The most important factor to consider when selecting jack stands is their capacity, which is measured in pounds. The weight of your trailer tongue must be equal to or less than the capacity of the jack stands. Another important factor to consider is the height of the jack stands. You want to be sure that they are tall enough to support the tongue of your trailer without being too tall and making the trailer unstable.
Once you have selected the best jack stands for your travel trailer, it is important to learn how to properly use them. Always position the jack stands on level ground before attempting to raise or lower the trailer tongue. When raising or lowering the tongue, use caution and go slowly to avoid injuring yourself or damaging the trailer.
Why Travel Trailer Jack Stands Is Necessary?
In order to ensure the safety of your travel trailer, it is important to use jack stands. This will help prevent the trailer from tipping over while you are working on it.
Our Top Picks For Best Travel Trailer Jack Stands
Best Travel Trailer Jack Stands Guidance
Valterra A10-0900 Trailer Tongue Jack Stand – Red
Valterra makes a tongue jack stand that is red and supports the trailer tongue without sinking into the asphalt. This eliminates the need for bulky wood blocks and only weighs 2 pounds. It can hold up to 5,000 pounds. This product is not designed to be used with trailer jacks that have wheels or casters. The tongue jack stand measures 8-5/8″ in diameter and 8-3/8″ in height.
Common Questions on Valterra A10-0900 Trailer Tongue Jack Stand – Red
• What is the weight capacity of the Valterra A10-0900 Trailer Tongue Jack Stand?The Valterra A10-0900 Trailer Tongue Jack Stand has a weight capacity of 5,000 pounds.
• How much does the Valterra A10-0900 Trailer Tongue Jack Stand weigh?
The Valterra A10-0900 Trailer Tongue Jack Stand weighs 17 pounds.
• What is the height of the Valterra A10-0900 Trailer Tongue Jack Stand?
The Valterra A10-0900 Trailer Tongue Jack Stand has a height of 10 inches.
• What is the width of the Valterra A10-0900 Trailer Tongue Jack Stand?
The Valterra A10-0900 Trailer Tongue Jack Stand has a width of 9 inches.
• What is the length of the Valterra A10-0900 Trailer Tongue Jack Stand?
The Valterra A10-0900 Trailer Tongue Jack Stand has a length of 14 inches.
Why We Like This
• Eliminates the need to tote and store bulky wood blocks• Weighs only 2 lbs• Holds up to 5,000 lbs• Measures 8 5/8″ diameter x 8 3/8″ high• Not designed to be used with trailer jacks with wheels or casters
Additional Product Information
| Color | Red |
| Height | 1.39370078598 Inches |
| Length | 1.39370078598 Inches |
| Weight | 1.43 Pounds |
RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks for RV Trailer Camper, Single Support Up to 6000 Lbs, Adjustable from 11″ to 17″
If you’re looking for a way to stabilize and level your RV, trailer or camper, then RVGUARD’s RV Stack Jacks are a great solution. Made of durable cast aluminum, these jacks are anti-rust and corrosion resistant, and each can support up to 6000 lbs. With a square base design, they are easy to position under your RV, and the height is adjustable from 11″ to 17″. Plus, they come with a handy storage bag. When not in use, the jacks can be compactly nested together for easy storage.
Common Questions on RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks for RV Trailer Camper, Single Support Up to 6000 Lbs, Adjustable from 11″ to 17″
• What are the dimensions of the RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks?The dimensions of the RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks are 11″ x 17″.
• How much does the RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks weigh?
The RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks weigh 4.85 pounds.
• What is the maximum weight capacity of the RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks?
The maximum weight capacity of the RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks is 6000 pounds.
• How are the RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks adjustable?
The RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks are adjustable from 11″ to 17″.
• What is the purpose of the RVGUARD RV Stack Jacks
Why We Like This
• 4 Pack RV Stack Jacks with a colorful storage bag• Durable cast aluminum, anti rust & corrosion resistant• With square base design, each can support up to 6000lbs• The height of the RV stabilizing jack can extend from 11″ to 17″• Lightweight & Portable, easy to use and store
Additional Product Information
| Color | 4 Pack |
| Weight | 7.72 Pounds |
Camco RV Tongue Jack Stand | Distributes Your Trailer Weight Evenly | Compatible with 2-inch and 6-inch Diameter Tongue Jacks | Features a 3,500 lb. Weight Rating (44636)
If you’re looking for a tongue jack that can evenly distribute the weight of your trailer, the Camco RV Tongue Jack Stand is a great option. This stand is compatible with both 2-inch and 6-inch diameter tongue jacks, and also provides additional support for slide-out supports. It’s made of a durable polymer construction and has a weight rating of 3,500 lb. The small size of this stand makes it easy to store, and it’s also made in the USA.
Common Questions on Camco RV Tongue Jack Stand | Distributes Your Trailer Weight Evenly | Compatible with 2-inch and 6-inch Diameter Tongue Jacks | Features a 3,500 lb. Weight Rating (44636)
• What are some of the key features of the Camco RV Tongue Jack Stand?The Camco RV Tongue Jack Stand is designed to distribute your trailer’s weight evenly and is compatible with both 2-inch and 6-inch diameter tongue jacks. It has a weight rating of 3,500 lbs.
• How do I use the Camco RV Tongue Jack Stand?
Simply place the jack stand under your trailer’s tongue jack and adjust the height as needed.
• What are the dimensions of the Camco RV Tongue Jack Stand?
The dimensions of the jack stand are 9.5″ x 7.5″ x 6.5″.
• How much does the Camco RV Tongue Jack Stand weigh?
The jack stand weighs approximately 3 lbs.
Why We Like This
• Distributes weight evenly for stability and support• Compatible with 2 inch and 6 inch tongue jacks• Features a 3,500 lb weight rating• Small and easy to store• Durable polymer construction
Dock N Stow Trailer Jack Stand, Stabilizing Leveling Block Stores on Tongue Frame, Fits Most Jack Foot Plates, Wheel, RV Camper, Pop Up, Boat, Utility Travel Accessories, Secures with a Bungee, GEN 1
The Dock N Stow Trailer Jack Stand is the perfect way to keep your trailer level and steady. This leveling block stores on the tongue or frame of most trailers, and has a 5000 lb capacity for the foot or post, and a 2500 lb capacity for the wheel dock. The included dovetail spacers make it easy to install on either a 2, 25, or 3 inch tongue or frame, and the adjustable flat bungee and anti-slip silicone tape keep it securely in place. The Dock N Stow provides 6 inches of height, making it easier to trailer or de-trailer your vehicle. It is also stackable, so you can add another Dock N Stow on top for 12 inches of height. Made from high quality ABS plastic, the Dock N Stow is resistant to UV exposure, water, heat, mud, and most other environmental hazards.
Common Questions on Dock N Stow Trailer Jack Stand, Stabilizing Leveling Block Stores on Tongue Frame, Fits Most Jack Foot Plates, Wheel, RV Camper, Pop Up, Boat, Utility Travel Accessories, Secures with a Bungee, GEN 1
• How many Dock N Stow Trailer Jack Stands are needed to stabilize a trailer tongue?One Dock N Stow Trailer Jack Stand is needed per wheel to stabilize a trailer tongue.
• How is the Dock N Stow Trailer Jack Stand different from other leveling blocks?
The Dock N Stow Trailer Jack Stand has been specifically designed to fit most jack foot plates and wheel sizes. It also secures with a bungee, making it more versatile than other leveling blocks.
• What are the benefits of using the Dock N Stow Trailer Jack Stand?
The Dock N Stow Trailer Jack Stand helps to level and stabilize a trailer tongue, preventing it from rocking back and forth. This can help to make towing and parking your trailer more safe and convenient.
• Where can I purchase the Dock N Stow Trailer Jack Stand?
The Dock N Stow Trailer Jack Stand is available for purchase on our website and at select retailers.
• How do I use the Dock N Stow Trailer Jack Stand?
The Dock N Stow Trailer Jack Stand can be used by placing it under the tongue of your trailer and securing it with the included
Why We Like This
• Supports most any trailer tongue jack without damaging the trailer• Has a 5000 lb capacity for any foot or post, round or square• Sits directly on 2, 25 or 3 inch trailer tongue or frame with the included dovetail spacers• Secures to square or rectangle tube frames with an included adjustable flat bungee & anti slip silicone tape• Provides 6 inches of height saving you time trailering or de trailering
Additional Product Information
| Color | Green |
| Height | 6.25 Inches |
| Length | 7 Inches |
| Weight | 3.36 Pounds |
Camco Olympian Aluminum Jack Stands, Support up to 6,000 lbs, Pack of 4 ( 44560)
If you’re looking for a way to stabilize and level your RV, Camco’s Olympian Aluminum Jack Stands are a great option. These stands are made from durable cast aluminum, and each one can support up to 6,000 pounds. They’re easy to use – just position them under your RV and raise to the desired height. The set of four stack jacks extends from 11 inches to 17 inches.
Common Questions on Camco Olympian Aluminum Jack Stands, Support up to 6,000 lbs, Pack of 4 ( 44560)
• What are the dimensions of the Camco Olympian Aluminum Jack Stands?The dimensions of the Camco Olympian Aluminum Jack Stands are 3.5″ x 3.5″ x 12″.
• How much weight can the Camco Olympian Aluminum Jack Stands support?
The Camco Olympian Aluminum Jack Stands can support up to 6,000 lbs.
• How many Camco Olympian Aluminum Jack Stands are included in a pack?
A pack of Camco Olympian Aluminum Jack Stands includes 4 jack stands.
Why We Like This
• RV Jack Stands stabilize and level your RV• Durable cast aluminum construction• Each jack stand can support up to 6,000 lbs• Extends from 11 inches to 17 inches• Set of four stack jacks
Additional Product Information
| Color | Aluminum |
| Height | 11 Inches |
| Length | 6.14 Inches |
| Weight | 6.63 Pounds |
Benefits of Travel Trailer Jack Stands
When you’re towing a travel trailer, it’s important to have the best possible jack stands. After all, they are what keep your trailer from tipping over when you’re not around.
There are many different brands and styles of jack stands available on the market today. But which ones are the best?
Here are three things to look for when choosing jack stands for your travel trailer:
1. Durability – You want a set of jack stands that will last for years. Look for a heavy-duty set that can support a lot of weight. Also, make sure the legs are made from steel or another strong metal.
2. Height – Make sure the jack stand height is adjustable so you can use them with different size trailers (and even cars).3 3 . Ease of Use – You don’t want to struggle with using your jack stands; look for a set that is easy to operate .
Buying Guide for Best Travel Trailer Jack Stands
When you are shopping for the best travel trailer jack stands, there are a few things that you will want to keep in mind. First, you will want to make sure that the jack stand is rated for the weight of your travel trailer. Second, you will want to make sure that the jack stand is easy to use and is adjustable so that you can get it into the correct position. Finally, you will want to make sure that the jack stand has a wide base so that it is stable and does not tip over.
Frequently Asked Question
What are the best travel trailer jack stands for your specific needs?
There is no definitive answer to this question as it depends on your specific needs. Some factors to consider include the weight and size of your travel trailer, the terrain you’ll be using the jack stands on, and your budget. Some popular brands of travel trailer jack stands include Stable-Lift, Camco, and Ultra-Fab.
How do you determine which size jack stand to use for your travel trailer?
The size of the jack stand you will need to use for your travel trailer will be determined by the weight of your trailer.
How much weight can each jack stand support?
Most jack stands are rated to support between 3,000 and 6,000 pounds.
How do you properly position jack stands beneath your travel trailer?
There are a few things to consider when positioning jack stands beneath your travel trailer. First, you’ll need to identify a level spot on which to place your trailer. Once you’ve found a level spot, you’ll need to chock the trailer’s wheels to prevent it from rolling. Next, you’ll need to determine where to place the jack stands. The best place to position the jack stands is beneath the trailer’s frame, near the trailer’s axle. Finally, you’ll need to raise the trailer up off the ground using a jack, and then place the jack stands beneath the trailer.
What are the consequences of not using jack stands correctly?
If you do not use jack stands correctly, the consequences can be very serious. The most common consequence is the car falling off the jack, which can cause serious injury or death. Other consequences include the car rolling off the jack, the jack collapsing, and the car slipping off the jack.
Conclusion
Thank you for your time. I know you’re busy, so I’ll just get right to the point. Travel trailer jack stands are an essential piece of equipment for anyone who regularly tows a trailer behind their vehicle. They provide stability and peace of mind, knowing that your trailer is securely parked and not going anywhere.
I strongly believe that investing in a set of travel trailer jack stands is a wise decision, and I hope you will too. They are not expensive, and they could potentially save you a lot of money in the long run by preventing damage to your trailer or vehicle.
Thank you for considering my products, and I hope you have a great day.