Why Porter Cable Band Saw Fence Is Necessary?
A band saw is a powerful tool that can cut through many different materials. However, without a proper fence, it can be difficult to get precise cuts. A good quality fence will allow you to make straight and accurate cuts, which will save you time and money in the long run.
Our Top Picks For Best Porter Cable Band Saw Fence
Best Porter Cable Band Saw Fence Guidance
Woodhaven 7280 Band Saw Fence
Woodhaven’s 7280 Band Saw Fence is an easy to adjust fence that will fit most 14″ band saws with tables up to about 16″ square. It bolts directly to existing holes in the 14″ Delta, Jet, Ridgid, Powermatic (without extension table) & Porter Cable. The fence is very rigid and has two separate fence position locks at both ends and two separate blade lead locks. It’s a great fence for cutting circles or arcs from 3″ diameter up to 189″, depending on model.
Common Questions on Woodhaven 7280 Band Saw Fence
• What is the weight of the Woodhaven 7280 Band Saw Fence?The weight of the Woodhaven 7280 Band Saw Fence is 12.5 pounds.
• What is the maximum cutting width of the Woodhaven 7280 Band Saw Fence?
The maximum cutting width of the Woodhaven 7280 Band Saw Fence is 13 inches.
• What is the minimum cutting width of the Woodhaven 7280 Band Saw Fence?
The minimum cutting width of the Woodhaven 7280 Band Saw Fence is 3/4 of an inch.
• How easy is the Woodhaven 7280 Band Saw Fence to install?
The Woodhaven 7280 Band Saw Fence is easy to install. It comes with a mounting bracket and all the necessary hardware.
• Does the Woodhaven 7280 Band Saw Fence come with a warranty?
The Woodhaven 7280 Band Saw Fence comes with a one-year warranty.
Why We Like This
• 1. The Woodhaven 7280 Band Saw Fence will improve your band saw instantly.• 2. Easy to adjust for blade lead with angle bracket design.• 3. Will fit most 14″ band saws with tables up to about 16″ square.• 4. The most rigid fence available.• 5. Lifetime guarantee against defects in material or workmanship.
Porter Cable 514007535 Miter Gauge Assembly
Common Questions on Porter Cable 514007535 Miter Gauge Assembly
Why We Like This
• 1. OEM authorized part• 2. Fits various Porter Cable models• 3. Replacement part for Porter Cable• 4. Number 514007535• 5. Made by Porter Cable
Additional Product Information
| Height | 1 Inches |
| Length | 1 Inches |
POWERTEC BS900RF Rip Fence for POWERTEC BS900 Wood Band Saw and Similar Band Saws with a Work Table Size of 11-1/8” to 11-13/16”
The POWERTEC BS900RF Rip Fence for POWERTEC BS900 Wood Band Saw and Similar Band Saws with a Work Table Size of 11-1/8” to 11-13/16” is a great addition to your band saw. Sturdy extruded aluminum construction means it’s solid and durable, while the handy adjustable cam allows for easy adjustments from 11-3/8-Inch up to 12-Inch. The simple, effective cam lever action means the fence is securely locked in place, while the 134 ounce weight makes it easy to store and move about.
Common Questions on POWERTEC BS900RF Rip Fence for POWERTEC BS900 Wood Band Saw and Similar Band Saws with a Work Table Size of 11-1/8” to 11-13/16”
• What is the RIP FENCE for?The Rip Fence is primarily used for making rip cuts on a work piece. It is used in conjunction with the band saw’s blade to make clean, precise cuts.
• How do you attach the RIP FENCE to the band saw?
The Rip Fence must be attached to the band saw before use. To do so, first loosen the two clamping screws on the fence. Then, align the fence so that the blade will cut through the center of the fence. Finally, tighten the clamping screws to secure the fence in place.
• How do you adjust the RIP FENCE?
The Rip Fence can be adjusted to accommodate different widths of material. To do so, first loosen the two clamping screws on the fence. Then, slide the fence to the desired position. Finally, tighten the clamping screws to secure the fence in place.
• What are the dimensions of the RIP FENCE?
The Rip Fence has a width of 3” and a length of 11-1/8” to 11-13/16”.
Why We Like This
Additional Product Information
| Height | 2.1 Inches |
| Length | 12.2 Inches |
| Weight | 0.64 Pounds |
Kreg KMS7200 Bandsaw Fence
One of the key things that makes a band saw a precision cutting tool is its fence. The Kreg KMS7200 bandsaw fence adjusts for perpendicularity with band saws, making them even more accurate. This fence system also adjusts to your 14-inch band saw blade’s drift angle. This means that you can make incredibly precise cuts, ensuring that your woodworking projects turn out looking their best. In addition, the fence uses a precision lens cursor for accurate measurements. Plus, the saw fence is adjustable and has T-slots for adding stops and re-saw guides. This makes it an incredibly versatile and useful tool for any woodworker.
Common Questions on Kreg KMS7200 Bandsaw Fence
• What is the Kreg KMS7200 Bandsaw Fence?The Kreg KMS7200 Bandsaw Fence is a saw fence designed to help you make straighter, more precise cuts.
• How do I install the Kreg KMS7200 Bandsaw Fence?
Installation is easy. Simply clamp the fence to your saw’s table and you’re ready to cut.
• What are the benefits of using the Kreg KMS7200 Bandsaw Fence?
The Kreg KMS7200 Bandsaw Fence helps you make straighter, more precise cuts. It’s also easy to install and use.
• How do I adjust the Kreg KMS7200 Bandsaw Fence?
Adjusting the fence is easy. Simply loosen the fence clamp and slide the fence to the desired position. Then re-tighten the clamp to secure the fence in place.
• What are the dimensions of the Kreg KMS7200 Bandsaw Fence?
The fence measures 27″ long and 3-1/2″ wide.
Why We Like This
• 1. The Kreg KMS7200 Bandsaw Fence is a premium saw accessory that allows you to adjust your 14 inch band saw blade’s drift angle for precise, accurate cuts.• 2. This table saw fence uses a precision lens cursor for accurate measurements, making it a perfect tool for any woodworking project.• 3. The Kreg KMS7200 Bandsaw Fence is also adjustable and has T slots for adding stops and re saw guides, making it a versatile tool for any home improvement project.• 4. This fence system is also low profile, making it perfect for use in tight spaces.• 5. Kreg Tools is a trusted brand for woodworkers, offering products that help close the gap between idea and outcome.
Additional Product Information
| Color | Blue |
| Height | 8 Inches |
| Length | 2.5 Inches |
| Weight | 8.7743980276 Pounds |
2 Pack Urethane Band Saw Tires – FIts 14 inch x 1 inch x .095 – No Adhesive Needed – Compatible with Branded Bandsaws Including Jet Grizzly, & Powermatic
If you’ve been searching for the best 14″ band saw tires on the market, look no further! These 2 Pack Urethane Band Saw Tires are superior to factory tires, replacement rubber or plastic tires in both quality and value.
Urethane doesn’t dry out like plastic or rubber tires, so they perform more efficiently and have a longer life expectancy. They’re also easy to install and remove without adhesive, and stretch to fit the wheel tightly.
Compatible with Jet JWBS-14DXPRO, JWBS-14CS, JWBS14OS, Grizzly G0457 G0555 G0555P G0555X G0580 T21005 G1019 G1019Z, and Powermatic PWBS-14, PWBS-14CS bandsaws that require a 14″ x 1″ x .095″ tire.
These band saw tires are the perfect solution for increased productivity and efficiency in your shop!
Common Questions on 2 Pack Urethane Band Saw Tires – FIts 14 inch x 1 inch x .095 – No Adhesive Needed – Compatible with Branded Bandsaws Including Jet Grizzly, & Powermatic
• What is the width of the 2 Pack Urethane Band Saw Tires – FIts 14 inch x 1 inch x .095 – No Adhesive Needed – Compatible with Branded Bandsaws Including Jet Grizzly, & Powermatic?The width of the 2 Pack Urethane Band Saw Tires – FIts 14 inch x 1 inch x .095 – No Adhesive Needed – Compatible with Branded Bandsaws Including Jet Grizzly, & Powermatic is 14 inches.
• What is the length of the 2 Pack Urethane Band Saw Tires – FIts 14 inch x 1 inch x .095 – No Adhesive Needed – Compatible with Branded Bandsaws Including Jet Grizzly, & Powermatic?
The length of the 2 Pack Urethane Band Saw Tires – FIts 14 inch x 1 inch x .095 – No Adhesive Needed – Compatible with Branded Bandsaws Including Jet Grizzly, & Powermatic is 1 inch.
• What is the thickness of the 2 Pack Urethane Band Saw Tires – FIts 14 inch x 1 inch x .095 – No Adhesive Needed – Compatible
Why We Like This
Additional Product Information
| Color | Orange |
Benefits of Porter Cable Band Saw Fence
When looking for a band saw, one of the main things you want to consider is the fence. A good fence will allow you to make more precise cuts and will help keep your workpiece firmly in place. The best porter cable band saw fences provide both of these benefits and more.
One benefit of a good porter cable band saw fence is that it can help you make cleaner cuts. A properly aligned fence will keep your blade perpendicular to your workpiece, which means that your cuts will be straighter and cleaner. In addition, a good fence can help prevent kickback, which can occur when the blade catches on the side of the workpiece.
Another benefit of a quality porter cable band saw fence is that it can help to extend the life of your blades. When cutting with a dull blade, you have to apply more pressure to get through tough materials. This not only puts unnecessary wear on your blades, but it also makes them more likely to break or chip during use.
Frequently Asked Question
What is the best porter cable band saw fence for your needs?
This is a difficult question to answer as it depends on a number of factors, including the specific needs of the person asking the question. Some things to consider would be the size and type of material to be cut, the frequency of use, and the budget.
What are the different types of porter cable band saw fences available?
The different types of porter cable band saw fences available are the standard, deluxe, and premium. The standard fence is the most basic and is the least expensive. The deluxe fence is more expensive and has more features, such as a dust collection port and a built-in light. The premium fence is the most expensive and has the most features, such as a fence storage system and an adjustable tensioner.
Which type of porter cable band saw fence is best for precision cuts?
In general, a porter cable band saw fence with a micro-adjust feature is going to be the best option for making precision cuts.
What is the best porter cable band saw fence for making rip cuts?
The best porter cable band saw fence for making rip cuts is the one that is adjustable. This way, you can adjust the fence to the width of the material you are cutting.
Conclusion
Thank you for your time. I hope I was able to show you how the best porter cable band saw fence can be a great addition to your home workshop. With its many features and benefits, I think it’s a worthwhile investment.