Why Ls Intake Air Temperature Sensor Is Necessary?
An intake air temperature sensor is necessary in order to measure the temperature of the air coming into the engine. This information is used by the engine control unit to adjust fuel mixture and ignition timing.
Our Top Picks For Best Ls Intake Air Temperature Sensor
Best Ls Intake Air Temperature Sensor Guidance
ACDelco Professional 213-4663 Intake Manifold Temperature Sensor
If your engine is running too hot, it could be due to a faulty intake manifold temperature sensor. The ACDelco Professional 213-4663 Intake Manifold Temperature Sensor is a premium aftermarket replacement that provides the performance and dependability you expect from ACDelco. It is manufactured to meet or exceed expectations for fit, form, and function.
The intake manifold temperature sensor is located in the intake manifold, and its function is to measure the temperature of the air entering the engine. If the sensor is not working properly, it can cause the engine to run hotter than normal, which can lead to engine damage.
Symptoms of a faulty intake manifold temperature sensor include an overheating engine, engine misfires, and reduced fuel efficiency. If you experience any of these symptoms, it is important to have the sensor inspected and replaced if necessary.
ACDelco Professional Intake Manifold Temperature Sensors are designed to meet or exceed OEM standards for fit, form, and function. They are manufactured from high-quality materials to ensure long-lasting durability. With a wide range of applications, these sensors are sure to fit your specific needs. Trust ACDelco for all your automotive replacement parts needs.
Common Questions on ACDelco Professional 213-4663 Intake Manifold Temperature Sensor
• What is the function of an intake manifold temperature sensor?The intake manifold temperature sensor is responsible for measuring the temperature of the air inside the intake manifold.
• What are the symptoms of a faulty intake manifold temperature sensor?
Symptoms of a faulty intake manifold temperature sensor can include decreased fuel economy, engine Rough idle, and potentially stalling.
• How do you replace an intake manifold temperature sensor?
To replace an intake manifold temperature sensor, first disconnect the negative battery cable. Then remove the intake manifold temperature sensor and install the new sensor in its place. Finally, reconnect the negative battery cable.
Why We Like This
1. ACDelco Professional 213 4663 Intake Manifold Temperature Sensor is a professional, premium aftermarket replacement sensor.
2. It provides the performance and dependability you expect from ACDelco.
3. It is manufactured to meet expectations for fit, form, and function.
4. It is backed by a limited warranty from ACDelco.
5. It is designed for use with GM Gen III LS1/LS6 engines.
Additional Product Information
| Height | 2.2 Inches |
| Length | 4.3 Inches |
ACDelco GM Original Equipment 213-243 Air Cleaner Temperature Sensor
The ACDelco GM Original Equipment 213-243 Air Cleaner Temperature Sensor helps keep your engine operating at the proper temperature by sending accurate temperature readings to the gauge. This GM-recommended replacement part for your GM vehicle’s original factory component is manufactured to GM OE specification for fit, form, and function. It offers the quality, reliability, and durability of GM OE.
Common Questions on ACDelco GM Original Equipment 213-243 Air Cleaner Temperature Sensor
• What is the ACDelco GM Original Equipment 213-243 Air Cleaner Temperature Sensor?The ACDelco GM Original Equipment 213-243 Air Cleaner Temperature Sensor is a sensor that is installed in the air cleaner assembly. It is responsible for monitoring the air temperature inside the air cleaner assembly and sending a signal to the engine control module.
• Where is the ACDelco GM Original Equipment 213-243 Air Cleaner Temperature Sensor located?
The ACDelco GM Original Equipment 213-243 Air Cleaner Temperature Sensor is located in the air cleaner assembly.
• What is the function of the ACDelco GM Original Equipment 213-243 Air Cleaner Temperature Sensor?
The function of the ACDelco GM Original Equipment 213-243 Air Cleaner Temperature Sensor is to monitor the air temperature inside the air cleaner assembly and send a signal to the engine control module.
• How does the ACDelco GM Original Equipment 213-243 Air Cleaner Temperature Sensor work?
The ACDelco GM Original Equipment 213-243 Air Cleaner Temperature Sensor works by monitoring the air temperature inside the air cleaner assembly and sending a signal to the engine control module.
• What are the
Why We Like This
• • 1. Helps keep engine operating at proper temperature• 2. Sends accurate temperature readings to the gauge• 3. GM recommended replacement part for your GM vehicle• 4. Offering the quality, reliability, and durability of GM OE• 5. Manufactured to GM OE specification for fit, form, and function
Additional Product Information
| Height | 0.4 Inches |
| Length | 2.7 Inches |
| Weight | 0.01 Pounds |
ICT Billet Wire Connector Pigtail LS Intake Air Temperature Sensor IAT Turbo LS1 LSX Plug WPIAT30
The ICT Billet Wire Connector Pigtail LS Intake Air Temperature Sensor IAT Turbo LS1 LSX Plug WPIAT30 is a high quality wire connector that is perfect for your LS series engine. Assembled with OEM tooling and using OEM connectors, locks, seals, and terminals, this pigtail is a perfect fit for your engine. The wires are also color coded to match the factory harness colors, making it easy to install.
This pigtail is also assembled in Wichita, Kansas with USA made OEM grade TXL wire. This ensures that the pigtail is of the highest quality and will provide the most dependable and longest lasting connections.
Common Questions on ICT Billet Wire Connector Pigtail LS Intake Air Temperature Sensor IAT Turbo LS1 LSX Plug WPIAT30
• What is the ICT Billet Wire Connector Pigtail LS Intake Air Temperature Sensor IAT Turbo LS1?The ICT Billet Wire Connector Pigtail LS Intake Air Temperature Sensor IAT Turbo LS1 is an aftermarket pigtail that replaces the factory IAT sensor on LS engines. It is a three-wire connector that plugs into the IAT sensor and allows for an aftermarket IAT sensor to be used in place of the factory sensor.
• What are the benefits of using the ICT Billet Wire Connector Pigtail LS Intake Air Temperature Sensor IAT Turbo LS1?
The ICT Billet Wire Connector Pigtail LS Intake Air Temperature Sensor IAT Turbo LS1 offers a number of benefits including increased airflow and improved engine performance. Additionally, it is a direct replacement for the factory IAT sensor and is easy to install.
• What are the installation instructions for the ICT Billet Wire Connector Pigtail LS Intake Air Temperature Sensor IAT Turbo LS1?
Installation instructions can be found online at the ICT Billet website. Additionally, installation instructions are included with the pigtail.
Why We Like This
• 1. Perfect fit for LS series engines• 2. OEM grade TXL wire• 3. Made in Wichita, Kansas• 4. 6 inches of factory color wire included• 5. Highest quality wire connectors on the market
LIAMTU Intake Air Temperature Sensor Fast Response IAT Replaces Genuine GM Part 25036751 25037334
The LIAMTU Intake Air Temperature Sensor Fast Response IAT Replaces Genuine GM Part 25036751 25037334 is an engine air temperature sensor that is used to monitor the temperature of the air entering the engine. It is made from high quality materials and is built to strict quality control standards. This sensor is a replacement for the OEM part # 25036751 25037334. It is compatible with General Motors CHEVROLET and GMC vehicles.
Common Questions on LIAMTU Intake Air Temperature Sensor Fast Response IAT Replaces Genuine GM Part 25036751 25037334
• What is the name of the sensor?The sensor is called the LIAMTU Intake Air Temperature Sensor.
• What does the sensor do?
The sensor measures the temperature of the air entering the engine.
• Where is the sensor located?
The sensor is located in the intake air duct, before the air filter.
• What is the function of the air filter?
The air filter cleans the air entering the engine, to protect the engine from dirt and debris.
• How often should the air filter be replaced?
The air filter should be replaced every 12 months or 12,000 miles, whichever comes first.
Why We Like This
• 1. Engine air temperature sensor for OEM part # 25036751 25037334• 2. Fits General Motors CHEVROLET and GMC• 3. This IAT (or ACT/VAT/MCT/MAT/CTS) sensor monitors the temperature of the air entering the engine• 4. Made from high quality materials• 5. Built to strict quality control standards
ICT Billet Intake Air Temperature Sensor Wire Harness Extension 24″ LS Vortec Relocation IAT Connector Adapter Delphi Aptiv LS1 LQ4 Cold Air Solderless WEIAT30-24
The ICT Billet Intake Air Temperature Sensor Wire Harness Extension is the perfect way to extend the length of your factory harness. This extension is made with highest quality wire connectors on the market, for the most dependable, longest lasting connections. Assembled with OEM tooling, OEM (connector, lock, seals, and terminals),(uses OEM harness wire colors) for a perfect fit. Assembled in Wichita, Kansas with USA made OEM grade TXL wire.
Common Questions on ICT Billet Intake Air Temperature Sensor Wire Harness Extension 24″ LS Vortec Relocation IAT Connector Adapter Delphi Aptiv LS1 LQ4 Cold Air Solderless WEIAT30-24
• What is the ICT Billet Intake Air Temperature Sensor Wire Harness Extension 24″ LS Vortec Relocation IAT Connector Adapter Delphi Aptiv LS1 LQ4 Cold Air Solderless WEIAT30-24?The ICT Billet Intake Air Temperature Sensor Wire Harness Extension 24″ LS Vortec Relocation IAT Connector Adapter Delphi Aptiv LS1 LQ4 Cold Air Solderless WEIAT30-24 is a billet aluminum connector adapter that allows you to relocate your IAT sensor without having to cut or splice into your existing wire harness.
• Why would you want to relocate your IAT sensor?
There are several reasons why you might want to relocate your IAT sensor. One reason might be to prevent heat soak from the engine bay, which can cause inaccurate readings. Another reason might be to make installation of aftermarket cold air intake systems easier.
• How do you install the ICT Billet Intake Air Temperature Sensor Wire Harness Extension 24″ LS Vortec Relocation IAT Connector Adapter Delphi Aptiv LS1 LQ4 Cold Air Solderless WEIAT30-24?
Why We Like This
• 1. 24″ Extension Intake Air Temperature Sensor Wire Harness• 2. Assembled with OEM tooling, OEM (connector, lock, seals, and terminals),(uses OEM harness wire colors) for a perfect fit• 3. Assembled in Wichita, Kansas with USA made OEM grade TXL wire• 4. Extend The Length Of Your Factory Harness With ICT Billet Wire Extension Harnesses• 5. Highest Quality Wire Connectors On The Market, For the Most Dependable, Longest Lasting Connections
Benefits of Ls Intake Air Temperature Sensor
A well-functioning air intake temperature sensor is critical to optimal engine performance. The hotter the air going into the engine, the more powerful the combustion and thus, the higher the output. In fact, just a 10-degree increase in intake air temp can produce a significant power gain.
Not only does afalse reading from an intake air temp sensor foolthe ECUinto thinking that coolerair is coming in than is actuallythe case,but hot coolant enteringthe senorcan also give afaulty signal leadingto lean fuelmixturesand excessive spark advance– both of which can cause increased fuel consumption and pre-ignition problems.
Buying Guide for Best Ls Intake Air Temperature Sensor
When looking for the best intake air temperature sensor (IAT), there are several things you will want to consider. First, you need to determine what kind of engine you have and what size IAT sensor it requires. Second, you need to decide whether you want a standard or aftermarket IAT sensor. Aftermarket sensors are often more accurate than standard sensors, but they can be more expensive. Finally, you need to compare the features and prices of different IAT sensors before making your purchase.
Frequently Asked Question
What is the ideal air intake temperature for an ls engine?
There is no definitive answer to this question as it depends on a number of factors, including the specific ls engine in question as well as the operating conditions. Generally speaking, however, most ls engines will perform best when the air intake temperature is between approximately 50 and 70 degrees Fahrenheit.
What are the benefits of a cold air intake over a hot air intake?
A cold air intake typically pulls air from outside the engine compartment, where the air is cooler. A hot air intake pulls air from inside the engine compartment, where the air is hotter. The cooler the air is when it enters the engine, the more dense it is, and the more oxygen it contains. More oxygen in the air/fuel mixture means more power.
How does the air intake temperature sensor work?
The air intake temperature sensor is located in the air intake duct and measures the temperature of the air coming into the engine. The sensor sends a signal to the engine control unit (ECU) that is used to adjust the air/fuel mixture.
What are the symptoms of a failing air intake temperature sensor?
The most common symptom of a failing air intake temperature sensor is a decrease in fuel efficiency. The sensor may also cause the engine to run lean, or too rich.
How do you troubleshoot an air intake temperature sensor problem?
There are a few ways to troubleshoot an air intake temperature sensor problem: 1. Check for intake air leaks – a leaky intake will cause the sensor to read a lower than actual air temperature 2. Check the wiring harness and connectors for any loose, damaged, or corroded terminals 3. Use a digital multimeter to test the sensor for proper resistance 4. Replace the sensor if all else fails
Conclusion
Thank you for your time. I hope I have convinced you of the benefits of using a ls intake air temperature sensor. This product will help improve your engine’s performance by keeping the intake air cooler, and also help to improve fuel economy.