A zero clearance insert is one of the most important accessories for a Craftsman table saw. It helps prevent tear-out, provides support for thin stock, and gives you a clean, accurate cut. There are a few different ways to make your own zero clearance insert, but the following method is the simplest and most effective.
Why Zero Clearance Table Saw Insert Craftsman Is Necessary?
A table saw is one of the most versatile and useful tools in a woodworker’s arsenal, but it can also be one of the most dangerous. A table saw can quickly and easily rip large pieces of wood into small, manageable pieces, but if the blade isn’t level with the table or is tilted at an angle, it can bind and kickback with deadly force.
A zero clearance insert is a thin piece of metal or plastic that fits snugly around the blade of your table saw. It essentially turns your table saw into a much safer tool by creating a barrier between the blade and anything else that could potentially be drawn into it. binding or catching on the blade.
If you’re going to be doing any serious woodworking with your table saw, then a zero clearance insert is an absolute necessity. It’s cheap insurance against catastrophe, and it could very well save your life someday.
Our Top Picks For Best Zero Clearance Table Saw Insert Craftsman
Best Zero Clearance Table Saw Insert Craftsman Guidance
Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8” x 3-3/4” x 1/2” Throat Plate Opening
A zero clearance insert is a specific type of insert that is designed to fit snugly into a table saw throat plate opening. These inserts are typically made out of high density phenolic material, and they help to prevent wood tear-out and small pieces of wood from getting caught in the saw blade. In addition, zero clearance inserts can be used with most any type of table saw blade, including thin kerf, standard kerf, and carbide tipped blades.
Common Questions on Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8” x 3-3/4” x 1/2” Throat Plate Opening
• How do I install the Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8” x 3-3/4” x 1/2” Throat Plate Opening?Simply align the insert with the throat plate opening and press it into place. For a more secure fit, you can use a few drops of glue or adhesive.
• How do I clean the Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8” x 3-3/4” x 1/2” Throat Plate Opening?
You can clean the insert with a damp cloth. Be sure to dry it completely before reinstalling.
• Can I use the Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8” x 3-3/4” x 1/2” Throat Plate Opening on other table saws?
This insert is specifically designed for the Delta Uni-S
Why We Like This
• 1) Helps to prevent small pieces of wood from getting caught in the saw blade and flying across the room• 2) 3) Reduces tear out on cuts• 4) 5) Made from high density phenolic material for durability
Newer Craftsman/Rigid Table Saw Zero Clearance Insert (After 1988) by Peachtree Woodworking PW953 Approx Dims: 14 in x 3-3/4 in x 3/16 in
Assuming you are referring to the blog titled, “Newer Craftsman/Rigid Table Saw Zero Clearance Insert (After 1988) by Peachtree Woodworking PW953″, here is a detailed, professional, witty, and clever explanation of the insert.
The PW953 insert is designed for use with most 10″ belt drive models manufactured after 1988, including the Ridgid TS-2412, TS-2424, and TS-2400. The insert is blank, so you can custom fit the blade slot by passing your blade through it. This helps to prevent tear-out and close the large factory gap. The insert measures 14″ x 3 3/4″ x 3/16”.
Common Questions on Newer Craftsman/Rigid Table Saw Zero Clearance Insert (After 1988) by Peachtree Woodworking PW953 Approx Dims: 14 in x 3-3/4 in x 3/16 in
• What is the dimensions of the insert?The insert is approximately 14 inches by 3-3/4 inches by 3/16 inches.
• How do you install the insert?
You simply need to repeat the process five times in order to install the insert properly.
• What are the benefits of using this insert?
There are several benefits to using this insert including creating a zero clearance surface on your table saw and preventing tear out.
• How often do you need to replace the insert?
The insert should be replaced as needed, depending on how often you use your table saw.
Why We Like This
• The insert is blank so you can custom fit the blade slot by passing your blade through it.• Helps to prevent tear out plus close the large factory gap.• Fits most (1988 and newer) 10″ Belt Drive Models, Ridgid TS 2412, TS 2424 & TS 2400.• 14″ x 3 3/4″ x 3/16″.• Made in the USA
Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw (Colors may Vary)
When it comes to a top-quality table saw insert, the Leecraft DL-1U Zero Clearance Table Saw Insert is one of the best on the market. It’s designed to fit a variety of different table saws, including the Delta Unisaw, 10″ Contractor, 10″ Tilt Arbor Saw, and the Hybrid & Left-Tilt Contractor. The Grizzly G1023, Jet CTAS-10, Powermatic 63, and Sears Craftsman 22104, 22114, and 22124 are also compatible with this insert.
This insert offers superior rigidity, flatness, durability, and low friction. It eliminates the dangerous gap around the blade where thin off-cuts can get wedged. The Leecraft DL-1U also includes leveling screws, side and end adjustment screws, and a rear safety pin. Plus, the precut blade bottom pocket allows for fully retracted blades and bevel cuts.
Common Questions on Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw (Colors may Vary)
• What is the Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw?The Leecraft DL-1U Zero Clearance Table Saw Insert is a table saw insert that is used to create a zero clearance table saw. It is available in various colors.
• What are the dimensions of the Leecraft DL-1U Zero Clearance Table Saw Insert?
The Leecraft DL-1U Zero Clearance Table Saw Insert is 9-3/4 inches in diameter and 1-3/16 inches thick.
• How do I install the Leecraft DL-1U Zero Clearance Table Saw Insert?
Installation instructions are included with the insert. Generally, the insert is installed by aligning it with the blade, then attaching it to the table saw with screws.
• What are the benefits of using a zero clearance table saw insert?
Zero clearance table saw inserts provide several benefits. They help to prevent kickback, they help to reduce tear out, and they also help to create a more accurate cut.
• Are there any precautions that need to be taken when using a zero clearance table saw
Why We Like This
• Fits Delta Unisaw & LEFT TILT UNISAW, 10″ Contractor, 10″ Tilt Arbor Saw, “Hybrid” & Left Tilt Contractor, Grizzly G1023, Jet CTAS 10, Powermatic 63, Sears Craftsman 22104, 22114, 22124, Bridgewood BW10TS, Steel City 35605, 35610, 35670, 35675, 35680, 35685• Measures: 13 3/8″ x 3 3/4″ x 1/2″• Offers superior rigidity, flatness, durability, and low friction; reduces chip out and splintering• Eliminates dangerous gap around blade where thin off cuts can get wedged• Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
Additional Product Information
| Height | 3 Inches |
| Length | 8 Inches |
Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert
If you’re a woodworker, then you know that one of the most important parts of your table saw is the insert. And if you’re looking for a top quality insert, then you should definitely check out the Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert.
This insert is made from high-density phenolic laminate with a bonded-melamine surface, and it includes side and end adjustment screws and a pre-cut blade bottom pocket. It’s also 14 3/8″ X 3 3/4″ X 3/32″ thick, so it’s the perfect size for most table saws.
One of the best things about this insert is that it’s blank, so you can custom fit the blade slot by passing your blade through it. This is a great feature if you’re looking to prevent tear out.
So if you’re in the market for a top quality table saw insert, then you should definitely check out the Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert.
Common Questions on Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert
• What is Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert?The Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert is a table saw accessory that is used to provide a zero clearance surface for cutting operations.
• What are the dimensions of the Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert?
The dimensions of the Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert are 9-1/2″ x 9-1/2″.
• How is the Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert installed?
The Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert is installed by first removing the existing insert from the table saw. The new insert is then placed into the table saw so that the zero clearance surface is flush with the tabletop. The insert is then secured in place with the provided screws.
Why We Like This
• Custom fit the blade slot by passing your blade through it• Made from high density phenolic laminate with a bonded melamine surface• Includes side and end adjustment screws; pre cut blade bottom pocket• 14 3/8″ X 3 3/4″ X 3/32″ thick• CHECK the Length, Width and Thickness of your insert before ordering
Additional Product Information
| Weight | 1 Pounds |
NEW SEARS CRAFTSMAN HYBRID TABLE SAW ZERO CLEARANCE INSERT by Peachtree Woodworking PW 946 Approx Dims 13-11/32 in x 3-3/4 in x 1/2 in
If you’re a woodworker, then you know that one of the most important pieces of equipment in your shop is the table saw. And if you have a table saw, then you know that one of the most important accessories for your table saw is the zero clearance insert.
The zero clearance insert is a piece of plastic or metal that is placed in the table saw’s throat plate. It’s purpose is to create a tight, close fit between the blade and the throat plate, which helps to prevent tear-out.
If you’re looking for a zero clearance insert that is custom fit to your table saw, then take a look at the Peachtree Woodworking PW 946. This zero clearance insert is made of UHMW, and is 13-11/32″ x 3-3/4″. It’s easy to install, and will help you get the most out of your table saw.
Common Questions on NEW SEARS CRAFTSMAN HYBRID TABLE SAW ZERO CLEARANCE INSERT by Peachtree Woodworking PW 946 Approx Dims 13-11/32 in x 3-3/4 in x 1/2 in
• Is this insert easy to install?Yes, this insert is easy to install. It comes with all the necessary hardware and instructions.
• Can this insert be used with any table saw?
This insert is designed for use with the Craftsman 10-inch hybrid table saw. It will not work with other table saws.
• What is the purpose of this insert?
This insert is used to create a zero clearance opening on your table saw. This helps to prevent kickback and protects your saw blade.
• How do I clean this insert?
You can clean this insert with a damp cloth. Do not use any harsh chemicals or cleaners.
Why We Like This
• 1. Helps to prevent tear out• 2. Custom fit the blade slot• 3. Close the large factory gap• 4. Models 22104 22114 22124• 5. Made of UHMW
Benefits of Zero Clearance Table Saw Insert Craftsman
It is no secret that a good table saw is one of the most versatile and important tools in a woodworker’s shop. And when it comes to versatility, few things can match a zero clearance insert.
A zero clearance insert is simply a piece of thin material (usually plywood or hardboard) that fits snugly into the throat plate opening of your table saw. This creates an extremely tight fit, which helps to prevent tear-out on both the top and bottom surfaces of your workpiece. In addition, because the insert completely covers the blade opening, it also effectively eliminates any chance for kickback . . . something that could be potentially dangerous.
There are many other benefits to using a zero clearance insert as well. For instance, because there is no longer an exposed blade slot, you can safely make cuts all the way up to within just 1/8″ of your workpiece’s end grain without worry about damage to either yourself or your tooling.
Buying Guide for Best Zero Clearance Table Saw Insert Craftsman
If you’re looking for a powerful and versatile table saw, the Craftsman Zero Clearance Table Saw Insert is a great option. With its powerful motor and large cutting surface, it’s perfect for a variety of projects. And its easy-to-use controls make it simple to get the perfect cut every time.
Frequently Asked Question
What is the best zero clearance table saw insert for a Craftsman table saw?
Some popular options for zero clearance inserts for Craftsman table saws include the Delta T2, the Grizzly G0444Z, and the Porter Cable 4216.
How do I make a zero clearance table saw insert for my Craftsman table saw?
You’ll need to make a few cuts to a piece of plywood or MDF to create a custom insert that will fit snugly into your Craftsman table saw. First, cut a rectangle that’s slightly larger than the opening on your table saw. Next, make a series of evenly-spaced cuts across the rectangle, making sure not to cut all the way through. Finally, use a router or jigsaw to cut out the center of the rectangle, leaving a lip around the edge. Your new insert is now ready to use!
What are the dimensions of a standard zero clearance table saw insert for a Craftsman table saw?
I could not find the dimensions for a standard zero clearance insert for a Craftsman table saw.
Is it necessary to use a zero clearance insert with a Craftsman table saw?
No, it is not necessary to use a zero clearance insert with a Craftsman table saw.
What are the benefits of using a zero clearance insert with a Craftsman table saw?
A zero clearance insert helps to prevent tear-out on the bottom side of the workpiece. It also helps to reduce the amount of sawdust that is produced when making a cut.
Conclusion
Dear __________,
Thank you for giving me the opportunity to share with you the benefits of the best zero clearance table saw insert craftsman. This product is truly a game changer when it comes to woodworking and I believe that it will be a valuable addition to your workshop.
The best zero clearance table saw insert craftsman is an innovative product that allows for precise cuts while also providing a safe and efficient working environment. In addition, the Best Zero Clearance Table Saw Insert Craftsman is easy to use and extremely user-friendly. I believe that this product would be an excellent addition to your workshop and would greatly enhance your woodworking experience.