lower Unit?
The width of the Handi Man Marine Co 02802 Plug Gasket-Mercury Lower Unit is 1-1/4″.
Why We Like This
• 1. Handi Man Marine Co 02802 Plug Gasket is made in the United States.• 2. The product dimensions are 127 L x 1016 H x 381 W (centimeters).• 3. The package weight is 0005 kilograms.• 4. The part number is 02802.• 5. This product is a gasket for a Mercury lower unit.
Benefits of Mercury Lower Unit Drain Plug Gasket
Mercury lower unit drain plug gaskets are designed to provide a tight seal between the drain plug and the lower unit. This prevents water and other contaminants from entering the lower unit, which can cause significant damage. Drain plugs are subject to a great deal of stress and wear, so it is important to regularly inspect them for signs of wear or damage.Replacing a worn or damaged gasket is relatively simple and inexpensive, so it is well worth doing in order to protect your investment.
Buying Guide for Best Mercury Lower Unit Drain Plug Gasket
If you are shopping for a mercury lower unit drain plug gasket, here are some things to keep in mind to ensure you are getting the best product for your money.
-First, check the size and compatibility of the gasket with your outboard model.
-Second, take a look at the material. Some gaskets are made of paper or rubber while others are made of metal. Depending on what you plan on using your outboard for, one type may be better suited for you than another.
-Third, consider the price. Gaskets can range in price from a few dollars to over $100. Decide how much you are willing to spend on a gasket before beginning your search.
Frequently Asked Question
What is the best mercury lower unit drain plug gasket?
Some boat owners and mechanics may recommend using a neoprene gasket with a stainless steel washer for extra durability.
What are the features of the best mercury lower unit drain plug gasket?
Some features to look for when shopping for a mercury lower unit drain plug gasket include a good seal to prevent leaks, durability, and a good fit. You may also want to consider a gasket that is easy to install and remove.
What are the benefits of using the best mercury lower unit drain plug gasket?
There are many benefits of using the best mercury lower unit drain plug gasket. Some of these benefits include: 1. It helps to prevent leaks. 2. It keeps the oil clean and free of debris. 3. It helps to prolong the life of the engine. 4. It allows for easy and quick oil changes. 5. It is less likely to cause damage to the engine.
How easy is the best mercury lower unit drain plug gasket to install?
The best mercury lower unit drain plug gasket is very easy to install.
How long does the best mercury lower unit drain plug gasket last?
The best mercury lower unit drain plug gasket will last for several years.
Conclusion
Thank you for your time. I hope I have convinced you of the importance of having a good quality mercury lower unit drain plug gasket. This is an essential piece of equipment for anyone who owns a boat and wants to keep it in good working condition. Mercury makes some of the best quality products on the market and this gasket is no exception. It is durable and will last for years with proper care. I believe that it is a wise investment to purchase this gasket and I think you will be happy with the results.