HSIs are generally more reliable than pilot lights because they don’t rely on a flame to ignite the fuel. However, HSIs can be damaged by power surges, so it’s important to have them installed by a qualified technician.
If you’re having trouble with your furnace or boiler, one of the first things you should check is the HSI. If it’s damaged or not working properly, it could be the cause of your problem.
Why Universal Hot Surface Ignitor Is Necessary?
A hot surface ignitor is a device that is used to ignite gas burners. The ignitor consists of a heating element that is powered by electricity. When the element reaches a certain temperature, it produces a spark that ignites the gas.
Hot surface ignition systems are used in gas furnaces, water heaters, and other appliances that use natural gas or propane. They are considered to be safer and more reliable than older pilot light ignition systems because they do not require an open flame.
Our Top Picks For Best Universal Hot Surface Ignitor
Best Universal Hot Surface Ignitor Guidance
MCAMPAS Universal Silicon Nitride Hot Rod Ignitor.120 Volt Nitride Igniter Replacement For Silicon Carbide Igniters of The Gas-Fired Forced-Air Furnaces, Water Heaters, Boilers.
This is a very versatile product, very robust with long cycle life Nitride heating element. Power rating:150 W Temperature at 120v ± 05v 60HZ at 17 sec ≧1180 ℃ This is a silicon nitride igniter, which is a replacement for the silicon carbide igniters in gas-fired forced-air furnaces, water heaters, and boilers. It has a 120-volt power rating and a temperature of 1180 degrees Celsius. The silicon nitride igniter is used in many applications where a durable and long-lasting igniter is required.
Common Questions on MCAMPAS Universal Silicon Nitride Hot Rod Ignitor.120 Volt Nitride Igniter Replacement For Silicon Carbide Igniters of The Gas-Fired Forced-Air Furnaces, Water Heaters, Boilers.
• What is the MCAMPAS Universal Silicon Nitride Hot Rod Ignitor?The MCAMPAS Universal Silicon Nitride Hot Rod Ignitor is a 120 volt nitride igniter replacement for silicon carbide igniters of the gas-fired forced-air furnaces, water heaters, boilers.
• How does the MCAMPAS Universal Silicon Nitride Hot Rod Ignitor work?
The MCAMPAS Universal Silicon Nitride Hot Rod Ignitor uses a silicon nitride rod to create a hot spot for igniting the gas-fired forced-air furnaces, water heaters, boilers.
• What are the benefits of using the MCAMPAS Universal Silicon Nitride Hot Rod Ignitor?
The benefits of using the MCAMPASUniversal Silicon Nitride Hot Rod Ignitor include improved ignitability, better efficiency, and longer life.
Why We Like This
• 1. 120 volt nitride furnace igniter• 2. Replaces hot surface ignitor for gas fired furnace, boiler, and water heater• 3. 197″ Nitride heating element• 4. 118″Ceramic insulator body nonglazed 95% alumina polished finish• 5. 15 3/4 inch temperature rating 250℃
Hot Surface Ignitor, Silicon Carbide
A Hot Surface Ignitor (HSI) is a device that is used to ignite fuel in a appliance such as a furnace or stove. The igniter is usually made of silicon carbide, which is a very hard and durable material that can withstand high temperatures. The HSI is placed in contact with the fuel, and when it is turned on, it heats up to a temperature that is hot enough to ignite the fuel.
There are many advantages to using an HSI over other methods of ignition. For one, they are much more efficient than other types of igniters. They also have a much higher ignition temperature, which means that they can be used with a wider variety of fuels. Additionally, they are much less likely to cause a fire if there is a spill or leak, since the igniter will not continue to heat up the fuel once it has been turned off.
HSIs are also very easy to use. All that you need to do is turn on the power and the igniter will do the rest. There is no need to preheat the igniter or anything like that. Just make sure that the area around the HSI is clear of any flammable materials, and you should be good to go.
Common Questions on Hot Surface Ignitor, Silicon Carbide
• What is a Hot Surface Ignitor?A hot surface ignitor is a device that is used to ignite fuel in a gas furnace.
• How does a Hot Surface Ignitor work?
A hot surface ignitor consists of a silicon carbide element that is heated to a high temperature. When the silicon carbide element comes in contact with fuel, it ignites the fuel.
• What are the benefits of using a Hot Surface Ignitor?
Hot surface ignitors are more reliable than pilot lights and they ignites fuel more quickly.
• What are some of the disadvantages of using a Hot Surface Ignitor?
Hot surface ignitors can be more expensive than pilot lights and they require electricity to operate.
• How often should a Hot Surface Ignitor be replaced?
Hot surface ignitors typically last for several years. However, they may need to be replaced sooner if they are used frequently or if they are exposed to high temperatures.
Why We Like This
• 1) The Hot Surface Ignitor is a universal kit that replaces Robertshaw igniters 41 411, 41 410, 41 408, and 41 402.• 2) The Supco flat igniters offer an efficient, stronger, and reliable hot surface Silicon Carbide design.• 3) The Hot Surface Ignitor has a lower power consumption.• 4) The Superior gas lighting ability.• 5) The Hot Surface Ignitor is easy to install.
Additional Product Information
| Color | Multicolor |
| Height | 3 Inches |
| Length | 6 Inches |
| Weight | 0.3 Pounds |
Emerson 21D64-5PK Hot Rod Universal Surface Ignitor, 5-Pack
The Emerson 21D64-5PK Hot Rod Universal Surface Ignitor is a replacement ignitor that is designed to fit over 150 OEM, White-Rodgers and competitive HIS models. The kit includes a universal breakaway bracket to make installation easy and eliminates the need for multiple brackets. The 21D64-5PK contains 5 21D64-2 single pack ignitor kits.
Common Questions on Emerson 21D64-5PK Hot Rod Universal Surface Ignitor, 5-Pack
• What is Emerson 21D64-5PK Hot Rod Universal Surface Ignitor?It is a part that helps to create a spark in order to light the gas in a stove or oven.
• What are the dimensions of Emerson 21D64-5PK Hot Rod Universal Surface Ignitor?
3-1/4″ x 1″
• How does Emerson 21D64-5PK Hot Rod Universal Surface Ignitor work?
When electricity flows through the igniter, it gets hot and creates a spark. The spark lights the gas in the stove or oven, and the flame ignites.
• How long does Emerson 21D64-5PK Hot Rod Universal Surface Ignitor last?
It is recommended to replace your igniter every 3-5 years.
• How much electricity does Emerson 21D64-5PK Hot Rod Universal Surface Ignitor use?
120 volts
Why We Like This
• 1. Replaces over 150 OEM, White Rodgers and competitive HIS ignitors• 2. For gas fired forced air furnaces, water heaters and boilers• 3. Includes universal breakaway bracket to make installation easy• 4. Eliminates the need for multiple brackets• 5. Contains 5 21D64 2 single pack ignitor kits
Additional Product Information
| Height | 0.5 Inches |
| Length | 15.5 Inches |
| Weight | 1.6 Pounds |
White Rodgers 21D64-2 Universal Silicon Nitride Hot Surface Igniter
A hot surface igniter (HSI) is a device used to ignite fuel in a furnace or other type of boiler. It is a crucial component in furnaces that use natural gas, propane, oil, or other flammable fuels.
HSIs consist of a metal wire or rod that is heated to a high temperature by an electric current. The wire is usually made of silicon carbide or another material that can withstand very high temperatures. When the wire is heated to a sufficiently high temperature, it will glow brightly.
This glow is then used to ignite the fuel in the furnace. The fuel is typically injected into the furnace through small holes in the burner head. The igniter will heat the fuel to a temperature where it will vaporize and then ignite.
The main advantage of using an HSI is that it can provide a very high temperature with a relatively low voltage. This makes them well suited for use in furnaces, where they can be used to ignite fuel quickly and efficiently.
There are a few different types of HSIs available on the market, but the most common is the silicon nitride igniter. This type of igniter is very durable and can last for many years with proper care and
Common Questions on White Rodgers 21D64-2 Universal Silicon Nitride Hot Surface Igniter
• What is the White Rodgers 21D64-2 Universal Silicon Nitride Hot Surface Igniter?The White Rodgers 21D64-2 Universal Silicon Nitride Hot Surface Igniter is a silicon nitride igniter used to provide reliable ignition on furnaces, boilers, and other gas-fired appliances.
• What are the dimensions of the White Rodgers 21D64-2 Universal Silicon Nitride Hot Surface Igniter?
The White Rodgers 21D64-2 Universal Silicon Nitride Hot Surface Igniter has the following dimensions: 3/4″ x 3/4″ x 3-3/4″.
• What is the voltage of the White Rodgers 21D64-2 Universal Silicon Nitride Hot Surface Igniter?
The White Rodgers 21D64-2 Universal Silicon Nitride Hot Surface Igniter has a voltage of 120 VAC.
• What is the amperage of the White Rodgers 21D64-2 Universal Silicon Nitride Hot Surface Igniter?
The White Rodgers 21D64-2 Universal Silicon Nitride Hot Surface Igniter has an amperage of 0.6 A.
• What is the warranty of the White Rodgers 21D64
Why We Like This
1. The White Rodgers 21D64 2 Universal Silicon Nitride Hot Surface Igniter is a nitride ignitor with 155″ leads.
2. It comes with one “universal” mounting bracket and screwmounting adapter bracket.
3. It also includes two ceramic wire nuts.
4. This product is brand name: White Rodgers.
5. This product is a universal silicon nitride hot surface igniter.
Additional Product Information
| Color | n/a |
| Height | 1.4 Inches |
| Length | 6.3 Inches |
| Weight | 0.7 Pounds |
Emerson H150 Universal Ignitor
The Emerson H150 UniversalIgnitor is a reliable and durable ignition device that is compatible with most gas-fired forced-air furnaces, water heaters and boilers. Featuring a universal mounting bracket, the H150 eliminates the need for multiple brackets, making installation quick and easy. Additionally, the H150 features a large ignition area for consistent ignition and enhanced durability.
Common Questions on Emerson H150 Universal Ignitor
• What is the ignitor used for?The Emerson H150 Universal Ignitor is used to provide a reliable spark igniter for gas-fired appliances.
• What are the dimensions of the ignitor?
The Emerson H150 Universal Ignitor has a length of 4.5 inches (114 millimeters) and a width of 1.375 inches (34.9 millimeters).
• What is the voltage rating of the ignitor?
The Emerson H150 Universal Ignitor has a voltage rating of 120 volts.
• What is the current rating of the ignitor?
The Emerson H150 Universal Ignitor has a current rating of 3.0 amps.
• What is the warranty period for the ignitor?
The Emerson H150 Universal Ignitor has a warranty period of one year.
Why We Like This
• 1. Replaces 150 common igniters, covering almost 90% of applications• 2. Features universal mounting bracket to eliminate the need for multiple brackets• 3. Features large ignition area for easy installation and consistent ignition• 4. Durable, nitride construction for most applications• 5. Affordable
Additional Product Information
| Height | 0.5 Inches |
| Length | 0.5 Inches |
| Weight | 0.28 Pounds |
Benefits of Universal Hot Surface Ignitor
A universal hot surface ignitor is an affordable and easy-to-install option for furnaces and boilers. This type of ignitor is designed to fit a wide range of models, making it a versatile choice for many homeowners.
One of the biggest benefits of choosing a universal hot surface ignitor is that it eliminates the need for a pilot light. This can save you money on your gas bill each month, as well as reduce the risk of fire in your home. In addition, Universal hot surface ignitors are much easier to install than traditional pilot lights, so you can enjoy peace of mind knowing that your furnace or boiler will be up and running in no time at all.
Buying Guide for Best Universal Hot Surface Ignitor
A universal hot surface ignitor is a type of ignition device that uses an electrically charged element to create a spark. The ignitor then uses that spark to ignite the fuel in the combustion chamber of your furnace or boiler.
When choosing a replacement hot surface ignitor, it is important to choose one that is compatible with your furnace or boiler. Many manufacturers offeruniversal hot surface ignitors that will fit most makes and models. However, it is always best to check with your furnace or boiler manufacturer to be sure you are getting the correct model for your unit.
In addition, you’ll want to consider the following factors when selecting a universal hot surface ignitor:
– The voltage rating – this should be the same as the voltage rating on your original Ignitor. If it is not, it could damage your unit.
– The amperage rating – this should also be the same as the amperage rating on your original Ignitor. A higher amperageIgnitor can damage your unit.
– The size – make sure the new Ignitor is the same size as the old one. A different sized Ignitor could also damage your unit.
With these tips in mind, you should be able to find a replacement universal hot surface igniter that will work well in your furnace or boiler!
Frequently Asked Question
1) What are the best universal hot surface ignitors on the market?
There are many different hot surface ignitors on the market, so it is hard to say which ones are the best. Some factors to consider when choosing a hot surface ignitor include the type of furnace or boiler it will be used with, the size of the unit, the voltage required, and the price.
2) What are the features of a good universal hot surface ignitor?
There are a few key features that are important in a good universal hot surface ignitor. First, it should have a good heat conductivity in order to transfer heat quickly and evenly to the ignitor element. Second, it should be durable and resistant to corrosion. Third, it should have a good electrical insulation to prevent shorts. Finally, it should be able to withstand high temperatures.
3) What are the considerations to keep in mind when choosing a universal hot surface ignitor?
There are a few things to consider when choosing a universal hot surface ignitor: -The ignitor should be compatible with the gas you are using (natural gas, propane, etc.) -The ignitor should be the correct voltage for your application -The ignitor should be durable and able to withstand high temperatures -The ignitor should have a long lifespan
4) How do universal hot surface ignitors work?
The universal hot surface ignitor is a silicon carbide element that is used to produce a spark to light the gas flame in a gas furnace. The ignitor is heated by electricity and glows red hot. When the gas valve is opened, gas flows over the hot ignitor and ignites.
5) What are the benefits of using a universal hot surface ignitor?
There are several benefits to using a universal hot surface ignitor: 1. They are less likely to fail than other types of ignitors. 2. They provide a more consistent ignition, which can save on fuel costs. 3. They are less likely to damage the heating element. 4. They are easier to replace than other types of ignitors.
Conclusion
Thank you for your time today. I know finding the right hot surface ignitor can be tough, but I really believe this is the best one on the market. It’s reliable, easy to use, and available at a great price.
I think it would be a great addition to your home, and I guarantee you won’t be disappointed. Thanks again for your time, and feel free to reach out if you have any other questions.