Cleanouts are important because they help prevent clogs in the floor drain and sewer line. Over time, hair, soap scum, and other debris can build up in the floor drain trap and cause a clog. If a clog occurs, water will no longer be able to flow freely down the drain and may begin to backup into your home.
To clean out your floor drain, remove the cleanout plug using a wrench or pliers. Then, use a plunger to force any debris out of the drain. You may need to do this several times before the clog is removed. Once the clog is gone, replace the cleanout plug and restore water flow to the drain.
Why Floor Drain Cleanout Plug Is Necessary?
Drainage systems are important for keeping homes and businesses free from water damage. There are many different types of drainage systems, but one of the most common is the floor drain. Floor drains can be found in all types of buildings, including homes, office buildings, and even factories.
Floor drains are designed to catch water that drips down from the ceiling or spills onto the floor. They are usually located in areas where there is a lot of foot traffic, such as in front of sinks or near showers and bathtubs. Over time, however, floor drains can become clogged with hair, soap scum, grease, and other debris. When this happens, it can cause problems with your drainage system and lead to flooding inside your home or business.
One way to prevent these problems is to have a best floor drain cleanout plug installed in each of your floor drains. A cleanout plug is a small device that fits into the drain opening and prevents debris from entering the drainpipe. This way, if something does happen to get into the drainpipe and start to clog it up, you can simply remove the plug and allow the water to flow freely again. Cleanout plugs are relatively inexpensive and easy to install yourself; however, if you have never installed one before it is always best to hire a professional plumber for this job justto be onthe safe side.
Our Top Picks For Best Floor Drain Cleanout Plug
Best Floor Drain Cleanout Plug Guidance
DANCO PlugAll Mechanical Test, Seal & Cleanout Pipe Plug | For Drains & Clean-outs | Fits 1-1/2 inch and 2 inch pipes | DWV Testing (10839),Red
Mechanical test plugs are an essential tool for any homeowner or business owner. They allow you to test for leaks in your drain and clean-out pipes, and they can also be used to seal and clean pipes that are no longer in use. The DANCO PlugAll Mechanical Test, Seal & Cleanout Pipe Plug is an expandable test plug that fits 1-1/2 inch and 2 inch pipes. It is easy to install with no tools required, and it has an ergonomically designed handle that turns and expands the patented rubber gasket to provide an air and water tight seal.
Common Questions on DANCO PlugAll Mechanical Test, Seal & Cleanout Pipe Plug | For Drains & Clean-outs | Fits 1-1/2 inch and 2 inch pipes | DWV Testing (10839),Red
• What are the dimensions of the DANCO PlugAll Mechanical Test, Seal & Cleanout Pipe Plug?The DANCO PlugAll Mechanical Test, Seal & Cleanout Pipe Plug fits 1-1/2 inch and 2 inch pipes.
• What is the DANCO PlugAll Mechanical Test, Seal & Cleanout Pipe Plug used for?
The DANCO PlugAll Mechanical Test, Seal & Cleanout Pipe Plug is used for drains and clean-outs.
• How do you use the DANCO PlugAll Mechanical Test, Seal & Cleanout Pipe Plug?
To use the DANCO PlugAll Mechanical Test, Seal & Cleanout Pipe Plug, first identify the clean-out plug that corresponds to the size of your pipe. Next, apply a generous amount of pipe sealant around the edge of the clean-out plug. Finally, insert the plug into the clean-out fitting and hand-tighten until snug.
Why We Like This
• 1. Rubber gasket provides air and water tight seal• 2. Easy installation no tools required• 3. Fits 1 1/2 inch and 2 inch pipes• 4. Ergonomically designed handle• 5. Patented expandable design
Additional Product Information
| Color | Red |
| Height | 3.75 Inches |
| Length | 2.5 Inches |
Oatey 33403 Plastic Plug (with Galvanized screw and wing nut), 4-Inch
Oatey 33403 Plastic Plug (with Galvanized screw and wing nut), 4-Inch
This plastic plug is designed for use with various piping materials. It is made of durable plastic and can hold up to 5 PSIG of pressure. The galvanized screw and wing nut make it easy to install and remove.
Common Questions on Oatey 33403 Plastic Plug (with Galvanized screw and wing nut), 4-Inch
• What are the dimensions of the Oatey 33403 Plastic Plug?The Oatey 33403 Plastic Plug has a 4-inch diameter.
• What is the weight of the Oatey 33403 Plastic Plug?
The Oatey 33403 Plastic Plug weighs 0.3 ounces.
• What is the Oatey 33403 Plastic Plug made of?
The Oatey 33403 Plastic Plug is made of durable plastic.
• How much does the Oatey 33403 Plastic Plug cost?
The Oatey 33403 Plastic Plug retails for around $3.
Why We Like This
Can be used on most piping materials
Maximum allowed air pressure is 5 PSIG on plastic and 2 PSIG on galvanized
Premium plugs designed to hold higher pressures
Simple to use and install
Effectively seals pipes
Additional Product Information
| Color | Red |
| Height | 4 Inches |
| Length | 4 Inches |
| Weight | 0.5 Pounds |
Test-Tite 83593 Twist-Tite ABS Mechanical Test Plug, For 3-Inch NPS (End-of-Pipe Use Only)
The Test-Tite 83593 Twist-Tite ABS Mechanical Test Plug is a reliable and easy-to-use way to test or temporarily block DWV (drain, waste, and vent) piping. The oversized wing nut and wrench pad make installation and removal quick and easy, while the neoprene gasket creates an airtight seal around the outside of the pipe. The corrosion-resistant construction (ABS plates, steel-plated screw, and zinc nut) ensures long-lasting performance.
Common Questions on Test-Tite 83593 Twist-Tite ABS Mechanical Test Plug, For 3-Inch NPS (End-of-Pipe Use Only)
• What is the Test-Tite 83593 Twist-Tite ABS Mechanical Test Plug?The Test-Tite 83593 Twist-Tite ABS Mechanical Test Plug is a device used to test the tightness of pipes.
• What is the maximum operating pressure for the Test-Tite 83593 Twist-Tite ABS Mechanical Test Plug?
The maximum operating pressure for the Test-Tite 83593 Twist-Tite ABS Mechanical Test Plug is 150 psi.
• What is the maximum backpressure for the Test-Tite 83593 Twist-Tite ABS Mechanical Test Plug?
The maximum backpressure for the Test-Tite 83593 Twist-Tite ABS Mechanical Test Plug is 10 psi.
• What is the maximum temperature for the Test-Tite 83593 Twist-Tite ABS Mechanical Test Plug?
The maximum temperature for the Test-Tite 83593 Twist-Tite ABS Mechanical Test Plug is 140°F (60°C).
• What is the minimum temperature for the Test-Tite 83593 Twist-Tite ABS Mechanical Test Plug?
The minimum temperature for the
Why We Like This
• 1. ABS mechanical test plug for use with standard sized DWV (drain, waste, and vent) piping.• 2. Designed to test or temporarily block pipelines (for end of pipe use only).• 3. Oversized wing nut and wrench pad make installation and removal easy and intuitive.• 4. Neoprene gasket creates an airtight seal around the outside of the pipe.• 5. Corrosion resistant construction (ABS plates, steel plated screw, and zinc nut).
Additional Product Information
| Color | Red |
| Height | 2 Inches |
| Length | 3 Inches |
| Weight | 0.4 Pounds |
Cherne 270138 Gripper 3-1/2 in. Black Mechanical Clean Out Plug
If your home has an older plumbing system, it’s important to have a reliable clean out plug on hand. The Cherne 270138 Gripper 3-1/2 in. Black Mechanical Clean Out Plug is designed to work with cast-iron pipe and features a patented threaded O-ring for a guaranteed airtight seal. The tough ABS plastic construction is reinforced with glass for added strength, and the stainless steel hardware prevents corrosion.
Common Questions on Cherne 270138 Gripper 3-1/2 in. Black Mechanical Clean Out Plug
• What is the maximum rating for the Cherne 270138 Gripper 3-1/2 in. Black Mechanical Clean Out Plug?This product is rated for up to 100 PSI.
• What are the dimensions of the Cherne 270138 Gripper 3-1/2 in. Black Mechanical Clean Out Plug?
The Cherne 270138 Gripper 3-1/2 in. Black Mechanical Clean Out Plug has an outer diameter of 4.5 inches and an inner diameter of 3.69 inches.
• What is the weight of the Cherne 270138 Gripper 3-1/2 in. Black Mechanical Clean Out Plug?
This product weighs 0.31 pounds.
• What is the part number for the Cherne 270138 Gripper 3-1/2 in. Black Mechanical Clean Out Plug?
The part number for the Cherne 270138 Gripper 3-1/2 in. Black Mechanical Clean Out Plug is 270138.
• Where is the Cherne 270138 Gripper 3-1/2 in. Black Mechanical Clean Out Plug made?
This product is
Why We Like This
• 1. Seals any damaged threads• 2. Black color blends well with cast iron pipe• 3. ABS glass reinforced plastic for added strength• 4. Patented threaded O ring for an airtight seal• 5. Stainless steel hardware prevents corrosion
Additional Product Information
| Color | Black |
| Height | 5 Inches |
| Length | 3 Inches |
| Weight | 0.5 Pounds |
Sioux Chief 878-40PK Recessed Plug 4 in, Sold as 3 Pack
When it comes to plumbing, having a reliable and durable plug is important. The Sioux Chief 878-40PK Recessed Plug 4 in, Sold as 3 Pack is a great option for those looking for a reliable way to seal off a cleanout cover. This plug is made of PVC and features a threaded brass insert that makes it easy to install. It is also acid resistant and chemically inert, making it more durable than traditional plugs.
Common Questions on Sioux Chief 878-40PK Recessed Plug 4 in, Sold as 3 Pack
• What is the maximum height of this product?8 inches
• What is the diameter of the Recessed Plug?
4 inches
• What is the maximum weight capacity of the product?
15 pounds
• What is the minimum order quantity?
3 Pack
Why We Like This
• Can be used with a cleanout adapter fitting installed in a wye to provide access• Acid resistant and chemically inert• More durable than traditional plugs• Installed in a 4″ PVC white DWV cleanout to provide a flush fitting watertight access to the DWV piping system for cleaning or visual inspection• 4″ PVC polypropylene flush plug with threaded brass insert for easy cleanout cover installation
Additional Product Information
| Height | 4 Inches |
| Length | 0.8 Inches |
| Weight | 0.1 Pounds |
Benefits of Floor Drain Cleanout Plug
A floor drain is a necessity in any home as it helps to prevent flooding. A good floor drain cleanout plug will keep your drains clear and free of debris. It is important to choose the right size plug for your needs as a too small plug can get easily clogged. There are many benefits of using a floor drain cleanout plug including:
1. Preventing Flooding: A plugged floor drain can cause water to backup and flood your home. By using a cleanout plug, you can avoid this problem and keep your home dry.
2. Keeping Drains Clear: Debris can build up in your drains over time, causing them to become clogged. By using a cleanout plugs, you can ensure that your drains stay clear and free-flowing.
3′.
Buying Guide for Best Floor Drain Cleanout Plug
Looking for the best floor drain cleanout plug? Here are a few things to keep in mind to help you choose the right one for your needs.
Size: The first thing to consider is the size of the floor drain cleanout plug you need. Make sure to measure the size of the drain before you shop so you know what will fit.
Materials: Floor drain cleanout plugs are typically made from plastic or metal. Some are adjustable, so you can get a snug fit no matter what the size of your drain. Consider which material will work best for your needs.
Design: There are several different designs available, so take some time to browse and find one that you like. Some plugs have handles for easy removal, while others have a screw-on design. Choose whichever style you prefer.
Frequently Asked Question
What are the best floor drain cleanout plugs on the market?
There are a few different types of floor drain cleanout plugs on the market, but the best ones are typically made of rubber or silicone. These materials create a tight seal that will prevent water from seeping through and causing damage.
What are the features of a good floor drain cleanout plug?
A good floor drain cleanout plug should be made of durable material that will not corrode or degrade over time. It should fit snugly in the drain cleanout opening, and should be easy to remove when needed.
What are the benefits of using a floor drain cleanout plug?
The benefits of using a floor drain cleanout plug are that it can help prevent clogs in your drain and can make it easier to clean your drain.
How easy is it to install a floor drain cleanout plug?
Most floor drain cleanout plugs are easy to install. Some plugs come with a gasket and screws, while others simply press into place.
How does a floor drain cleanout plug compare to other drain plugs?
A floor drain cleanout plug is a drain plug specifically designed for floor drains. Other types of drain plugs may not fit as snugly or may not seal as effectively, allowing water to seep through.
Conclusion
Thanks for considering our floor drain cleanout plug! We truly believe it is the best one on the market, and we stand behind our product. If you have any questions or concerns, please don’t hesitate to reach out to us.