Our Top Picks For Best Floor Drain Air Gap
Best Floor Drain Air Gap Guidance
Universal Multi-Drain Air Gap for Condensates, Water Softeners and Water Filters with 1/2-inch and 3/4-inch PVC and Copper Pipe Adapters (AG180-002, GAP-A-DRAIN)
The AG180-002 air gap is the perfect way to ensure that your condensates, water softeners, and water filters are properly draining. With its 1/2-inch and 3/4-inch PVC and copper pipe adapters, this air gap easily connects to your existing plumbing, and its snap-in retainer provides a simple way to secure 1/2-inch pipes. For larger pipes, use a pipe support adapter and a stainless-steel worm clamp. Be sure to secure the pipes to a support structure within 12-24 inches from the air gap.
This air gap can be used with plastic or metal standpipes. If needed, it can be glued in place to a plastic standpipe using regular PVC adhesive. The air gap is designed to drain up to 36 gallons per minute safely, and the optimum recommended flow rate is 18 gallons per minute.
The AG180-002 uses a funnel design to assure a splash-free operation. During water softener operation, an initial discharge surge can create splashing. Funnel design and side splash guards eliminate the possibility of water splashing outside of the air gap. Make sure that P-trap is located minimum 12-inches from the top of the standpipe. This is needed
Common Questions on Universal Multi-Drain Air Gap for Condensates, Water Softeners and Water Filters with 1/2-inch and 3/4-inch PVC and Copper Pipe Adapters (AG180-002, GAP-A-DRAIN)
Why We Like This
• Easy to connect with pipe support adapters for 1/2 inch or 3/4 inch PVC and copper pipe• Can be glued in place to a plastic standpipe• Splash free operation with funnel design and side splash guards• Drainage control with recommended use of 22 degrees elbow inline with standpipe• Can accommodate up to 5 different discharge pipes
Additional Product Information
| Color | Gray |
| Height | 6.25 Inches |
| Length | 4.75 Inches |
Tru-Gap Air Gap Fixture w/ 1 Tubing Mount Bracket
A new home is a big investment, and you want to do everything you can to protect it. This is why installing a Tru-Gap air gap fixture is a smart move. Not only does it prevent backflow, but it also universal, so it can be used for condensates, water softeners, and water filters. Plus, the kit comes with everything you need for an easy installation.
Common Questions on Tru-Gap Air Gap Fixture w/ 1 Tubing Mount Bracket
• What is the Tru-Gap Air Gap Fixture?The Tru-Gap Air Gap Fixture is a device that is installed under a sink to provide a physical separation between the dishwasher and sewer lines. This helps to prevent backflow of contaminated water into the dishwasher.
• How is the Tru-Gap Air Gap Fixture installed?
The Tru-Gap Air Gap Fixture is installed by placing it under the sink and attaching it to the dishwasher and sewer lines.
• Why is the Tru-Gap Air Gap Fixture important?
The Tru-Gap Air Gap Fixture is important because it helps to prevent backflow of contaminated water into the dishwasher. This can cause serious health problems if contaminated water is ingested.
• What are the benefits of the Tru-Gap Air Gap Fixture?
The benefits of the Tru-Gap Air Gap Fixture include preventing backflow of contaminated water into the dishwasher and protecting against cross-contamination of water lines.
• What are the features of the Tru-Gap Air Gap Fixture?
The features of the Tru-Gap Air Gap Fixture
Why We Like This
1. The Tru Gap Air Gap Fixture is a great way to prevent backflow in your home.
2. The Universal Multi Drain Air Gap is perfect for condensates, water softeners and water filters.
3. The Easy to connect! All parts included! makes installation a breeze.
4. The Prevents backflow feature is a great way to keep your home safe.
5. The 1 Tubing Mount Bracket is a great way to keep your home organized.
Plumb Pak PP855-69 Air Gap for Standpipes, Grey, FITS 1-1/2″ AND 2″ METAL OR PLASTIC STANDPIPES
Common Questions on Plumb Pak PP855-69 Air Gap for Standpipes, Grey, FITS 1-1/2″ AND 2″ METAL OR PLASTIC STANDPIPES
• What is the function of an air gap in a standpipe?An air gap in a standpipe helps to prevent backflow of water and contamination of the potable water supply.
• What are the dimensions of the Plumb Pak PP855-69 air gap?
The Plumb Pak PP855-69 air gap has a height of 2-1/2 inches and a diameter of 1-1/2 inches. It is designed to fit 1-1/2 inch or 2 inch metal or plastic standpipes.
• What is the color of the Plumb Pak PP855-69 air gap?
The Plumb Pak PP855-69 air gap is grey.
Why We Like This
• Provides full backflow and anti siphon protection to prevent wastewater from getting into water supply• Fits 1 1/2 in and 2 in metal or plastic standpipes, can be mounted at 3 different levels• Allows soft rubber washer hose or aluminum washer drain hook up to share standpipe with other air gap units• For use with washing machine discharge, dehumidifiers, water filtration devices, and water softeners• UPC listed and tested for compliance to IPC and NSF standards, provides more than twice the code required minimum air gap opening
Additional Product Information
| Color | Gray |
| Height | 8.5 Inches |
| Length | 2 Inches |
Dual Air Gap for Water Softener and Reverse Osmosis with 1-1/2 inch and 3/8 or 1/4-inch inlets, 1-1/2 or 2-inch Standpipe (8500, GAP-CAP, AG130-001)
Water softener systems and reverse osmosis systems are common in many households today. Proper installation of these systems is critical to their function and longevity. An air gap is a crucial component in the installation of these systems, and the Gap-Cap air gap (AG130-001) is an excellent choice for both 1-1/2 inch and 3/8 or 1/4-inch inlets, 1-1/2 or 2-inch standpipes.
The Gap-Cap air gap has a 1/2-inch OD inlet port for 1/2-inch PVC pipe connection. The 1/2-inch inlet accommodates any 1/2-inch slip joint adapters, including a threaded end, barb connection, and a quick connect for PEX tubing. The same inlet also accommodates 5/8-inch OD tubing that can be directly inserted into the inlet. A 3/8-inch inlet port is provided for RO systems. This port can accommodate both 3/8-inch poly-tubing and 1/4-inch poly-tubing with the included adapter.
The Gap-Cap air gap inserts directly into the 1-1/2-inch and 2-inch standpipes
Common Questions on Dual Air Gap for Water Softener and Reverse Osmosis with 1-1/2 inch and 3/8 or 1/4-inch inlets, 1-1/2 or 2-inch Standpipe (8500, GAP-CAP, AG130-001)
• What are the benefits of having a dual air gap for a water softener and RO system? The benefits of having a dual air gap for a water softener and RO system include:
-Prevents backflow of contaminated water into the potable water supply.
-Helps to keep the system clean and free of contaminants.
-Allows for easy installation and maintenance of the system.
Why We Like This
Additional Product Information
| Color | White |
| Height | 2.25 Inches |
| Length | 4.25 Inches |
Water Filter/Softener Air Gap With 3/4-inch Female Threaded Inlet for Use With 1-1/2-inch or 2 inches (with coupler) Standpipe (ET115-002, G-175, DLA-G15)
Water Filter/Softener Air Gap With 3/4-inch Female Threaded Inlet for Use With 1-1/2-inch or 2 inches (with coupler) Standpipe (ET115-002, G-175, DLA-G15)
The ET115-002 is a water filter/softener air gap with a 3/4-inch female threaded inlet for use with 1-1/2-inch or 2-inch (with coupler) standpipes. The air gap has a minimum flow rate of 0.5 gallons per minute (GPM) and a maximum flow rate of 9 gallons per minute (GPM). The air gap is designed with a splash guard to ensure a dry operation and to prevent water from splashing back from the air gap. The air gap is also UPC (Uniform Plumbing Code) listed, IPC (International Plumbing Code) compliant, and NSF (National Sanitation Foundation) tested.
Common Questions on Water Filter/Softener Air Gap With 3/4-inch Female Threaded Inlet for Use With 1-1/2-inch or 2 inches (with coupler) Standpipe (ET115-002, G-175, DLA-G15)
Why We Like This
• Flow rate of 05 9 gallons per minute• Simple installation• Connects to 1 1/2″ or 2″ standpipe• Dry operation• UPC, IPC, and NSF tested
Additional Product Information
| Color | White |
Benefits of Floor Drain Air Gap
A floor drain air gap is a small opening between the floor drain and the sewer line. This opening allows water to seep into the sewer line, preventing sewage backup into your home. A floor drain air gap also prevents unwanted odors from escaping through the floor drain.
Buying Guide for Best Floor Drain Air Gap
A floor drain air gap is a small opening in the floor that allows water to drain away. The best Floor Drain Air Gap should be able to fit your needs and be able to work well with your home’s plumbing. There are many different types and sizes of these devices, so make sure to do your research before making a purchase. Consider the following when shopping for a floor drain air gap:
-Size: Make sure to measure the space where you plan on installing the device. You want an air gap that will cover the entire area and not be too big or too small.
-Type: There are many different types of floor drain air gaps available. Some have covers while others do not. Some also come with a built-in strainer which can help keep things like hair and other debris out of your drains. Choose the type that best suits your needs and preferences.
-Price: Air gaps can range in price depending on their size and features. Shop around to find the best deal on the one that meets all of your criteria.
Frequently Asked Question
What are floor drain air gaps?
A floor drain air gap is a device that is installed on a floor drain to prevent sewer gases from entering the building. The air gap is a small hole that is located between the floor drain and the sewer line. The air gap allows air to enter the sewer line, but not sewer gases.
What are the benefits of using a floor drain air gap?
A floor drain air gap is typically used in commercial kitchens to prevent clogs in the drains. The air gap allows air to enter the drain line and break up any grease or food that may be causing a clog.
What are the best types of floor drain air gaps?
Some common types of air gaps used for floor drains include: -A floor drain with an integral air gap: This type of air gap is built into the drain itself and is typically the easiest to install. -A floor drain with a separate air gap: This type of air gap is installed separately from the drain, typically using a sleeve or pipe. This can be more difficult to install but can provide a more reliable air gap. -A floor drain with an external air gap: This type of air gap is installed outside of the drain, typically using a vent pipe. This can be the most difficult to install but can provide the most reliable air gap.
What are the installation requirements for floor drain air gaps?
There are a few installation requirements for floor drain air gaps. The air gap must be installed on the floor drain before the trap, and it must be installed so that the top of the air gap is at least 6 inches above the floor. The air gap must also be installed so that it is easily accessible for cleaning.
How do floor drain air gaps work?
A floor drain air gap is a device that is installed in the floor drain to prevent sewage and other contaminants from backing up into the home. The air gap is a small gap that is left between the floor drain and the sewer line. This gap allows air to enter the sewer line and prevents sewage from backing up into the home.
Conclusion
play
Thank you for your time. I hope I have convinced you that the best floor drain air gap is the right choice for your needs. It is a reliable and affordable product that will help keep your home or business clean and free of unwanted water damage.