The most important factor in choosing a carburetor is the size of the engine. Craftsman chainsaws come in a variety of sizes, from small 14-inch models to large 24-inch beasts. The size of the carburetor must match the size of the engine, or the saw will not run properly.
The type of fuel used is also important. Craftsman chainsaws can run on either gasoline or propane. Each type of fuel has its own pros and cons, so it’s important to choose the right one for your needs. Gasoline is more commonly used because it’s less expensive and easier to find, but propane has its advantages too. Propane is less volatile than gasoline, so it’s safer to use and store. It also produces less emissions than gasoline, so it’s better for the environment.
Finally, you need to think about how you’ll be using your chainsaw. If you’re only going to be using it for light pruning and trimming tasks, then you don’t need a powerful model with a large carburetor. However, if you’re planning on felling trees or doing other heavy-duty work, then you’ll need a more powerful saw with a correspondingly large carburetor.
No matter what your needs are, there’s a Craftsman chainsaw that’s perfect for you. With so many models to choose from, finding the best one for your needs is easy.
Why Carburetor For A Craftsman Chainsaw Is Necessary?
A carburetor is a key component in any internal combustion engine, and it is responsible for supplying the engine with a mixture of air and fuel. The carburetor has a number of jets and passages that control the airflow and mix of air and fuel that enters the engine. The carburetor is also responsible for providing the engine with the correct amount of fuel at different speeds and under different load conditions.
A craftsman chainsaw typically uses a two-stroke engine, which means that there are two cycles – intake and compression – per revolution of the crankshaft. During the intake stroke, fresh air is drawn into the cylinder through an inlet port. The piston then moves upward during compression stroke, compressing this mixture of air and fuel before it is ignited by a spark plug at top dead center.
The correct mixture of air and fuel is essential for efficient operation of an internal combustion engine. If too much fuel is delivered to the cylinders, it can result in fouling spark plugs, excessive deposits on cylinder walls, or “knocking” (pinging) from uncontrolled combustion chamber temperatures. If too little fuel reaches the cylinders, incomplete combustion will occur which can lead to large amounts of unburned hydrocarbons being emitted from the exhaust system.
Our Top Picks For Best Carburetor For A Craftsman Chainsaw
Best Carburetor For A Craftsman Chainsaw Guidance
PP4218A Carburetor for Poulan Pro PP4218A PP4218AVX PP4018 PP3516AVX P3416 PP3816 P3314 18’’ 35cc 42cc Chainsaw Craftsman 358.350990 358.341900 358.350830 358350830 Walbro 0402 WTA30
When it comes to small engines, one of the most popular choices among consumers is the Poulan Pro PP4218A Carburetor. This unit is specifically designed for use with Poulan Pro PP4218AVX and Poulan Pro PP3516AVX chainsaws. It is a newer model that offers better performance and fuel efficiency. The carburetor has a Walbro 0402 WTA30 design and is made from high quality materials. It fits perfectly onto the Poulan Pro gas-powered chainsaw models listed above.
This Poulan Pro Carburetor comes with all the necessary parts for installation and operation. In the package, you will find the carburetor, two gaskets, one primer bulb, one primer line, one air filter, one fuel filter, two fitted fuel lines and a spark plug. The carburetor is easy to install and requires no special tools. Simply follow the instructions in the included manual.
Once installed, the Poulan Pro PP4218A Carburetor will provide you with years of trouble-free operation. It is backed by a 1-year warranty.
Common Questions on PP4218A Carburetor for Poulan Pro PP4218A PP4218AVX PP4018 PP3516AVX P3416 PP3816 P3314 18’’ 35cc 42cc Chainsaw Craftsman 358.350990 358.341900 358.350830 358350830 Walbro 0402 WTA30
• Is the carburetor adjustable?Yes, the carburetor is adjustable.
• How many times do you need to repeat the process?
You need to repeat the process five times.
• What are the unique values?
The unique values are the five different positions of the adjustment screws.
Why We Like This
• 1. Fits Poulan Pro PP4218A PP4218AVX PP4218AV PPB4218 PP4218AVHD PP4218AVL PR4218 PR3816 40cc 42cc Chainsaw• 2. Fits Poulan Pro PP4018 PPB4018 PP4018AV PP4018WM PP4018WT PP4018WTL 40cc 42cc Chainsaw• 3. Fits Poulan Pro P3314 P3314WS P3314WSA P3416 PP3416 PPB3416 P3416PR PP3516 PP3516AVX PP3818AV P3816 PP3816 PP3816AV Gas powered Chainsaw• 4. Fits Poulan Pro SM4218AV SM4218AVX SM4518AVX Craftsman 358350990 358350830 358351901 358351701 358350830 358351610 545070601 Chainsaw• 5. Package comes with one carburetor, two pieces of gaskets, one primer bulb, one primer line, one air filter, one fuel filter, two fitted fuel lines & a spark plug
AUTOKAY 545081885 Carburetor Fits for Walbro W-20 WT-324 WT-624 Carb Carby Craftsman Poulan Sears with Fuel Filter Spark Plug
If your lawn mower, go-kart, or other small engine isn’t starting, it might be time to rebuild or replace the carburetor. A carburetor mixes air and fuel in the right proportions to keep your engine running. Over time, however, your carburetor can become clogged with debris or malfunction due to wear and tear. When this happens, you’ll need to either rebuild or replace the carburetor.
Replacing the carburetor is generally quicker and easier than rebuilding it, but it’s also more expensive. You’ll need to decide which route is best for you based on your budget and skillset.
If you’re going to replace the carburetor, the first step is to find the right one for your engine. You’ll need to know the make and model of your engine, as well as the specific carburetor model. Once you have this information, you can purchase a carburetor from a lawn mower or small engine repair shop, or online.
Installing the carburetor is fairly straightforward, but you will need a few tools. You’ll need a screwdriver, a wrench, and pliers. You may also need a gasket scraper to remove the
Common Questions on AUTOKAY 545081885 Carburetor Fits for Walbro W-20 WT-324 WT-624 Carb Carby Craftsman Poulan Sears with Fuel Filter Spark Plug
• What is the model number of the carburetor?The model number of the carburetor is 545081885.
• Where is the carburetor located?
The carburetor is located on the engine, usually on the side of the engine near the air filter.
• How does the carburetor work?
The carburetor is responsible for mixing the correct amount of fuel with air and delivering it to the engine.
• What are the symptoms of a carburetor that needs to be cleaned?
A carburetor that needs to be cleaned may exhibit symptoms such as a loss of power, hesitations, or stalling.
Why We Like This
• OEM Poulan Number: 545081885 / 530069703 / 530071820 / 530071821 / 530071618 / 530071620 / 545006057 / 545006058 / 530035343 / 530071603• Replace for Walbro Number: WT 891 / W 20 / WT 89 / WT 324 / WT 391 / WT 600 / WT 624 / WT 625 / WT 637 / WT 662• Package Includes: 1 carburetor + 1 air filter + 1 primer bulb + 2 fuel line + 2 pcs gasket + 2 fuel filter + 1 spark plug• High quality aftermarket replacement• Easy to install
Harbot 530069703 530071621 Carburetor Gasket Air Filter For Poulan 1950 Predator 2150 2175 2350 2375 2450 2550 262 PP210 PP260 Chainsaw
Harbot 530069703 530071621 Carburetor Gasket Air Filter For Poulan 1950 Predator 2150 2175 2350 2375 2450 2550 262 PP210 PP260 Chainsaw is a must-have accessory for your Poulan chainsaw. This high-quality replacement carburetor provides superior performance, durability and long life. It fits Poulan chainsaw models: 222 / 262 / 1900 / 1950 / 1975 / 1975 woodshark / 2025 / 2050 / 2050WT / 2055 / 2075 / 2075c / 20750c / 2150 / 2150LE / 2150 Predator / 2155 /2175 / 2250 / 2350 / 2375 / 2450 / 2550 / 2550LE / PP220 / PP221LE /PP260 / PP260LE / SM4018 / S1634 / S1838. Replaces # 545081885 / 530069703 / 530071820 / 530071821 / 530071618 / 530071620 / 545006057 / 545006058 / 530035343 / 530071603. Package including 1 carburetor,1 fuel filter, 1 air filter,2
Common Questions on Harbot 530069703 530071621 Carburetor Gasket Air Filter For Poulan 1950 Predator 2150 2175 2350 2375 2450 2550 262 PP210 PP260 Chainsaw
• What are the dimensions of the Harbot 530069703 530071621 Carburetor Gasket Air Filter For Poulan 1950 Predator 2150 2175 2350 2375 2450 2550 262 PP210 PP260 Chainsaw?The Harbot 530069703 530071621 Carburetor Gasket Air Filter For Poulan 1950 Predator 2150 2175 2350 2375 2450 2550 262 PP210 PP260 Chainsaw has the following dimensions: Length – 11.81”, Width – 4.92”, Height – 2.76”.
• What is the weight of the Harbot 530069703 530071621 Carburetor Gasket Air Filter For Poulan 1950 Predator 2150 2175 2350 2375 2450 2550 262 PP210 PP260 Chainsaw?
The weight of the Harbot 530069703 530071621 Carburetor Gasket Air Filter For Poulan 1950 Predator 2150 2175 2350 2375 2450 2550 262 PP210 PP260 Chainsaw is 1.05 pounds.
• What is the part number for the replacement air filter for the Harbot
Why We Like This
• Fits Poulan chainsaw models: 222 / 262 / 1900 / 1950 / 1975 / 1975 woodshark / 2025 / 2050 / 2050WT / 2055 / 2075 / 2075c / 20750c / 2150 / 2150LE / 2150 Predator / 2155 /2175 / 2250 / 2350 / 2375 / 2450 / 2550 / 2550LE / PP220 / PP221LE /PP260 / PP260LE / SM4018 / S1634 / S1838• Replaces # 545081885 / 530069703 / 530071820 / 530071821 / 530071618 / 530071620 / 545006057 / 545006058 / 530035343 / 530071603• Package including 1 carburetor,1 fuel filter, 1 air filter,2 yellow fuel lines, 1 primer bulb,1 spark plug ,1 gasket• Yellow fuel line size:ID x OD:3/32” x 3/16” 2 feet long,ID x OD :008” x 014” 2 feet longWhite fuel line size:ID x OD:24” x 48”
Additional Product Information
| Height | 2 Inches |
| Length | 2 Inches |
Butom 545070601 Carburetor with Air Fuel Filter for Craftsman 358351710 358351700 358350990 358351900 358351820 358351600 358351810 358351800 358350820 358350830 358351610 Chainsaw C1M-W26
Butom 545070601 Carburetor with Air Fuel Filter for Craftsman 358351710 358351700 358350990 358351900 358351820 358351600 358351810 358351800 358350820 358350821 358350830 358351610 Chainsaw C1M-W26
Fit for Craftsman 358351710 358351700 358350990 358351900 358351820 358351600 358351810 358351800 358350820 358350821 358350870 358350880 358350830 358351610 Chainsaw
Replace #:C1M-W26 545070601 530035589 530035590 545040701
Package include 1 carburetor,1 air filter,2 gasket,1 primer bulb,1 fuel filter,1 spark plug
Common Questions on Butom 545070601 Carburetor with Air Fuel Filter for Craftsman 358351710 358351700 358350990 358351900 358351820 358351600 358351810 358351800 358350820 358350830 358351610 Chainsaw C1M-W26
• What is the model number for the Butom 545070601 Carburetor with Air Fuel Filter for Craftsman 358351710 358351700 358350990 358351900 358351820 358351600 358351810 358351800 358350820 358350830 358351610 Chainsaw C1M-W26?Butom 545070601 Carburetor with Air Fuel Filter for Craftsman 358351710 358351700 358350990 358351900 358351820 358351600 358351810 358351800 358350820 358350830 358351610 Chainsaw C1M-W26
• What is the purpose of the air fuel filter on the Butom 545070601 Carburetor with Air Fuel Filter for Craftsman 358351710 358351700 358350990 358351900 358351820 358351600 358351810 358351800 358350820 358350830 358351610 Chainsaw C1M-W26?
The air fuel filter is responsible for filtering out impurities in the air and fuel mixture that could damage the engine.
• How often should the air fuel filter be replaced on
Why We Like This
• 1. Fit for Craftsman 358351710 358351700 358350990 358351900 358351820 358351600 358351810 358351800 358350820 358350821 358350870 358350880 358350830 358351610 Chainsaw• 2. Replace #:C1M W26 545070601 530035589 530035590 545040701• 3. Package include 1 carburetor,1 air filter,2 gasket,1 primer bulb,1 fuel filter,1 spark plug• 4. Durable• 5. Easy to install
TOPEMAI PP5020AV Carburetor with 575296301 Air Filter for Poulan PP5020 2 Stroke Gas Chainsaw Replace 573952201 C1M-W47 Craftsman 358.350982
Chainsaws are one of the most versatile and handy tools that you can have in your arsenal. Whether you need to trim some branches in your yard, or you’re a professional logger, a chainsaw can make quick work of any tree.
But like any tool, a chainsaw needs to be properly maintained in order to function at its best. That’s why we offer the TOPEMAI PP5020AV Carburetor with 575296301 Air Filter for Poulan PP5020 2 Stroke Gas Chainsaw.
This carburetor is a direct replacement for the original carburetor on the Poulan PP5020 chainsaw. It comes with all the necessary gaskets and hardware for a quick and easy installation.
The 575296301 Air Filter is also a direct replacement for the original air filter on the Poulan PP5020 chainsaw. It helps to keep the engine clean and running smoothly.
If you’re looking for a quality replacement carburetor and air filter for your Poulan PP5020 chainsaw, then look no further than the TOPEMAI PP5020AV Carburetor with 575296301 Air Filter.
Common Questions on TOPEMAI PP5020AV Carburetor with 575296301 Air Filter for Poulan PP5020 2 Stroke Gas Chainsaw Replace 573952201 C1M-W47 Craftsman 358.350982
• What are the dimensions of the TOPEMAI PP5020AV Carburetor?The carburetor has a length of 2 inches, width of 1.5 inches, and height of 3.5 inches.
• What is the weight of the TOPEMAI PP5020AV Carburetor?
The carburetor weighs 0.13 pounds.
• What is the part number for the TOPEMAI PP5020AV Carburetor?
The part number for the carburetor is 573952201.
• What is the air filter part number for the TOPEMAI PP5020AV Carburetor?
The air filter part number for the carburetor is 575296301.
• How do I clean the TOPEMAI PP5020AV Carburetor?
To clean the carburetor, use a clean rag or brush to remove any dirt or debris from the outside of the carburetor. Then, use carburetor cleaner and a toothbrush or small brush to clean the inside of the carburetor.
Why We Like This
• 1. Fit for Poulan PP5020AV PP4818AV 50cc Craftsman 358350980, 358350981, 358350982 Chainsaw• 2. Replace part numbers # : 573952201; Zama C1M W47• 3. Kit comes with 575296301 Air Filter and many other accessories• 4. Good value for money, easy replacement• 5. The sizes of the 3 yellow fuel hose are respectively: ID x OD: 0080″ x 014″; ID x OD: 3/32″ x 3/16″; ID x OD: 1/8″ x 3/16″
Additional Product Information
| Height | 0.54 Inches |
| Length | 1.3 Inches |
Benefits of Carburetor For A Craftsman Chainsaw
A carburetor is an essential part of a chainsaw, and the right carburetor can make a big difference in performance. Here are some of the benefits of using the best carburetor for your chainsaw:
1. Increased power – A good carburetor will provide more power to your chainsaw, making it easier to cut through thick wood.
2. More efficient burning – A well-tuned carburetor will result in less fuel being wasted, saving you money over time.
3. Better starting – A quality carbsor will ensure that your chainsaw starts quickly and easily, every time you need it.
Buying Guide for Best Carburetor For A Craftsman Chainsaw
If you’re looking for a carburetor for your Craftsman chainsaw, you’ve come to the right place. In this buying guide, we’ll give you everything you need to know about picking the best carburetor for your chainsaw. We’ll also provide a few tips on how to keep your carburetor running smoothly.
When choosing a carburetor for your Craftsman chainsaw, it’s important to consider both quality and price. There are many different brands and models of carburetors available, so it’s important to do some research before making your purchase.
It’s also important to make sure that the carburetor you choose is compatible with your particular model of chainsaw. Some carburetors are only compatible with certain models, so be sure to check before you buy.
Once you’ve chosen the right carburetor for your chainsaw, there are a few things you can do to keep it running smoothly. First, always make sure that the air filter is clean and free of debris. A dirty air filter can restrict air flow and cause your carburetor to run less efficiently.
Also, be sure to check the spark plug regularly and replace it if necessary. A worn or damaged spark plug can also cause problems with your carburetor. If you notice any strange noises or smells coming from your chainsaw, be sure to take it to a qualified technician for service. By following these simple tips, you can keep your Craftsman chainsaw running like new for years to come!
Frequently Asked Question
What is the best carburetor for a Craftsman chainsaw?
Some popular carburetor options for Craftsman chainsaws include the Walbro WYK-33 and the Zama C1U-W8.
What are the features of the best carburetor for a Craftsman chainsaw?
A good carburetor for a Craftsman chainsaw should be able to provide a good mixture of air and fuel to the engine, and it should be easy to adjust. It should also be durable and resistant to wear and tear.
What are the benefits of using the best carburetor for a Craftsman chainsaw?
The benefits of using the best carburetor for a Craftsman chainsaw are that it will improve the saw’s performance and make it more fuel efficient.
How does the best carburetor for a Craftsman chainsaw improve performance?
The best carburetor for a Craftsman chainsaw can improve performance by allowing the engine to run at a higher speed without bogging down. It can also improve fuel economy and reduce emissions.
How easy is it to install the best carburetor for a Craftsman chainsaw?
The best carburetor for a Craftsman chainsaw is not easy to install.
Conclusion
If you’re looking for the best carburetor for a Craftsman chainsaw, then this is the one you want. It’s easy to install and adjust, and it provides the perfect mixture of air and fuel for your saw. It’s also durable and will last for years. So don’t hesitate, get this carburetor and enjoy your sawing experience for many years to come.