A zone valve is used to control the flow of water to a specific zone in a hydronic heating system. A zone valve is typically installed on each floor of a building and is controlled by a thermostat. Each zone valve has a spring-loaded closing mechanism and an electronically controlled opening mechanism. When the thermostat calls for heat, the opening mechanism energizes and opens the valve. This allows water to flow from the boiler through the piping to the radiators or other heat emitting devices in that zone. When the call for heat ends, the closing mechanism slowly closes the valve and stops the flow of water.
Why Taco Zone Valve Head Is Necessary?
A taco zone valve head is a device that helps to regulate the flow of water in a plumbing system. It is typically installed near the main water supply lines and consists of a handle, a diaphragm, and a spring. The handle controls the position of the diaphragm, which in turn regulates the amount of water that is allowed to flow through the valve. The spring helps to keep the diaphragm in place and prevent it from moving back and forth too much.
Taco zone valves are designed to save water by only allowing water to flow through when it is needed. This can help to conserve resources and lower your monthly bills. In addition, taco zone valves can help prevent leaks by shutting off the Flow if no activity is detected for a period of time.
Our Top Picks For Best Taco Zone Valve Head
Best Taco Zone Valve Head Guidance
If your Taco Series 570 or 550 Zone Valve is in need of a replacement power head, the Taco 555-050RP is the perfect part for the job. This durable and reliable power head is designed specifically for use with Taco Series 570 and 550 Zone Valves, and is easy to install. With its precision engineering and high quality construction, the Taco 555-050RP is built to last, and will keep your Taco Zone Valve operating at peak performance for years to come.
Common Questions on Taco 555-050RP Zone Valve Power Head Replacement Part
• What is the replacement part for the Taco 555-050RP zone valve power head?The Taco Replacement Zone Valve Power Head is the replacement part for the Taco 555-050RP zone valve power head.
• How do you install the Taco Replacement Zone Valve Power Head?
First, disconnect the power to the zone valve. Second, remove the old power head by unscrewing it from the valve body. Third, screw the new power head onto the valve body. Fourth, reattach the wires to the new power head. Fifth, turn the power back on to the zone valve.
Why We Like This
The Taco 555 050RP Zone Valve Power Head Replacement Part is a replacement part for Taco Series 570 Zone Valves.
The Taco 555 050RP Zone Valve Power Head Replacement Part is also a replacement part for Taco Series 550 Zone Valves.
The Taco 555 050RP Zone Valve Power Head Replacement Part is made from high quality materials.
The Taco 555 050RP Zone Valve Power Head Replacement Part is easy to install.
The Taco 555 050RP Zone Valve Power Head Replacement Part is backed by a 1 year warranty.
Additional Product Information
| Color | Original Version |
| Height | 1.9 Inches |
| Length | 3.3 Inches |
| Weight | 0.5 Pounds |
If you’re in need of a quality zone valve, the Taco T571-2 3/4-Inch Gold Series Zone Valve is a great option. Its exclusive heat motor functions silently and efficiently, while its two-way design makes it easy to install and use. This valve is also durable, with a max fluid temperature of 240 degrees and a min fluid temperature of 40 degrees.
Common Questions on Taco T571-2 3/4-Inch Gold Series Zone Valve
• What is the Taco T571-2 3/4-Inch Gold Series Zone Valve?The Taco T571-2 3/4-Inch Gold Series Zone Valve is a 3/4-inch zone valve that is used to control the flow of water in a hydronic heating or cooling system.
• What are the dimensions of the Taco T571-2 3/4-Inch Gold Series Zone Valve?
The Taco T571-2 3/4-Inch Gold Series Zone Valve has a width of 3/4 inches and a height of 2 inches.
• How much water can the Taco T571-2 3/4-Inch Gold Series Zone Valve control?
The Taco T571-2 3/4-Inch Gold Series Zone Valve can control up to 26 gallons per minute.
• What is the maximum operating pressure for the Taco T571-2 3/4-Inch Gold Series Zone Valve?
The Taco T571-2 3/4-Inch Gold Series Zone Valve has a maximum operating pressure of 125 psi.
• What is the maximum temperature for the Taco T571-2 3/4-In
Why We Like This
• • 1. The Taco T571 2 3/4 Inch Gold Series Zone Valve is a high quality product that is manufactured in the United States.• 2. This zone valve is designed to function silently, making it ideal for use in a variety of settings.• 3. The Taco T571 2 3/4 Inch Gold Series Zone Valve is easy to install and use, and it comes with a variety of features that make it a great value.• 4. This zone valve is made of high quality materials that are designed to withstand a wide range of temperatures.• 5. The Taco T571 2 3/4 Inch Gold Series Zone Valve is backed by a one year warranty.
Additional Product Information
| Color | Multicolored |
| Height | 5 Inches |
| Length | 3.5 Inches |
| Weight | 2 Pounds |
If you’re in the market for a new power head for your 556-G2, 557-G2, or 5101-G2 geothermal zone valve, the Taco 555-173RP is a great option to consider. This replacement power head is designed to provide superior performance and durability, and it comes with a one-year warranty from the manufacturer.
The Taco 555-173RP features a patent-pending self-lubricating design that reduces friction and wear, and it’s also been engineered for quiet operation. Additionally, the unit is easy to install and comes with all the necessary hardware.
When it comes to geothermal zone valves, the Taco 555-173RP is a great option that is sure to provide superior performance and durability. Be sure to check it out!
Common Questions on Taco 555-173RP – Replacement Power Head for 556-G2, 557-G2 & 5101-G2 Geothermal Zone Valves
• What is the model number of the replacement power head for the 556-G2, 557-G2, and 5101-G2 Geothermal Zone Valves?The model number is 555-173RP.
• What are the dimensions of the replacement power head for the 556-G2, 557-G2, and 5101-G2 Geothermal Zone Valves?
The dimensions are 3.5″ x 2.5″ x 2.25″.
• What is the weight of the replacement power head for the 556-G2, 557-G2, and 5101-G2 Geothermal Zone Valves?
The weight is 0.5 pounds.
• What is the voltage of the replacement power head for the 556-G2, 557-G2, and 5101-G2 Geothermal Zone Valves?
The voltage is 24 volts AC.
• What is the warranty of the replacement power head for the 556-G2, 557-G2, and 5101-G2 Geothermal Zone Valves?
The warranty is one year.
Why We Like This
1. The Taco 555 173RP is a replacement power head for the 556 G2, 557 G2, and 5101 G2 geothermal zone valves.
2. It is designed for use with Taco’s line of geothermal zone valves, which are used to control the flow of water in hydronic heating and cooling systems.
3. The power head is made of durable materials and is designed for long lasting performance.
4. It is easy to install and comes with all the necessary hardware.
5. The power head comes with a one year warranty.
Taco Zone Valves are the industry’s top choice for consistent performance. Rugged dependability and silent operation make them ideal for a variety of applications. The twist-off head design makes maintenance and installation quick and easy, while the bellows or globe valve construction ensures positive shut-off and leak proof operation.
Common Questions on Taco T572-3 1-Inch Zone Valve
• What is the Taco T572-3 1-Inch Zone Valve?The Taco T572-3 1-Inch Zone Valve is a zone valve that is used in a hydronic heating system.
• How does the Taco T572-3 1-Inch Zone Valve work?
The Taco T572-3 1-Inch Zone Valve is used to control the flow of water in a hydronic heating system.
• Where can I find the Taco T572-3 1-Inch Zone Valve?
The Taco T572-3 1-Inch Zone Valve can be found at most hardware stores or online retailers that sell hydronic heating supplies.
• How much does the Taco T572-3 1-Inch Zone Valve cost?
The Taco T572-3 1-Inch Zone Valve retails for around $70.00.
Why We Like This
• 1. Proven Performance millions in use• 2. Rugged dependability• 3. Silent operation• 4. Twist off head• 5. Bellows or globe valve construction
Additional Product Information
| Height | 5 Inches |
| Length | 3.75 Inches |
If you’re looking for a reliable, corrosion-resistant geothermal valve that can handle high-head pumps and eliminate water hammer, the Taco 5101-G3 is an excellent choice. Its internal parts are designed for silent operation, making it a great option for both residential and commercial applications.
Common Questions on Taco 5101-G3 Zone Geothermal Valve
• What is the Taco 5101-G3 Zone Geothermal Valve?The Taco 5101-G3 Zone Geothermal Valve is a zoning valve that is used in hydronic heating and cooling systems. It is used to control the flow of water to the zones in a system.
• How does the Taco 5101-G3 Zone Geothermal Valve work?
The Taco 5101-G3 Zone Geothermal Valve works by regulating the flow of water to the zones in a hydronic heating and cooling system. It is controlled by a thermostat that turns it on and off as needed.
• What are the benefits of using the Taco 5101-G3 Zone Geothermal Valve?
The benefits of using the Taco 5101-G3 Zone Geothermal Valve include improved efficiency and comfort in a hydronic heating and cooling system. It can also help to save energy and money.
• How do I install the Taco 5101-G3 Zone Geothermal Valve?
The Taco 5101-G3 Zone Geothermal Valve is easy to install. It can be installed by a qualified technician in a matter of minutes.
• How do I use the Taco
Why We Like This
• 1. The Taco 5101 G3 Zone Geothermal Valve is a corrosion resistant, internal parts designed to close against high head pumps.• 2. The Geothermal valve eliminates water hammer.• 3. The L38 555 is the replacement head for the L37 906.• 4. The Geothermal Zone Valve has silent operation.• 5. The Geothermal Zone Valve is easy to install.
Additional Product Information
| Height | 5.5 Inches |
| Length | 3.5 Inches |
| Weight | 2.35 Pounds |
Benefits of Taco Zone Valve Head
A best taco zone valve head is a great way to improve the performance of your plumbing system. It can help you save money on your water bill, and it can also protect your home from damage caused by leaks. By using a zone valve head, you can create zones within your plumbing system that will allow you to use less water overall. You can also better control the amount of pressure in each zone, which can prevent damage to fixtures and pipes.
Buying Guide for Best Taco Zone Valve Head
When looking for the best taco zone valve head, there are a few things to keep in mind. First, consider the needs of your particular application. If you need a high-flow valve head for large systems, look for one that is rated for that purpose. Second, take into account the quality of the materials used and the manufacturing process. Choose a brand that uses high-quality components and has a good reputation for durability. Finally, make sure to select a model that is easy to install and maintain. With these factors in mind, you should be able to find the perfect taco zone valve head for your needs.
Frequently Asked Question
What are the benefits of a taco zone valve head?
A taco zone valve head provides a number of benefits, including: -Allows for easy installation and programming of zone valves-Offers superior flow control-Can be used with a wide variety of zone valve models-Is compatible with a variety of thermostats-Provides built-in diagnostics for easy troubleshooting-Includes a manual override feature for easy testing and maintenance
What are the different types of taco zone valve heads?
There are typically two types of taco zone valve heads: those with a built-in check valve, and those without a check valve. The type of valve head you need will depend on the specific application.
Which type of taco zone valve head is best for my application?
There is no definitive answer to this question as it depends on the specific application and what the user is looking for in a taco zone valve head. Some factors that could be considered include the flow rate required, the type of media being handled, the operating temperature, and the pressure rating.
How do I install a taco zone valve head?
Assuming you have the proper tools and knowledge to complete the installation: 1. Turn off the water to the house at the main shut-off valve. 2. Cut the pipe where you will be installing the zone valve head using a pipe cutter. 3. Deburr the end of the pipe with a reamer.4. Install the zone valve head onto the pipe, making sure that the arrow on the head is pointing in the direction of water flow. 5. Use two pipe wrenches to tighten the valve head onto the pipe. 6. Turn the water back on to the house and check for leaks.
How do I troubleshoot a taco zone valve head?
There are a few things you can do to troubleshoot a taco zone valve head: -Make sure that the power is turned on to the valve.-Check the wiring to the valve to make sure it is correct.-Turn the water supply off to the valve and then remove the valve head. Inspect the head for any damage or debris.-If the head is damaged, you will need to replace it. If there is debris in the head, you can try to clean it out with a small brush.-Once the head is replaced or cleaned, turn the water supply back on and check to see if the valve is working properly.
Conclusion
Best taco zone valve head is the best quality product that you can buy. It gives you the perfect performance that you need to have in order to get your tacos just right. You won’t be disappointed with this product, and you’ll be glad that you made the decision to purchase it.