There are a few different designs of oil pressure safety switch, but they all work in basically the same way. A diaphragm inside the switch is pushed down by the oil pressure, and when the pressure gets too low, the diaphragm activates a switch that cuts off the engine.
One of the most important things to look for in an oil pressure safety switch is that it is rated for the specific make and model of your vehicle. Different engines have different oil pressure requirements, so a switch that is designed for one engine might not work correctly on another.
Make sure to consult your owner’s manual or a qualified mechanic before installing an oil pressure safety switch, as improper installation can lead to engine damage.
Why Oil Pressure Safety Switch Is Necessary?
Oil pressure switches are important safety devices in modern cars and trucks. They are designed to monitor the oil pressure in the engine and warn the driver if it drops below a certain level. This can help prevent engine damage from low oil pressure, as well as avoid potential accidents if the driver becomes aware of the problem and pulls over to address it.
Our Top Picks For Best Oil Pressure Safety Switch
Best Oil Pressure Safety Switch Guidance
Carter Engine Oil Pressure Switch (A68301)
![Carter Engine Oil Pressure Switch (A68301)](https://m.media-amazon.com/images/I/41He4Lmh9sL._SL500_.jpg)
If your engine is overpressurized, the oil pressure safety switch will cut off the flow of oil to prevent damage. This Carter replacement part is a triple male terminal connector that is mounted on the engine block. It is a high-quality replacement for your original unit.
Common Questions on Carter Engine Oil Pressure Switch (A68301)
• What is the part number for the Carter engine oil pressure switch?The part number for the Carter engine oil pressure switch is A68301.
• What is the function of the Carter engine oil pressure switch?
The Carter engine oil pressure switch is used to turn the engine oil pump on and off in response to the oil pressure in the engine.
• What are the specifications of the Carter engine oil pressure switch?
The Carter engine oil pressure switch has a maximum pressure rating of 100 psi and a minimum pressure rating of 5 psi.
• How is the Carter engine oil pressure switch installed?
The Carter engine oil pressure switch is installed in the engine oil pressure line.
• What are the symptoms of a failing Carter engine oil pressure switch?
Symptoms of a failing Carter engine oil pressure switch include oil pressure gauge fluctuations and engine oil pressure warning light illumination.
Why We Like This
1. The Carter Engine Oil Pressure Switch is a quality replacement part that is designed to be mounted on the engine block.
2. The triple male terminal connector ensures a reliable connection.
3. The oil pressure safety switch is a critical component in ensuring the safety of your engine.
4. Carter products are known for their high quality and this product is no exception.
5. This oil pressure switch is an essential part of maintaining the proper functioning of your engine.
Additional Product Information
Height | 2 Inches |
Length | 7 Inches |
Weight | 0.15 Pounds |
Holley 12-810 Fuel Pump Safety Pressure Switch
![Holley 12-810 Fuel Pump Safety Pressure Switch](https://m.media-amazon.com/images/I/51adO5eqxKL._SL500_.jpg)
The Holley 12-810 Fuel Pump Safety Pressure Switch is a switch that reads oil pressure and will shut off the fuel pump when oil pressure drops below 5 psi. It includes detailed instructions and is durable and long lasting. This switch is a great way to prevent fuel pump failure due to low oil pressure.
Common Questions on Holley 12-810 Fuel Pump Safety Pressure Switch
• What is the part number for the Holley 12-810 Fuel Pump Safety Pressure Switch?12-810
• What is the function of the Holley 12-810 Fuel Pump Safety Pressure Switch?
The Holley 12-810 Fuel Pump Safety Pressure Switch is designed to shut off the fuel pump in the event of a fuel pressure leak, preventing engine damage.
• What are the dimensions of the Holley 12-810 Fuel Pump Safety Pressure Switch?
The Holley 12-810 Fuel Pump Safety Pressure Switch has a diameter of 3/4″ and a height of 1-1/4″.
• What is the maximum pressure that the Holley 12-810 Fuel Pump Safety Pressure Switch can withstand?
The Holley 12-810 Fuel Pump Safety Pressure Switch can withstand a maximum pressure of 15 psi.
• What is the minimum pressure that the Holley 12-810 Fuel Pump Safety Pressure Switch can withstand?
The Holley 12-810 Fuel Pump Safety Pressure Switch can withstand a minimum pressure of 5 psi.
Why We Like This
Safety pressure switch prevents fuel pump from running when oil pressure is low
Reads oil pressure and shuts off fuel pump when pressure drops below 5 psi
Durable and long lasting
Includes detailed instructions for easy installation
Vehicle specific for a perfect fit
Standard Motor Products, Inc. – Oil Pressure Sw (PS-135) Assorted, One Size
![Standard Motor Products, Inc. - Oil Pressure Sw (PS-135) Assorted, One Size](https://m.media-amazon.com/images/I/410U5MrRB4L._SL500_.jpg)
If you’re looking for a high-quality oil pressure switch, then you need the Standard Motor Products, Inc. – Oil Pressure Sw (PS-135). This switch is designed to fit a variety of vehicles, so you can be sure it will work with your car or truck. It’s also made from high-quality materials, so you can trust it to last. Plus, it’s easy to install, so you’ll be up and running in no time.
Common Questions on Standard Motor Products, Inc. – Oil Pressure Sw (PS-135) Assorted, One Size
• What is the Standard Motor Products, Inc. – Oil Pressure Sw (PS-135) Assorted, One Size?The Standard Motor Products, Inc. – Oil Pressure Sw (PS-135) Assorted, One Size is an oil pressure switch that come in a variety of sizes.
• What is the function of the Standard Motor Products, Inc. – Oil Pressure Sw (PS-135) Assorted, One Size?
The function of the Standard Motor Products, Inc. – Oil Pressure Sw (PS-135) Assorted, One Size is to monitor the oil pressure in the engine and to send a signal to the oil pressure gauge or warning light if the pressure is too low.
• What are the benefits of using the Standard Motor Products, Inc. – Oil Pressure Sw (PS-135) Assorted, One Size?
The benefits of using the Standard Motor Products, Inc. – Oil Pressure Sw (PS-135) Assorted, One Size is that it can help prevent engine damage by providing an early warning if the oil pressure is too low. It can also help improve engine performance by providing more accurate information to the oil pressure gauge or warning light.
• What are
Why We Like This
• 1. Part number: PS 135• 2. Fit type: Vehicle Specific• 3. Package Weight: 0050 pounds• 4. Package Dimensions: 7111 L x 3048 H x 3555 W (centimeters)• 5. Made in the USA
Additional Product Information
Color | Assorted |
Height | 3 Inches |
Length | 2 Inches |
Weight | 0.05 Pounds |
309-0641-03 1/8″ NPT Oil Pressure Switch, Low Oil Pressure Alarm Switch, Three-Wire Output, 1/8-27 NPT Thread
![309-0641-03 1/8](https://m.media-amazon.com/images/I/41fuPGDHAHL._SL500_.jpg)
An oil pressure switch is a device that monitors the oil pressure in an engine and alerts the driver if it drops below a preset level. Oil pressure switches are typically used in engines that are equipped with an oil pressure gauge. Many modern oil pressure switches also have a three-wire output that can be used to activate an oil pressure warning light on the dash.
The main purpose of an oil pressure switch is to protect the engine from damage due to low oil pressure. If the oil pressure in the engine drops below a certain level, the oil pressure switch will activate the oil pressure warning light on the dash. This will alert the driver that there is a problem and that they should pull over and check the oil level.
Oil pressure switches are typically installed in the engine block near the oil filter. They are usually located on the side of the block that is opposite the oil pressure gauge. Oil pressure switches are usually not very difficult to replace, but it is always a good idea to consult your owner’s manual or a qualified mechanic before attempting to do so.
Common Questions on 309-0641-03 1/8″ NPT Oil Pressure Switch, Low Oil Pressure Alarm Switch, Three-Wire Output, 1/8-27 NPT Thread
• What is the oil pressure switch used for?The oil pressure switch is used as an oil pressure gauge or as an alarm for low oil pressure.
• What is the pressure range for the oil pressure switch?
The pressure range for the oil pressure switch is 0-100 psi.
• What is the thread size for the oil pressure switch?
The thread size for the oil pressure switch is 1/8-27 NPT.
• What is the voltage rating for the oil pressure switch?
The voltage rating for the oil pressure switch is 250 VAC.
• What is the current rating for the oil pressure switch?
The current rating for the oil pressure switch is 30 A.
Why We Like This
• Oil pressure alarm switch is used with VDO, alarm pressure can be fine tuned• Mainly used in some imported generator equipment, the product quality is superior• High performance and reliability• Three wire output, housing is not grounded, analog quantity• It is also a perfect replacement for the broken or old one
ACDelco Professional C8020 Oil Pressure Switch
![ACDelco Professional C8020 Oil Pressure Switch](https://m.media-amazon.com/images/I/410argLdgDL._SL500_.jpg)
If you’re looking for a replacement oil pressure switch that provides the same level of performance and dependability as your original ACDelco unit, look no further than the Professional C8020 oil pressure switch. Manufactured to meet or exceed expectations for fit, form, and function, this aftermarket replacement oil pressure switch is an excellent choice for anyone looking to keep their vehicle running at its best.
Common Questions on ACDelco Professional C8020 Oil Pressure Switch
• What is the function of an oil pressure switch?An oil pressure switch is used to measure the oil pressure in an engine.
• What is the oil pressure range for an ACDelco Professional C8020 Oil Pressure Switch?
The oil pressure range for an ACDelco Professional C8020 Oil Pressure Switch is 0-100 psi.
• What is the thread size for an ACDelco Professional C8020 Oil Pressure Switch?
The thread size for an ACDelco Professional C8020 Oil Pressure Switch is 1/8” NPT.
• What is the voltage rating for an ACDelco Professional C8020 Oil Pressure Switch?
The voltage rating for an ACDelco Professional C8020 Oil Pressure Switch is 12 volts.
• What is the amperage rating for an ACDelco Professional C8020 Oil Pressure Switch?
The amperage rating for an ACDelco Professional C8020 Oil Pressure Switch is 1 amp.
Why We Like This
1. Professional, premium aftermarket replacement
2. Provides the performance and dependability you expect from ACDelco
3. Manufactured to meet expectations for fit, form, and function
4. Engineered to work in specific vehicles
5. Backed by a limited warranty
Additional Product Information
Height | 1.7 Inches |
Length | 3.6 Inches |
Benefits of Oil Pressure Safety Switch
An oil pressure safety switch is a device that helps to ensure the safe operation of a engine by monitoring the oil pressure and activating an alarm or shut-off mechanism if it falls below a certain level.
There are many benefits of having an oil pressure safety switch, including:
1. peace of mind knowing that your engine is being monitored for potential problems;
2. early warning of an issue so you can take corrective action before serious damage occurs;
3.
Buying Guide for Best Oil Pressure Safety Switch
An oil pressure safety switch is designed to shut off the engine if the oil pressure gets too low. This can prevent serious engine damage from occurring. Here are a few things to look for when purchasing an oil pressure safety switch:
1) Make sure the switch is compatible with your vehicle. There are many different types of switches, so it’s important to get one that will work with your car or truck.
2) Check the rating of the switch. You want one that can handle the amount of power your engine produces.
3) Choose a switch that has an adjustable cutoff point. This way, you can set it to turn off the engine at a specific oil pressure reading.
4) Consider getting a universal switch. These can be installed on almost any vehicle, making them a good choice if you own multiple vehicles or frequently change cars.
Frequently Asked Question
What is an oil pressure safety switch?
An oil pressure safety switch is a switch that is used to monitor the oil pressure in a system and shut down the system if the pressure gets too low.
How does an oil pressure safety switch work?
An oil pressure safety switch is designed to shut off the engine if the oil pressure gets too low. The switch is usually located near the oil filter or oil pump.
What are the benefits of an oil pressure safety switch?
Oil pressure safety switches are designed to shut off the flow of oil in the event of a drop in pressure. This can help prevent engine damage by preventing oil from reaching critical areas when there is insufficient pressure.
How do I choose the best oil pressure safety switch for my vehicle?
When choosing an oil pressure safety switch for your vehicle, it is important to consider the operating pressure range, the pressure settings, the electrical rating, and the mounting options. You will also want to make sure that the switch is compatible with your vehicle’s oil pressure system.
What are some things to keep in mind when installing an oil pressure safety switch?
Some things to keep in mind when installing an oil pressure safety switch are to make sure that the switch is compatible with the oil pressure sensor, to check the wiring to the switch, and to make sure that the switch is mounted in a secure location.
Conclusion
Thank you for considering our oil pressure safety switch. This is truly the best switch on the market, and we believe it will serve you well. We stand behind our product and offer a money-back guarantee if you’re not satisfied. We know you’ll be happy with your purchase.