There are many different types of load resistors on the market, but the best led light load resistor kit is the one that includes everything you need to get started. This kit includes two different types of resistors (a 1 ohm and a 4 ohm), so you can use it with a variety of different LED bulbs. The kit also includes instructions on how to install the resistors, so you can get started right away.
Why Led Light Load Resistor Kit Is Necessary?
A load resistor is a very important and necessary part of any LED lighting system. Load resistors are used to safely dissipate the excess heat that is created when LEDs are operated at higher than their recommended current levels.
Without a load resistor, the excessive heat build-up can cause LED failure and/or damage to nearby components. Load resistors are also used to stabilize LED flickering or pulsing that can occur when certain types of LEDs are dimmed.
Our Top Picks For Best Led Light Load Resistor Kit
Best Led Light Load Resistor Kit Guidance
SYLVANIA – Load Equalizer 27 Watt (at 12.8V) – Turn Signal Load Equalizer for LED Light Bulbs, Corrects Hyper Flash & Bulb Out Warning (Pack of 2)
If you’re looking for a way to prevent hyper-flashing and bulb-out warnings when replacing your car’s headlight bulbs with LED replacements, then you’ll want to check out Sylvania’s Load Equalizer. Simply attach the equalizer to a flat metal surface for proper heat transfer, then attach the wires to those of the socket with the provided clips. The high cooling capacity heat sink of the Sylvania Load Equalizer lowers the surface temperature which is often overheated when LED replacement bulbs are used.
Common Questions on SYLVANIA – Load Equalizer 27 Watt (at 12.8V) – Turn Signal Load Equalizer for LED Light Bulbs, Corrects Hyper Flash & Bulb Out Warning (Pack of 2)
• What is Sylvania’s Load Equalizer 27 Watt (at 12.8V) used for?The Sylvania Load Equalizer 27 Watt is used to correct hyper flash and bulb out warning when using LED light bulbs.
• What are the benefits of using the Sylvania Load Equalizer 27 Watt?
The benefits of using the Sylvania Load Equalizer 27 Watt include correcting hyper flash and bulb out warning, as well as extending the life of your LED light bulbs.
• How do I install the Sylvania Load Equalizer 27 Watt?
Installation is easy – just peel and stick the equalizer to the back of your headlight lamp. Repeat this process for each LED light bulb you are using.
Why We Like This
• Prevents hyper flashing and bulb out warnings• Easy to mount• Lowers bulb temperature• For use with most vehicles• Sylvania standard of quality
Additional Product Information
| Color | Gold |
| Height | 2.93700787102 Inches |
| Length | 3.12598424878 Inches |
| Weight | 0.2 Pounds |
Auxbeam 3157 Anti Flicker Resistor Kit, 3157 3057 3457 T25 3047 3157B Load Resistor Fix LED Signal Light Hype Flash/Error Code 50W 8-Ohm (Pack of 2)
If you’re looking for an easy way to fix LED signal light issues like hyper flashing or burnt out bulbs, the Auxbeam 3157 Anti Flicker Resistor Kit is the perfect solution. This inline 50W 6-Ohm load resistor kit comes with two load resistors, which is usually all you need for one LED bulb installation. Simply connect the resistor between the car socket and the LED bulb to enjoy error-free lighting. Please note that load resistors will get very hot when in use, so be sure to mount them securely on a metal surface and keep them away from any plastic parts to avoid melting.
Common Questions on Auxbeam 3157 Anti Flicker Resistor Kit, 3157 3057 3457 T25 3047 3157B Load Resistor Fix LED Signal Light Hype Flash/Error Code 50W 8-Ohm (Pack of 2)
• What is the purpose of the Auxbeam 3157 Anti Flicker Resistor Kit?The purpose of the Auxbeam 3157 Anti Flicker Resistor Kit is to fix LED signal light hype flash or error code 50W 8-Ohm.
• What are the dimensions of the Auxbeam 3157 Anti Flicker Resistor Kit?
The dimensions of the Auxbeam 3157 Anti Flicker Resistor Kit are 3.54 x 1.38 x 0.39 inches.
• What is the weight of the Auxbeam 3157 Anti Flicker Resistor Kit?
The weight of the Auxbeam 3157 Anti Flicker Resistor Kit is 2.08 ounces.
• How many pieces are included in the Auxbeam 3157 Anti Flicker Resistor Kit?
There are two pieces included in the Auxbeam 3157 Anti Flicker Resistor Kit.
Why We Like This
• The perfect solution for hyper flashing, no flashing or burnt out bulb light issues• Inline 50W 6 Ohm load resistor, 2pcs load resistor, usually each LED bulb installation requires one resistor connected in parellel• Cross reference numbers: 3047 3047R 3057 3057A 3057R 3156A 3157 3157a 3157R 3457 3457A 3757a• Voltages: 12V, Wattage: 50W• Easy Installation: plug and play connector, connect between the car socket and the LED bulb, no wire cuting is necessary
50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights (Fix Hyper Flash, Warning Cancellor)
Load Resistors for LED Turn Signal Light or LED License Plate Lights:
Do you have problems with your LED turn signals or license plate lights? If your turn signal lights are flashing too fast or not working at all, it’s likely that you need to install load resistors. Load resistors are resistors that are installed in parallel with your turn signal or license plate light bulbs in order to simulate the load of a regular filament bulb. This will allow your turn signal lights to function properly and prevent hyper flashing or burnt out bulb indications.
LED load resistors are available in different wattage and ohm ratings depending on your application. For most applications, a 50 watt, 6 ohm load resistor will work well. We also offer a 2-pack of 50 watt, 6 ohm load resistors for even more resistance. These load resistors get very hot when working, so be sure to mount them on a metal surface for best results.
Installation is easy – simply connect one end of the load resistor to the positive terminal of your turn signal or license plate light bulb and the other end to the negative terminal. That’s all there is to it! With load resistors installed, your turn signal and license plate lights will function properly again.
Common Questions on 50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights (Fix Hyper Flash, Warning Cancellor)
• What is a 50W 6Ohm LED Load Resistor for LED Turn Signal Lights or LED License Plate Lights?A 50W 6Ohm LED Load Resistor is a device that helps to fix hyper flash, or the cancellation of warnings, when installing LED turn signal lights or LED license plate lights.
• What are the benefits of using a 50W 6Ohm LED Load Resistor for LED Turn Signal Lights or LED License Plate Lights?
Some benefits of using a 50W 6Ohm LED Load Resistor for LED Turn Signal Lights or LED License Plate Lights include fixing hyper flash and warning cancellations, as well as providing a longer lifespan for your LED lights.
• How do I install a 50W 6Ohm LED Load Resistor for LED Turn Signal Lights or LED License Plate Lights?
Installation instructions may vary depending on the exact make and model of your load resistor, so it is best to consult the manufacturer’s instructions. In general, however, you will need to connect the load resistor in line with the positive wire of your LED light.
Why We Like This
• 1. Fixes hyper flash or burnt out bulb indications for LED turn signal lights or LED license plate lights• 2. Comes with two 50 watt 6Ohm load resistors and four quick wire clips• 3. Load resistors get really HOT when working, so be sure to mount it on metal surface• 4. Can work on any vehicle• 5. One LED resistor is required for each turn signal bulb or each license plate light bulb
Additional Product Information
| Weight | 0.15 Pounds |
HUIQIAODS H11 H8 H9 880 881 Wire Harness Kit 50W 6Ohm LED Load Resistor Fix Hyper Flashing Blinking Canbus Error Warning Canceller Fit Upgrading LED Headlight Fog DRL Light 2Pcs
Installing LED bulbs on your vehicle can result in a few different error messages on your dashboard, or what’s known as “hyper-flash” (quick blinking) of your turn signals. This HUIQIAODS H11 H8 H9 880 881 Wire Harness Kit 50W 6Ohm LED Load Resistor Fix Hyper Flashing Blinking Canbus Error Warning Canceller Fit Upgrading LED Headlight Fog DRL Light 2Pcs helps to solve those problems by simulating traditional filament bulbs and eliminating error indications. It also clears up any “bulb out” or “OBC” error messages on your dash. These resistors get hot when they are in use, so be sure to mount them on metal and in a safe location away from important wiring.
Common Questions on HUIQIAODS H11 H8 H9 880 881 Wire Harness Kit 50W 6Ohm LED Load Resistor Fix Hyper Flashing Blinking Canbus Error Warning Canceller Fit Upgrading LED Headlight Fog DRL Light 2Pcs
• What are the dimensions of the H11 H8 H9 880 881 Wire Harness Kit 50W 6Ohm LED Load Resistor Fix Hyper Flashing Blinking Canbus Error Warning Canceller Fit Upgrading LED Headlight Fog DRL Light 2Pcs?The dimensions of the H11 H8 H9 880 881 Wire Harness Kit 50W 6Ohm LED Load Resistor Fix Hyper Flashing Blinking Canbus Error Warning Canceller Fit Upgrading LED Headlight Fog DRL Light 2Pcs are 3.94 x 2.76 x 0.79 inches.
• What is the weight of the H11 H8 H9 880 881 Wire Harness Kit 50W 6Ohm LED Load Resistor Fix Hyper Flashing Blinking Canbus Error Warning Canceller Fit Upgrading LED Headlight Fog DRL Light 2Pcs?
The weight of the H11 H8 H9 880 881 Wire Harness Kit 50W 6Ohm LED Load Resistor Fix Hyper Flashing Blinking Canbus Error Warning Canceller Fit Upgrading LED Headlight Fog DRL Light 2Pcs is 0.16 ounces.
• What is the wire harness made of?
Why We Like This
• 1. 2PCS 50W 6ohm led load resistor for headlight bulb fog lamp turn signal light daytime running light to solve common turn signal problems associated with LED bulb upgrades.• 2. To Solve “bulb out signal” / “OBC error message” after installing SMD LED light bulb and fast turn signal blinking response after installing SMD LED light bulb.• 3. Resistors get hot when they are operating We recommend that they be mounted on metal in a safe location away from important wiring.• 4. Clears OBC and CAN BUS warning errors on the dashboard when LED bulbs are installed.• 5. Simulates traditional filament bulbs to eliminate error indications for hyper flash (quick blinking) or burnt out bulb.
Additional Product Information
| Color | H11 50W 6Ohm LED Load Resistor |
O-NEX LED Resistor Kit HB4 9006 HID Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller (fits: 9005, 9145, H10)
If you’re looking for a way to solve error codes, flickering, and random shut offs with your LED or HID bulbs, the O-NEX LED Resistor Kit HB4 9006 HID Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller is a must-have. This heavy duty relay harness features 50W 8 ohm resistors that will prevent damage to your vehicle’s plastic components. With easy plug-n-play setup, this kit is essential for anyone looking for a reliable solution to their LED or HID bulb issue.
Common Questions on O-NEX LED Resistor Kit HB4 9006 HID Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller (fits: 9005, 9145, H10)
• What is the purpose of the O-NEX LED Resistor Kit?The O-NEX LED Resistor Kit is used to prevent flickering and error messages when using LED headlights with certain vehicles.
• Which vehicles are compatible with the O-NEX LED Resistor Kit?
The O-NEX LED Resistor Kit is compatible with 9005, 9145, and H10 headlights.
• Why do I need a resistor kit when using LED headlights?
Resistor kits are necessary when using LED headlights with certain vehicles in order to prevent flickering and error messages.
Why We Like This
• 1. This LED Resistor Kit comes with a heavy duty relay harness and a 50W 8 ohm resistor to help solve error codes, flickering, and random shut offs caused by aftermarket HID or LED bulbs.• 2. The kit is easy to install with a plug n play setup, and it is compatible with both HID and LED bulbs.• 3. The load resistor will get extremely hot, so it is important to mount it onto a metal area or hot resistant area to prevent damage to the vehicle.• 4. This product is designed to fit 9005, 9145, and H10 bulbs.• 5. Warning Load Resistor will get extremely hot, please mount them onto metal area or hot resistant area to prevent damage to the vehicle DO NOT mount on plastic.
Additional Product Information
| Height | 1 Inches |
| Length | 7 Inches |
Benefits of Led Light Load Resistor Kit
One of the most important benefits of using a LED load resistor kit is that it can help to improve your visibility when driving at night. By installing these resistors, you will be able to see the road more clearly and this can make it easier for you to avoid any potential hazards. Additionally, LED load resistors can also help to reduce the amount of glare that is produced by your headlights. This is especially beneficial if you live in an area where there are a lot of oncoming traffic lights or streetlights.
Buying Guide for Best Led Light Load Resistor Kit
A load resistor is an electrical component that is used to create resistance in a circuit. This resistance is created by the movement of electrons through the load resistor, which in turn creates heat. The heat produced by the load resistor is dissipated into the surrounding environment.
Load resistors are used in a variety of applications, including electronic devices, automotive applications, and electrical wiring systems. In electronic devices, load resistors are used to create voltage drops or to current-limit circuits. In automotive applications, load resistors are used to correct for improper headlight bulb wattage, to dim interior lights, or to fine-tune engine performance. In electrical wiring systems, load resistors are used to protect against voltage spikes or surges.
When choosing a led light load resistor kit, there are several things to consider:
The Wattage Of The Load Resistor:
The wattage of the load resistor should be greater than the wattage of the circuit being protected. For example, if you are using a 40 watt LED bulb in your headlight assembly, you will need a minimum 50 watt rated led light Load Resistor kit .
The Number Of Resistors Included In The Kit: Depending on your application you may need more than one led light Load Resistor . Most kits include two resistors per side (left and right) but some only include one per side .
Voltage & Current Requirements : You will need at least two different values for sure , one for voltage and another for current rating doesn typically go lower than 0.5 watts on these types of products but it s always best practice check with your supplier just make sure they understand what youre looking for before ordering anything off them
Some install instructions : If your going be working with any sort of 12 volt DC power source(automotive battery , motorcycle , boat etc )and running LEDs off it then its highly possible going need one these puppies Unless have existing setup already planned out know calculated total power draw down individual level detail we wont get too deep that148;s why best always ask professional get help making decisions like this place order best thing can do figure out how many LEDs planning use then add 10% 20% safety buffer account any unforeseen circumstances may pop during installation process
Frequently Asked Question
1) What are the benefits of using a led light load resistor kit?
There are many benefits of using a LED light load resistor kit. Some of the benefits include: 1. LED load resistors can help to improve the overall efficiency of your lighting system by reducing the amount of power that is wasted as heat. 2. LED load resistors can help to prolong the lifespan of your LED lights by reducing the amount of stress that is placed on the components. 3. LED load resistors can help to improve the quality of light output by ensuring that the correct amount of current is flowing through the LED lights. 4. LED load resistors can help to improve the safety of your lighting system by reducing the risk of electrical fires.
2) How easy is it to install a led light load resistor kit?
It is very easy to install a LED light load resistor kit. You just need to connect the two wires to the correct terminals on the kit, and then mount the resistor to a metal surface.
3) What are the different types of led light load resistor kits available on the market?
The different types of led light load resistor kits available on the market are surface-mount, through-hole, and wire-wound.
4) Which led light load resistor kit is the best for my application?
The best led light load resistor kit for your application will depend on the specific requirements of your project. Some factors to consider include the voltage and current rating of the resistors, the size and number of resistors needed, and the desired resistance value.
5) How much does a led light load resistor kit cost?
A led light load resistor kit typically costs between $10 and $20.
Conclusion
Thank you for considering our best led light load resistor kit. This product is perfect for anyone who wants to upgrade their current lighting system or who is looking for a more energy-efficient option. Our LED bulbs use less power than traditional incandescent or halogen bulbs, and they last significantly longer, so you’ll save money on your energy bills in the long run. In addition, our products are backed by a five-year warranty, so you can be confident in their quality and performance. We’re confident that you’ll be happy with your purchase, and we thank you for your business.