Why Surface Mount D Ring Is Necessary?
Surface mount D-rings offer several advantages over traditional D-rings. They are easier to install, require no special tools or hardware, and provide a cleaner, more finished look. Surface mount D-rings are also less likely to loosen or fall out over time.
Our Top Picks For Best Surface Mount D Ring
Best Surface Mount D Ring Guidance
Sierra Pacific Engineering Stainless Steel Tie Down, Surface Mount D-Ring 6,000 lb. Capacity Tiedowns 4-Pack
This listing is for 4 Stainless Steel D-rings featuring a strong 5,000 lb rating (straight pull). WLL is 1,667 lb capacity* (see below for explanation). The material is 304SS (cold working stainless steel) per JIS G 4305:2012. There may be a slightly stronger magnetic reaction on the surface or close to the stamping edge, typically observed in cold working parts. Designed to withstand harsh environmental elements, they are ideal for outdoor use, especially in a marine setting. These d-rings will never rust. Don’t be fooled if over time there are brown surface spots, this is generally caused by atmospheric iron.
*RATED CAPACITY: Also known as “assembly capacity” or “break strength” is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new.
WORKING LOAD LIMIT: The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal DOT requires the WLL to be 1/3 of the Rated Capacity.
The 3/8 diameter ring measures 2-1/4 wide x 2-1/4 long on center. The TOP CAP
Common Questions on Sierra Pacific Engineering Stainless Steel Tie Down, Surface Mount D-Ring 6,000 lb. Capacity Tiedowns 4-Pack
• What are the dimensions of the Sierra Pacific Engineering Stainless Steel Tie Down, Surface Mount D-Ring 6,000 lb. Capacity Tiedowns 4-Pack?The Sierra Pacific Engineering Stainless Steel Tie Down, Surface Mount D-Ring 6,000 lb. Capacity Tiedowns 4-Pack has the following dimensions: 6 x 2.5 x 1 inches.
• How much can the Sierra Pacific Engineering Stainless Steel Tie Down, Surface Mount D-Ring 6,000 lb. Capacity Tiedowns 4-Pack hold?
The Sierra Pacific Engineering Stainless Steel Tie Down, Surface Mount D-Ring 6,000 lb. Capacity Tiedowns 4-Pack has a capacity of 6,000 lbs.
• What is the weight of the Sierra Pacific Engineering Stainless Steel Tie Down, Surface Mount D-Ring 6,000 lb. Capacity Tiedowns 4-Pack?
The Sierra Pacific Engineering Stainless Steel Tie Down, Surface Mount D-Ring 6,000 lb. Capacity Tiedowns 4-Pack weighs 4 ounces.
• What are the dimensions of the D-ring on the Sierra Pacific Engineering Stainless Steel Tie Down, Surface Mount D-Ring 6,000 lb.
Why We Like This
• 4 Stainless Steel D rings with a 5,000 lb rating (straight pull)• WLL is 1,667 lb capacity*• The material is 304SS (cold working stainless steel)• Ideal for outdoor use, especially in a marine setting• These d rings will never rust
Additional Product Information
| Color | silver |
JCHL D Rings Tie Down Anchors Hooks for Trailer Truck Bed Bracket Enclosed Points Pickup Camper Surface Mount D-Ring Heavy Duty 1/4″ 2400 Pound Capacity (10-Pack)
JCHL D Rings Tie Down Anchors Hooks for Trailer Truck Bed Bracket Enclosed Points Pickup Camper Surface Mount D-Ring Heavy Duty 1/4″ 2400 Pound Capacity (10-Pack) are made of exceptionally heavy duty zinc-plated solid steel, protected by zinc-plating to prevent corrosion and rust. They have a wide range of applications and can be used to anchor all sorts of logistic tie-down ratchet and cam buckle straps, ropes, hooks, and chains to secure cargo of all sizes and weights – bikes, ATVs, UTVs, quads, motorcycles, furniture, camping equipment, delivery boxes, appliances, heavy machinery and power tools, and other loads. The JCHL team strives to provide you with the highest quality products and best service possible, and we offer a 100% satisfaction guarantee.
Common Questions on JCHL D Rings Tie Down Anchors Hooks for Trailer Truck Bed Bracket Enclosed Points Pickup Camper Surface Mount D-Ring Heavy Duty 1/4″ 2400 Pound Capacity (10-Pack)
• What is the maximum weight capacity of the JCHL D Rings Tie Down Anchors Hooks?The maximum weight capacity of the JCHL D Rings Tie Down Anchors Hooks is 2400 pounds.
• What is the minimum weight capacity of the JCHL D Rings Tie Down Anchors Hooks?
The minimum weight capacity of the JCHL D Rings Tie Down Anchors Hooks is 1/4″ (0.64 cm).
• What are the dimensions of the JCHL D Rings Tie Down Anchors Hooks?
The dimensions of the JCHL D Rings Tie Down Anchors Hooks are 3.8″ x 2.6″ x 1.4″ (9.65 cm x 6.60 cm x 3.55 cm).
• What is the weight of the JCHL D Rings Tie Down Anchors Hooks?
The weight of the JCHL D Rings Tie Down Anchors Hooks is 10-Pack.
Why We Like This
• 1) 10 Pack D Ring tie downs for extra strength and longevity• 2) Made of heavy duty zinc plated steel for durability and rust prevention• 3) Easy installation with a screw or bolt through the bolting hole• 4) Can be used to anchor all types of straps, ropes, hooks, and chains• 5) 100% satisfaction guarantee from JCHL team
Additional Product Information
| Color | 10-Pack |
CURT 83740 3 x 3-Inch Surface-Mounted Trailer D-Ring Tie Down Anchor, 11,000 lbs Break Strength
The CURT 83740 3 x 3-Inch Surface-Mounted Trailer D-Ring Tie Down Anchor is a versatile and easy-to-use way to secure cargo loads in a trailer, truck bed or cargo van. The 3-1/2-inch x 3-1/2-inch x 1/2-inch trailer shackle provides a convenient anchor for ropes, cables, ratchet straps or binder chains (3 x 3-inch inside dimensions), while the solid steel bracket ensures a secure installation. With a corrosion-resistant zinc plating, this trailer tie down ring is built to withstand exposure to rain, dirt, temperature changes and UV damage.
Common Questions on CURT 83740 3 x 3-Inch Surface-Mounted Trailer D-Ring Tie Down Anchor, 11,000 lbs Break Strength
• What is the breaking strength of the CURT 83740 3 x 3-Inch Surface-Mounted Trailer D-Ring Tie Down Anchor?The CURT 83740 3 x 3-Inch Surface-Mounted Trailer D-Ring Tie Down Anchor has a breaking strength of 11,000 lbs.
• What is the maximum weight capacity of the CURT 83740 3 x 3-Inch Surface-Mounted Trailer D-Ring Tie Down Anchor?
The maximum weight capacity of the CURT 83740 3 x 3-Inch Surface-Mounted Trailer D-Ring Tie Down Anchor is 11,000 lbs.
• What are the dimensions of the CURT 83740 3 x 3-Inch Surface-Mounted Trailer D-Ring Tie Down Anchor?
The dimensions of the CURT 83740 3 x 3-Inch Surface-Mounted Trailer D-Ring Tie Down Anchor are 3 inches x 3 inches.
• Where can the CURT 83740 3 x 3-Inch Surface-Mounted Trailer D-Ring Tie Down Anchor be mounted?
Why We Like This
• Provides a standard, square 1 1/4 inch receiver hitch• Comes with a ball mount with a 3/4 inch ball hole to connect a small trailer• The 3 1/2 inch x 3 1/2 inch x 1/2 inch trailer shackle provides a convenient anchor for ropes, cables, ratchet straps or binder chains• Constructed from high strength steel• Finished with a corrosion resistant zinc plating
Additional Product Information
| Color | Yellow Zinc |
| Height | 1 Inches |
| Length | 4 Inches |
| Weight | 1 Pounds |
DC Cargo Mall 4 D-Ring Tie-Downs with Plastic Pan Fittings, Anchor Trailer Cargo Load with Floor Flush Surface Mount D-Rings; Safe Tie-Down Working Limit 533 pounds
The DC Cargo Mall 4 D-Ring Tie-Downs with Plastic Pan Fittings are a safe and reliable way to secure your load while transporting it. These D-Rings are made of galvanized steel for corrosion and rust resistance, and have a working load limit of 533 pounds. The plastic pan fitting anchors the D-Ring in place, and the 4″ pan-fitting provides a secure hold. These tie-downs are easy to install and provide a lifetime of dependable strength and versatility.
Common Questions on DC Cargo Mall 4 D-Ring Tie-Downs with Plastic Pan Fittings, Anchor Trailer Cargo Load with Floor Flush Surface Mount D-Rings; Safe Tie-Down Working Limit 533 pounds
• What is the working load limit for the DC Cargo Mall 4 D-Ring Tie-Downs with Plastic Pan Fittings?The working load limit for the DC Cargo Mall 4 D-Ring Tie-Downs with Plastic Pan Fittings is 533 pounds.
• What is the Safe Tie-Down Working Limit for the Anchor Trailer Cargo Load with Floor Flush Surface Mount D-Rings?
The safe tie-down working limit for the Anchor Trailer Cargo Load with Floor Flush Surface Mount D-Rings is also 533 pounds.
• How many D-Rings are included in the DC Cargo Mall 4 D-Ring Tie-Downs?
There are four D-Rings included in the DC Cargo Mall 4 D-Ring Tie-Downs.
• What is the measurements of the DC Cargo Mall 4 D-Ring Tie-Downs?
The measurements of the DC Cargo Mall 4 D-Ring Tie-Downs are 2″ x 4.5″.
Why We Like This
• 4 Pack of flush mount D rings• Rugged plastic pan fitting• Galvanized steel for corrosion and rust resistance• Working Load Limit: 533 pounds• Dimensions: 2 1/4″ x 2″ D ring with 1 1/2 by 1 13/16” inner clearance
D Rings Tie Down Anchors Hooks for Trailer Truck Bed Bracket Enclosed Points Pickup Camper Surface Mount D-Ring 1/4″ Heavy Duty 6 Pack w/ 7200 Pound Capacity
D-rings are one of the most versatile and handy tools you can have for securing things in your trailer, truck bed, or pickup camper. They are easy to install with just two bolts, and they provide a firm anchor point for ropes, bungee cords, or straps. Whether you’re tying down cargo on a flatbed trailer, hauling a load on your RV camper, or just want an extra tie-down point in your boat or van, D-rings are a great solution. They’re also perfect for use on ATVs, motorcycles, and other vehicles.
D-rings are made from high-strength steel for durability, and they have a assembly break strength of 1,200 pounds. They’re also galvanized with silver zinc to prevent corrosion and rust. Each D-ring has a working load limit of 400 pounds, so you can trust them to hold up under heavy use.
If you’re looking for a versatile, sturdy, and easy-to-use tie-down solution, D-rings are a great choice. With their many uses and simple installation, they’re a must-have for anyone who regularly uses a trailer, truck, or camper.
Common Questions on D Rings Tie Down Anchors Hooks for Trailer Truck Bed Bracket Enclosed Points Pickup Camper Surface Mount D-Ring 1/4″ Heavy Duty 6 Pack w/ 7200 Pound Capacity
• What are D Rings?D Rings are tie down anchors that can be used on a trailer, truck bed, or pickup camper.
• What is the capacity of the D Rings?
The D Rings have a capacity of 7200 pounds.
• How many D Rings are in a pack?
There are 6 D Rings in a pack.
Why We Like This
• 1. The D Rings are constructed from high strength steel for durability and have a working load limit of 400 lbs per pack.• 2. The Surface Mounted Tie Down D Ring is galvanized with silver zinc to prevent corrosion and rust.• 3. The D Ring is easy to fasten with just two bolts and basic hardware on metal surface or wood floor.• 4. The versatile D Ring is perfect for cargo management onto flatbed trailers, utility trucks, pickup beds, Loads on RV Campers, Boats, Vans, Kayaks, Motorcycles, Deliveries, ATVs, or anywhere else.• 5. If any missing parts or any questions during installing or using, just contact us and we will do our best to give you the most satisfactory solution.
Additional Product Information
| Color | silver |
| Weight | 0.1212542441 Pounds |
Benefits of Surface Mount D Ring
As more and more companies look for ways to improve their bottom line, they are turning to surface mount d-rings. These tiny devices offer a number of benefits that can save time and money.
Surface mount d-rings are typically made from stamped metal or plastic and have a round or square base. They are available in a variety of sizes, but the most common is the 3/16″ diameter ring. The rings are mounted on the PCB using screws, clips, soldering, or adhesive backing tape.
The primary benefit of surface mount d-rings is their low cost compared to traditional THM methods such as through-hole mounting or Press-Fit assembly.
Buying Guide for Best Surface Mount D Ring
When choosing a surface mount D-ring there are a few things you need to take into account in order to ensure you are getting the best possible product. The first is the material the D-ring is made from. Steel is the strongest and most durable option, however it is also the heaviest. Aluminum is a lighter weight alternative that is still strong, but not as tough as steel.
Next, you need to consider the size of the D-ring. They come in different capacities ranging from light duty (500lbs) to heavy duty (5000lbs). Be sure to select one that matches your needs.
Finally, you need to decide on a finish. There are several options available including powder coating, zinc plating, and stainless steel. Each has its own benefits and drawbacks so choose wisely according to your needs and preferences
Frequently Asked Question
What is the best surface mount d ring?
Some popular options include the D-Ring Tie Down Anchor from Erickson Manufacturing and the D-Ring Lashing Ring from D-Ring Inc.
What are the pros and cons of a surface mount d ring?
Some of the cons include that they can be more difficult to install, and they may not be as strong as other types of d rings.
What are the different types of surface mount d rings?
These rings are not as strong as metal surface mount d rings and can break under heavy loads. Metal surface mount d rings are much stronger, but they are also more expensive and can be difficult to install.
What are the dimensions of a surface mount d ring?
Most surface mount d rings are relatively small in size, with a diameter of around 1 inch (2.54 cm).
What is the weight capacity of a surface mount d ring?
Many surface mount d rings are designed to support weights of up to 500 pounds, making them ideal for use in a variety of applications.
Conclusion
Best Surface Mount D-Ring will provide the buyer with an excellent product that will hold up under the heaviest of loads. The D-Ring is made from high quality materials and construction that will give the buyer many years of trouble free use. With a money back guarantee, the buyer can be assured that they are getting a product that is worth every penny.