A failing or dirty crankshaft position sensor can cause a number of problems with your Elantra, including stalling, misfires, and poor fuel economy. If you’re experiencing any of these issues, it’s important to get your car checked out by a mechanic as soon as possible.
Why Hyundai Elantra Crankshaft Position Sensor Is Necessary?
A crankshaft position sensor is an electronic device used in an internal combustion engine, mounted on the crankshaft. Its function is to monitor the position and/or rotational speed of the crankshaft. This information is used by engine management systems to control ignition timing and other engine parameters.
In petrol engines, the Crankshaft Position Sensor (CPS) usually consists of a permanent magnet and either a Hall effect or inductive sensor. The most common type uses inductive sensing with a magnetic core inside the sensor that passes through a coil of wire when triggered by the crank’s position; this produces an electric current rather than just a digital output like with Hall sensors. In any case, as the magnet attached to the crank rotates past the CPS, it disturbs or alters this small current in predictable ways that can be converted into usable data by electronic circuits inside modern ECUs; as such it acts as both an input and output device for these systems (this makes diagnosis difficult without specialised equipment).
Diesel engines typically use optical sensors or variable reluctance pickups instead due to their greater robustness in dirty environments but petrol engines are increasingly using similar technologies too.
Our Top Picks For Best Hyundai Elantra Crankshaft Position Sensor
Best Hyundai Elantra Crankshaft Position Sensor Guidance
Genuine Hyundai 39180-2B000 Crankshaft Position Sensor
The crankshaft position sensor is a key component in any engine’s ignition system. In short, it helps the engine to start and run smoothly. The sensor measures the position of the crankshaft and relays this information to the engine control unit (ECU). This allows the ECU to properly fire the spark plugs and keep the engine running at its optimal performance.
Over time, the crankshaft position sensor can become damaged or fouled, which can cause the engine to misfire or run roughly. In some cases, the engine may not start at all. If you suspect that your crankshaft position sensor is failing, it’s important to have it checked out by a professional as soon as possible.
Original Equipment Manufacturer (OEM) quality crankshaft position sensors are an important part of maintaining your vehicle’s ignition system. When replacing a faulty sensor, it’s important to use an OEM sensor to ensure proper fitment and function. At Hyundai, we only use the highest quality OEM parts in all of our vehicles.
If you’re in need of a new crankshaft position sensor for your Hyundai, we have a great selection of genuine OEM sensors to choose from. Shop our online store
Common Questions on Genuine Hyundai 39180-2B000 Crankshaft Position Sensor
• What is the function of a Crankshaft Position Sensor?The Crankshaft Position Sensor’s function is to provide the engine control unit with information about the position and rotational speed of the crankshaft.
• How does the Crankshaft Position Sensor work?
The Crankshaft Position Sensor works by measuring the rotational speed of the crankshaft and sending this information to the engine control unit.
• What are the symptoms of a faulty Crankshaft Position Sensor?
The symptoms of a faulty Crankshaft Position Sensor include engine misfires, decreased fuel economy, and a check engine light.
• What are the causes of a faulty Crankshaft Position Sensor?
The causes of a faulty Crankshaft Position Sensor include physical damage, electrical problems, and contamination.
• How do you fix a faulty Crankshaft Position Sensor?
The best way to fix a faulty Crankshaft Position Sensor is to replace it with a new one.
Why We Like This
1. The Genuine Hyundai 39180 2B000 Crankshaft Position Sensor is an authentic OEM part.
2. This part is OEM quality, meaning it is the exact same part that came with your car.
3. The Genuine Hyundai 39180 2B000 Crankshaft Position Sensor is a direct fit part.
4. This part is essential to the proper functioning of your car’s engine.
5. The Genuine Hyundai 39180 2B000 Crankshaft Position Sensor is backed by Hyundai’s warranty.
Crankshaft Position Sensor 39180-2B000 391802B000 SU13885 Compatible with Hyundai Elantra Tucson Accent Veloster Kia Forte Koup Rio Soul Dodge Attitude 2011 2012 2013 2014 2015
This new engine crankshaft position sensor CPS is especially designed for Hyundai Elantra Tucson Accent Veloster Kia Forte Koup Rio Soul Dodge Attitude 2010 2011 2012 2013 2014 2015 L4 14 16 18 20 24 etc. Reference OE Number 39180-2B000 391802B000 SU13885 S0410058 0410058 0902267 TF-C465.
Common Questions on Crankshaft Position Sensor 39180-2B000 391802B000 SU13885 Compatible with Hyundai Elantra Tucson Accent Veloster Kia Forte Koup Rio Soul Dodge Attitude 2011 2012 2013 2014 2015
• What is the function of the crankshaft position sensor?The crankshaft position sensor is used to monitor the position and rotational speed of the crankshaft.
• Where is the crankshaft position sensor located?
The crankshaft position sensor is usually located near the crankshaft pulley or flywheel.
• What are the symptoms of a faulty crankshaft position sensor?
Symptoms of a faulty crankshaft position sensor can include engine misfires, stalling, or difficulty starting the engine.
• How do I test the crankshaft position sensor?
There are a few different ways to test the crankshaft position sensor. One way is to check for engine codes with a code reader or scan tool. Another way is to check the output voltage of the sensor with a multimeter.
• What can cause the crankshaft position sensor to fail?
There are a few different things that can cause the crankshaft position sensor to fail. Some common causes are corrosion or damage to the sensor connector, physical damage to the sensor, or
Why We Like This
• 1. New engine crankshaft position sensor CPS for Hyundai Elantra Tucson Accent Veloster Kia Forte Koup Rio Soul Dodge Attitude 2010 2015• 2. OE Number: 39180 2B000 391802B000 SU13885 S0410058 0410058 0902267 TF C465• 3. Please carefully check the connector and plug on our pictures make sure they are same as your old part before your purchase• 4. 1 year warranty. High quality assured. Please not hesitate to contact us to get an easy replacement or refund if you meet any problem with our part in warranty time• 5. Package includes: 1x Engine Crankshaft Position Sensor
Crankshaft Position Sensor, Crank Sensor 391802B000, 39180-2B000 Compatible with Hyundai Kia – 2012-2019 Accent Rio, 2011-2020 Elantra Soul, 2014-2020 Tucson Forte, 2012-2021 Veloster, 14-2018 Forte5
A crankshaft position sensor is a vital piece of equipment on modern vehicles. It relays information to the engine control unit about the position of the crankshaft, and is therefore crucial for the proper functioning of the engine. Unfortunately, like all parts of the vehicle, it is subject to wear and tear, and can eventually fail.
When a crankshaft position sensor fails, it can cause a number of problems with the vehicle. The most common symptom is difficulty starting the engine, as the ECU will not be able to properly calculate the position of the crankshaft. The engine may also stall intermittently, or run Roughly at idle. The check engine light may also come on, and the vehicle may experience reduced gas mileage.
If you suspect that your crankshaft position sensor has failed, the best course of action is to take the vehicle to a qualified mechanic or dealership for diagnosis and repair. Replacing a crankshaft position sensor is generally not a difficult task, but it is important to make sure that it is done correctly, as an incorrect installation can cause further problems.
Common Questions on Crankshaft Position Sensor, Crank Sensor 391802B000, 39180-2B000 Compatible with Hyundai Kia – 2012-2019 Accent Rio, 2011-2020 Elantra Soul, 2014-2020 Tucson Forte, 2012-2021 Veloster, 14-2018 Forte5
• What is a crankshaft position sensor?A crankshaft position sensor is a sensor that helps to determine the position of the crankshaft in an engine. This information can be used by the engine control module to help control the Ignition and fuel injection systems.
• Where is the crankshaft position sensor located?
The crankshaft position sensor is usually located near the crankshaft or flywheel. On some engines, it may be located on the timing belt cover or near the transmission.
• What does the crankshaft position sensor do?
The crankshaft position sensor provides information about the position of the crankshaft to the engine control module. This information can be used to help control the ignition and fuel injection systems.
• Why is the crankshaft position sensor important?
The crankshaft position sensor is important because it helps the engine control module to control the ignition and fuel injection systems.
• What are some symptoms of a bad crankshaft position sensor?
Some symptoms of a bad crankshaft
Why We Like This
• OE fit, form, and function• Crank position sensor compatible with a variety of Hyundai and Kia vehicles• Brand new and ready to install• Engineered for consistent product reliability• Installation instructions included
KEJSTED 39180-2B000 CPS Crankshaft Position Sensor Compatible with Hyundai Accent Elantra Tucson Veloster Kia Rio Forte Koup Soul Dodge Attitude 2011-2015 391802B000 S0410058 SU13885 0902267 0410058
KEJSTED Crankshaft Position Sensor is made of quality material for long life, stable performance. It is easy to install and is a great replacement for your old, damaged or missing crankshaft position sensor. This sensor is compatible with 2012-2014 Hyundai Accent, 2011-2015 Hyundai Elantra, 2014-2015 Hyundai Tucson, 2012-2015 Hyundai Veloster, 2014-2015 Kia Forte, 2014-2015 Kia Forte Koup, 2012-2014 Kia Rio, 2010-2018 Kia Soul, and 2012 Dodge Attitude models.
Common Questions on KEJSTED 39180-2B000 CPS Crankshaft Position Sensor Compatible with Hyundai Accent Elantra Tucson Veloster Kia Rio Forte Koup Soul Dodge Attitude 2011-2015 391802B000 S0410058 SU13885 0902267 0410058
• What is the KEJSTED 39180-2B000 CPS Crankshaft Position Sensor Compatible with Hyundai Accent Elantra Tucson Veloster Kia Rio Forte Koup Soul Dodge Attitude 2011-2015 391802B000 S0410058 SU13885 0902267 0410058?The KEJSTED 39180-2B000 CPS Crankshaft Position Sensor Compatible with Hyundai Accent Elantra Tucson Veloster Kia Rio Forte Koup Soul Dodge Attitude 2011-2015 391802B000 S0410058 SU13885 0902267 0410058 is a device that measures the rotational position of the crankshaft.
• What are the benefits of using a KEJSTED 39180-2B000 CPS Crankshaft Position Sensor?
The KEJSTED 39180-2B000 CPS Crankshaft Position Sensor can improve the accuracy of the engine timing, improve the fuel economy of the vehicle, and reduce emissions.
• Where is the KEJSTED 39180-2B000 CPS Crankshaft Position Sensor located?
The KEJSTED 39
Why We Like This
• 1. Crankshaft Position Sensor is made of quality material for long life, stable performance.• 2. Replace OE Part Number: 39180 2B000, 391802B000, 0902267, 39180 2B000, S10362, 1800735, PC934, 5S12470, SU13885, S0410058, 0410058, 0902267, 180 0735, TF C465.• 3. Easy to install: You can replace parts by yourself and solve your vehicle problems, just need to remove the old parts and install the new parts, so as to save you a lot of money and time• 4. Please check youtube video if you have installation problem.• 5. If the Crankshaft Position Sensor fails simply contact us for a replacement or refund, we will reply you within 12 working hours.
39180-23500 SU5876 Crankshaft Position Sensor Compatible with Hyundai Kia 2.0L,Tiburon 2003-2008,Tucson Spectra Spectra5 Sportage 2005-2009,Elantra 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011
The 39180-23500 SU5876 Crankshaft Position Sensor is a quick and easy installation for the compatible Hyundai Kia 2.0L engines. It is a perfect replacement for the OEM part and comes with a 1 year warranty. The sensor is manufactured to the high standard ensuring long-term stable performance. The compatible OEM part numbers are 96043 / 0410016 / DZ0603180 PC528 / 5S1778 / SU5876 39180-23500 / 3918023500.
Common Questions on 39180-23500 SU5876 Crankshaft Position Sensor Compatible with Hyundai Kia 2.0L,Tiburon 2003-2008,Tucson Spectra Spectra5 Sportage 2005-2009,Elantra 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011
• What is the function of a crankshaft position sensor?The crankshaft position sensor is used to determine the position of the crankshaft and to sync the engine’s firing order.
• Where is the crankshaft position sensor located?
The crankshaft position sensor is usually located near the crankshaft or camshaft.
• What are the symptoms of a bad crankshaft position sensor?
The symptoms of a bad crankshaft position sensor include engine misfires, stalling, and decreased fuel economy.
• How do you test a crankshaft position sensor?
To test a crankshaft position sensor, you will need a multimeter and an oscilloscope.
Why We Like This
• Designed for quick and easy installation• Compatible with Hyundai Kia 2.0L• 1 year warranty• Perfect replacement• Manufactured to the high standard
Additional Product Information
| Color | 39180-23500 |
Benefits of Hyundai Elantra Crankshaft Position Sensor
In order to ensure proper engine operation, the crankshaft position sensor must be working properly. This is a device that monitors the position and rotational speed of the crankshaft, and sends this information to the engine control unit. If there is a problem with the CPS, it can cause all sorts of drivability issues including stalling, surging, misfires, and hard starting.
The good news is that replacing a failed CPS is generally quite easy (certainly much easier than performing some other repairs) and relatively inexpensive. So if you are having any of these symptoms – or your check engine light is on – it’s worth taking your vehicle in for diagnosis to see if a faulty CPS is to blame.
Buying Guide for Best Hyundai Elantra Crankshaft Position Sensor
When it comes to choosing the best Hyundai Elantra Crankshaft Position Sensor, there are a few things you need to take into consideration. The first is what type of engine your vehicle has. There are four different types of engines available in the Elantra: 1.4L I4, 1.6L I4, 2.0L I4, and 2.4L I4. Each engine has its own specific crankshaft position sensor, so make sure you get the right one for your car.
The second thing you need to consider is where the sensor is located. There are two types of sensors: front-mounted and rear-mounted. Front-mounted sensors are located near the front wheels and have a direct connection to the engine’s computer system. Rear-mounted sensors are located at the back of the vehicle near the rear wheels and typically aren’t as directly connected to the computer system.
Thirdly, you’ll want to think about how many wires are going to be required for installation. The more wires involved, generally speaking, the more difficult it will be to install the sensor correctly (and troubleshoot any issues that might arise during installation). Choose a sensor with as few wires as possible to make installation as straightforward as possible
Frequently Asked Question
How to check Hyundai Elantra crankshaft position sensor?
There are a few ways to check the crankshaft position sensor on a Hyundai Elantra. One way is to use a multimeter to test the sensor for continuity. Another way is to use a Ohm meter to test the resistance of the sensor.
What are the symptoms of a bad Hyundai Elantra crankshaft position sensor?
A bad crankshaft position sensor in a Hyundai Elantra may cause the engine to stall, or it may cause the engine to run erratically.
How to replace Hyundai Elantra crankshaft position sensor?
If your Hyundai Elantra is experiencing issues with the crankshaft position sensor, it will need to be replaced. The crankshaft position sensor is located on the engine block, near the crankshaft pulley. To replace the sensor, you will need to remove the engine cover and the crankshaft pulley. Once the sensor is exposed, disconnect the electrical connector and remove the sensor. Install the new sensor in the same location and reconnect the electrical connector.
What can cause Hyundai Elantra crankshaft position sensor to fail?
The crankshaft position sensor can fail due to a number of reasons, including a bad connection, a short in the sensor, or a problem with the sensor itself.
How often does Hyundai Elantra crankshaft position sensor need to be replaced?
As a general guide, it is recommended that the crankshaft position sensor be replaced every 50,000 miles or so.
Conclusion
If you’re looking for a reliable and affordable crankshaft position sensor for your Hyundai Elantra, then this is the perfect product for you. It’s easy to install and comes with everything you need for a stress-free installation. With its easy-to-follow instructions, you’ll be up and running in no time. Plus, its affordable price means you won’t have to break the bank to keep your car running smoothly.