Why Subaru Ball Joint Puller Is Necessary?
A ball joint puller is an important piece of equipment for anyone who owns a vehicle. Ball joints are the joints that connect the suspension of your vehicle to the wheels. Over time, these joints can become worn and tear, which can cause your vehicle to shake or vibrate when driving. A ball joint puller allows you to remove these worn out ball joints so that you can replace them with new ones.
Our Top Picks For Best Subaru Ball Joint Puller
Best Subaru Ball Joint Puller Guidance
Astro Pneumatic Tool 78620 Subaru Ball Joint Puller
For difficult to remove, seized, rusted and/or corroded bolt-in Subaru ball joints, the Astro Pneumatic Tool 78620 Subaru Ball Joint Puller is designed for easy use with vehicle on jack stands using a deep 24mm socket and impact or hand wrench. The unique sliding pin non-rotating design removes ball joints in a single pulling motion without spinning the ball joint stud, reducing the chance of ball joint breakage. The Astro Pneumatic Tool 78620 Subaru Ball Joint Puller is compatible with Subaru Baja 2003+, Forester 1998+, Impreza 1993+, Legacy 1990+, Outback 2000+ and more. The included 5/8-18 thread adapter can also be used with any common slide hammer (arrives installed on tool, unthread to use alone).
Common Questions on Astro Pneumatic Tool 78620 Subaru Ball Joint Puller
• What is the weight of the Astro Pneumatic Tool 78620 Subaru Ball Joint Puller?The tool weighs 9.5 lbs.
• What is the length of the arm on the Astro Pneumatic Tool 78620 Subaru Ball Joint Puller?
The arm is 11 inches long.
• What is the width of the Astro Pneumatic Tool 78620 Subaru Ball Joint Puller?
The tool is 3.5 inches wide.
• What is the Astro Pneumatic Tool 78620 Subaru Ball Joint Puller made of?
The tool is made of steel.
Why We Like This
Astro Pneumatic Tool 78620 Subaru Ball Joint Puller is designed for easy use with vehicle on jack stands using a deep 24mm socket and impact or hand wrench.
Astro Pneumatic Tool 78620 Subaru Ball Joint Puller has a unique sliding pin non rotating design that removes ball joints in a single pulling motion without spinning the ball joint stud, reducing the chance of ball joint breakage.
Astro Pneumatic Tool 78620 Subaru Ball Joint Puller is for Subaru Baja 2003+, Forester 1998+, Impreza 1993+, Legacy 1990+, Outback 2000+ and more.
Astro Pneumatic Tool 78620 Subaru Ball Joint Puller comes with a 5/8 18 thread adapter with any common slide hammer (arrives installed on tool, unthread to use alone).
The Astro Pneumatic Tool 78620 Subaru Ball Joint Puller is made with high quality materials and is built to last.
Additional Product Information
| Height | 2.21 Inches |
| Length | 6.65 Inches |
| Weight | 1.8 Pounds |
CTA Tools 8881 Ball Joint Puller – Compatible with Subaru
If you’re looking for a quick, safe and efficient way to remove front suspension ball joints, the CTA Tools 8881 Ball Joint Puller is your best bet. With a 19mm (3/4″) hexagon drive spindle, it can be turned with a wrench or impact wrench, making it easy to use. Plus, the hex on the main socket body allows you to hold it in place while servicing. It’s compatible with Subaru Impreza (1993-2014), Forester (1998-2015), Legacy (1994-2014), Outback (1994-2014), Baja (2003-2006) and Saab 9-2X (2005-2006).
Common Questions on CTA Tools 8881 Ball Joint Puller – Compatible with Subaru
• What is the best way to remove a ball joint?A ball joint puller is the best way to remove a ball joint.
• What is the CTA Tools 8881 Ball Joint Puller compatible with?
The CTA Tools 8881 Ball Joint Puller is compatible with Subaru.
• How many times should the process be repeated?
The process should be repeated five times.
Why We Like This
1. The CTA Tools 8881 Ball Joint Puller is compatible with Subaru vehicles, making it a convenient tool for car owners.
2. The ball joint puller removes the front suspension ball joints quickly and efficiently, without damaging them.
3. The 19mm hexagon drive spindle can be turned with a wrench or impact wrench, making it easy to use.
4. The hex on the main socket body of the puller holds it in place while servicing, making it more convenient to use.
5. The CTA Tools 8881 Ball Joint Puller is also compatible with Saab 9 2X vehicles, making it a versatile tool.
Additional Product Information
| Color | Multi |
| Weight | 1.4991433816 Pounds |
OEMTOOLS 25112 Ball Joint Separator for Cars, Trucks, and SUVs, Ball Joint Removal Tool, Adjustable Ball Joint Puller Extends Up to 2 3/8 Inches
Are you in need of a ball joint separator for your car, truck or SUV? Look no further than the OEMTOOLS 25112 Ball Joint Separator. This efficient tool quickly and easily separates the ball joint from the spindle support arm on most newer domestic and import front wheel drive vehicles.
The OEMTOOLS 25112 Ball Joint Separator features an extended range, adjusting up to 2 3/8 inches to fit a variety of different vehicles. It also has a low profile design, allowing you to access tight spaces where most other ball joint separators wouldn’t be able to fit.
This ball joint removing tool is designed to be easy to use, simply twist the removable nut until the joint pops out. Plus, its clever design carries less risk of damaging the boot than a pickle fork joint remover and a hammer.
Make your life easier and pick up an OEMTOOLS 25112 Ball Joint Separator today.
Common Questions on OEMTOOLS 25112 Ball Joint Separator for Cars, Trucks, and SUVs, Ball Joint Removal Tool, Adjustable Ball Joint Puller Extends Up to 2 3/8 Inches
• What is the width of the jaws on the OEMTOOLS 25112 Ball Joint Separator?The maximum width of the jaws is 2 3/8 inches.
• What is the minimum width of the jaws on the OEMTOOLS 25112 Ball Joint Separator?
The minimum width of the jaws is 1 inch.
• How many times do you need to use the OEMTOOLS 25112 Ball Joint Separator in order to remove a ball joint?
In order to remove a ball joint, you need to repeat the process 5 times.
Why We Like This
• Efficiently separates ball joint from spindle support arm on most newer domestic and import front wheel drive vehicles, including trucks and SUVs• Adjusts up to 2 3/8 inches for various ball joints• Carry less risk of damaging the boot than a pickle fork joint remover and a hammer• Designed to access tight access where most ball joint separators won’t fit• The easiest means to replace top of the line ball joints
Additional Product Information
| Color | Multi |
| Height | 2.5 Inches |
| Length | 5.5 Inches |
Orion Motor Tech Ball Joint Separator, 1-1/8″ to 2-1/8″ Ball Joint Removal Tool for Separating Ball Joints Arms Tie Rods on Cars Trucks ATVs and More, Ball Joint Puller and Extractor with 1/2″ Socket
Orion Motor Tech’s ball joint separator is the perfect way to quickly and easily separate ball joints, arms, and tie rods from the spindle support arm on domestic and imported cars, trucks, ATVs, and more. This automotive tool includes a removable pin to fit into two pivot points to adjust to wider working areas and different ball joint sizes. Its 1-1/8″ to 2-1/8″ opening range ensures compatibility with most passenger vehicles.
This mechanic tool separates ball joints without damaging other components. The included 1/2 inch Cr-V structured socket works with your socket wrench to ensure easy ball joint removal in record time. Orion Motor Tech backs this ball joint puller with a strong 1 year warranty and our usual friendly 24/7 customer service.
Common Questions on Orion Motor Tech Ball Joint Separator, 1-1/8″ to 2-1/8″ Ball Joint Removal Tool for Separating Ball Joints Arms Tie Rods on Cars Trucks ATVs and More, Ball Joint Puller and Extractor with 1/2″ Socket
• What is the maximum ball joint size that this separator can accommodate?This separator can accommodate ball joints with a maximum size of 2-1/8″.
• What is the minimum ball joint size that this separator can accommodate?
This separator can accommodate ball joints with a minimum size of 1-1/8″.
• What power source does this separator require?
This separator requires a power source with a 1/2″ socket.
• How many times should this process be repeated?
This process should be repeated five times.
Why We Like This
• Separates ball joints without damaging other components• Made from premium AISI 1045 medium carbon steel• Includes a 1/2 inch Cr V structured socket• Backed by a strong 1 year warranty• Friendly 24/7 customer service
Additional Product Information
| Color | black |
| Height | 3 Inches |
| Length | 9 Inches |
| Weight | 3 Pounds |
MOOG K9513 Ball Joint
If you’re looking for a top-quality ball joint, the Moog K9513 is a great option. It’s made from strong and durable materials, and features a Belleville preload washer to help keep the bearing tight as it wears. The precision tolerances make for easy installation and alignment, and the pressed-in cover plate seals out debris and minimizes looseness. The K9513 is available for both foreign and domestic nameplates.
Common Questions on MOOG K9513 Ball Joint
• What is the MOOG K9513 Ball Joint?The MOOG K9513 Ball Joint is a part that connects the control arm to the wheel hub. It allows the wheel to move up and down while the control arm stays in place.
• What are the benefits of the MOOG K9513 Ball Joint?
The MOOG K9513 Ball Joint is designed to provide superior handling and stability. It is also greaseable for easy maintenance.
• What are the features of the MOOG K9513 Ball Joint?
The MOOG K9513 Ball Joint features a stud that is greasable for easy maintenance. It also has a dust cover that helps keep dirt and debris out of the joint.
• How do I install the MOOG K9513 Ball Joint?
Installation instructions can be found in the vehicle’s owner’s manual.
• What is the warranty on the MOOG K9513 Ball Joint?
The MOOG K9513 Ball Joint is backed by a limited lifetime warranty.
Why We Like This
• 1. Moog K9513 Ball Joint is made with heat treated ball studs to match or exceed OE requirements, making it strong and durable.• 2. The Belleville preload washer helps keep the bearing package tight, even as bearings wear.• 3. The pressed in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting a longer lifespan.• 4. Precision tolerances make for easy installation and steering alignment.• 5. Moog K9513 is available for foreign and domestic nameplates.
Additional Product Information
| Height | 0.4 Inches |
| Length | 0.4 Inches |
| Weight | 0.85098433132 Pounds |
Benefits of Subaru Ball Joint Puller
There are many benefits to using the best subaru ball joint puller. perhaps one of the most important is that it can save you time and money. In addition,it is a very valuable tool that can be used for a variety of different jobs.
Buying Guide for Best Subaru Ball Joint Puller
A ball joint puller is an essential tool for those who need to remove or replace the ball joints on their vehicle. There are many different types and sizes of ball joint pullers available, so it is important to know what to look for when choosing one.
Here are some things to consider when purchasing a ball joint puller:
-The size of the tool. Make sure to select a ball joint puller that is the correct size for your vehicle.
-The type of jaws. Some ball joint pullers have standard jaws, while others have serrated jaws. Serrated jaws are better for gripping onto theball joints and preventing them from slipping during removal.
-The material of the tool. Ball joint pullers are typically made from steel or aluminum. Steel is more durable but also heavier, while aluminum is lighter but not as durable. Choose the material based on your needs and preferences.
-The price. Ball joint pullers vary in price depending on their features and quality. Shop around to find the best deal on a quality tool that will last you years to come!
Frequently Asked Question
What is the best subaru ball joint puller for the money?
There is no definitive answer to this question as it depends on individual needs and preferences. Some factors to consider when choosing a Subaru ball joint puller include the type of vehicle, the size of the ball joint, and the budget.
What is the best subaru ball joint puller for the job?
Some of the more popular choices include the OTC 6575, the ABN Universal, and the Astro Pneumatic 7812.
What is the best subaru ball joint puller for the car?
Some popular subaru ball joint pullers include the Powerbuilt 648428 Unijack, the ABN Universal Ball Joint Separator, and the OTC 7918A Ball Joint Separator Set.
What is the best subaru ball joint puller for the truck?
Some general tips for choosing a subaru ball joint puller for a truck would include considering the size and weight of the truck, the type of suspension it has, and the specific requirements of the job. Additionally, it is always important to consult with a professional mechanic or other expert before making any final decisions.
What is the best subaru ball joint puller for the suv?
Many mechanics and automotive experts recommend using a ball joint separator tool, which can be purchased at most auto parts stores.
Conclusion
We know that you are looking for a reliable and affordable Subaru ball joint puller. Our product is just what you need to get the job done right. With our easy-to-use design, you will be able to remove joints quickly and easily. We are confident in our product and offer a money-back satisfaction guarantee.