Our Top Picks For Best Bmw Eccentric Shaft Sensor
Best Bmw Eccentric Shaft Sensor Guidance
Variable Timing Eccentric Shaft Sensor 11377524879 917030 Compatible with 128i 325ixi 328ixi 330ixi 525ixi 528ixi 530ixi X3 X5 Z4 – HiSport
If your BMW 128i, 325i, 328i, 330i, 525i, 528i, 530i, X3, X5, or Z4 is having issues with its Eccentric Shaft Sensor, then this part may be the solution. The eccentric shaft is responsible for ensuring the valves in your engine open and close at the right time. If there is an issue with the sensor, it can cause the engine to run less efficiently or even stall. Replacing the sensor is a relatively simple process and can be completed in a short amount of time.
Common Questions on Variable Timing Eccentric Shaft Sensor 11377524879 917030 Compatible with 128i 325ixi 328ixi 330ixi 525ixi 528ixi 530ixi X3 X5 Z4 – HiSport
• What is the function of a Variable Timing Eccentric Shaft Sensor?The Variable Timing Eccentric Shaft Sensor is responsible for monitoring the rotational speed and position of the camshaft. It provides information to the engine control unit (ECU) so that it can adjust the timing of the engine’s fuel injection and ignition.
• What are the symptoms of a bad Variable Timing Eccentric Shaft Sensor?
A faulty Variable Timing Eccentric Shaft Sensor can cause the engine to run erratically. The engine may misfire, hesitate during acceleration, or stall unexpectedly.
• How do you test a Variable Timing Eccentric Shaft Sensor?
There are a few different ways to test a Variable Timing Eccentric Shaft Sensor. One way is to check for voltage with a multimeter at the sensor’s connector. Another way is to visually inspect the sensor for wear or damage.
• How do you replace a Variable Timing Eccentric Shaft Sensor?
Replacing a Variable Timing Eccentric Shaft Sensor is relatively straightforward. First, the old sensor is removed from its mounting location. Then, the new sensor is installed in
Why We Like This
• 1. High quality and durable• 2. 100% tested• 3. Easy to install• 4. Fitment: 2008 2013 BMW 128i, 2006 2007 BMW 325i/xi, 2007 2013 BMW 328i, 2007 2008 BMW 328xi, 2006 BMW 330i/xi, 2006 BMW 525i, 2006 2007 BMW 525xi, 2008 2011 BMW 528i, 2008 BMW 528xi, 2006 2007 BMW 530i/xi, 2007 2008 BMW X3, 2007 2008 BMW X5, 2006 2008 BMW Z4• 5. Reference number: 11377524879 / S119565001Z, 142096256253, 7524879, 11 37 7 524 879, 917 030, 917030
BMW Genuine Cylinder Gasket For Valvetronic System Eccentric Shaft Sensor
A faulty BMW eccentric shaft sensor can cause a range of problems for your vehicle, from decreased fuel economy to engine misfires. If you suspect your BMW may have an issue with its eccentric shaft sensor, it’s important to have it checked out by a professional as soon as possible. One telltale sign of a problem with this sensor is an illuminated check engine light.
The eccentric shaft sensor is located on the side of the cylinder head, near the camshaft position sensor. It monitors the position of the eccentric shaft, which is responsible for opening and closing the intake valves. When the eccentric shaft sensor fails, it can cause the intake valves to stay open longer than they should, resulting in a loss of compression and engine power. In some cases, it can also cause the engine to stall.
If you’re experiencing any of these symptoms, or if your check engine light is on, it’s important to have your BMW checked out by a professional as soon as possible. A faulty eccentric shaft sensor can lead to serious engine damage if not repaired in a timely manner.
Common Questions on BMW Genuine Cylinder Gasket For Valvetronic System Eccentric Shaft Sensor
• What is a BMW Genuine Cylinder Gasket For Valvetronic System Eccentric Shaft Sensor?The BMW Genuine Cylinder Gasket For Valvetronic System Eccentric Shaft Sensor is a gasket that is placed between the cylinder head and the engine block to provide a seal for theValvetronic system eccentric shaft sensor.
• How does the BMW Genuine Cylinder Gasket For Valvetronic System Eccentric Shaft Sensor work?
The BMW Genuine Cylinder Gasket For Valvetronic System Eccentric Shaft Sensor isresponsible for seal the oil leakage between the engine block andValvetronic system eccentric shaft sensor.
• When should I replace my BMW Genuine Cylinder Gasket For Valvetronic System Eccentric Shaft Sensor?
You should replace your BMW Genuine Cylinder Gasket For Valvetronic System Eccentric Shaft Sensor every 50,000 miles.
Why We Like This
• • 1. Genuine BMW part for a perfect fit• 2. Seals the Valvetronic system eccentric shaft sensor• 3. Made of high quality materials for durability• 4. Easy to install• 5. Backed by BMW’s quality assurance
Additional Product Information
| Color | multi |
| Weight | 0.125 Pounds |
OEM Valvetronic Eccentric Shaft Sensor (Engine Variable Timing Eccentric) for BMW
Common Questions on OEM Valvetronic Eccentric Shaft Sensor (Engine Variable Timing Eccentric) for BMW
• What is the OEM Valvetronic Eccentric Shaft Sensor?The OEM Valvetronic Eccentric Shaft Sensor is a sensor that is used to monitor the position of the Valvetronic eccentric shaft.
• What are the benefits of the OEM Valvetronic Eccentric Shaft Sensor?
The benefits of the OEM Valvetronic Eccentric Shaft Sensor include improved fuel economy, reduced emissions, and improved engine performance.
• What are the symptoms of a failing OEM Valvetronic Eccentric Shaft Sensor?
Symptoms of a failing OEM Valvetronic Eccentric Shaft Sensor can include engine misfires, poor fuel economy, and increased emission.
• How do I know if my OEM Valvetronic Eccentric Shaft Sensor needs to be replaced?
If you experience any of the symptoms associated with a failing OEM Valvetronic Eccentric Shaft Sensor, it is recommended that you have the sensor replaced.
Why We Like This
• • 1. OEM quality• 2. Engineered for superior fitment and function• 3. Easy installation• 4. Ensures proper engine timing• 5. Backed by a manufacturer’s warranty
Dorman 917-030 Eccentric Shaft Sensor Compatible with Select BMW Models (OE FIX)
Dorman’s eccentric shaft sensor is a direct replacement for your BMW model years 2007-2013. The upgraded design features ultrasonic welds to increase durability and prevent common failures from oil intrusion in original equipment spot welds. Application specific, this sensor is made in the USA and backed by decades of automotive aftermarket experience.
Common Questions on Dorman 917-030 Eccentric Shaft Sensor Compatible with Select BMW Models (OE FIX)
• What is the part number for the eccentric shaft sensor compatible with select BMW models?The part number is 917-030.
• What is the function of the eccentric shaft sensor?
The eccentric shaft sensor is responsible for monitoring the rotational position and speed of the engine crankshaft.
• What are the symptoms of a failing eccentric shaft sensor?
Symptoms of a failing eccentric shaft sensor can include engine misfires, stalling, and reduced engine power.
• How do you know if you need to replace your eccentric shaft sensor?
You may need to replace your eccentric shaft sensor if your engine is experiencing any of the previously mentioned symptoms. Additionally, a failed sensor may throw a diagnostic trouble code (DTC).
Why We Like This
• 1. Upgraded design for increased durability• 2. Failure resistant construction• 3. Application specific• 4. Quality engineering• 5. Ensure fit
Additional Product Information
| Height | 2.56 Inches |
| Length | 3.94 Inches |
| Weight | 0.1 Pounds |
11377524879 Eccentric Shaft Sensor Valvetronic for 2006-2011 BM-W E60 E90 E83 128i 325i 328i 525i 528xi 530i X3 X5 Z4 Part#S119565001Z 142096256253 917-030
The eccentric shaft position sensor is responsible for monitoring the position of the eccentric shaft, which in turn controls the intake valve lift of the engine. This sensor is mounted to the cylinder head beneath the valve cover and is sealed by a rubber gasket. The top of the sensor protrudes up through the valve cover and is connected to the engine control unit (ECU) via an electrical connector.
The eccentric shaft sensor can fail due to oil leaks at the top front of the valve cover. This can cause the sensor to become coated in oil, which can lead to false readings or intermittent signals. In some cases, the connector itself may become corroded or damaged.
Symptoms of a faulty eccentric shaft sensor include engine misfires, hesitation during acceleration, and increased fuel consumption. In some cases, the engine may not start at all.
If you suspect that your eccentric shaft sensor is failing, it is important to have it inspected and replaced by a qualified technician as soon as possible.
Common Questions on 11377524879 Eccentric Shaft Sensor Valvetronic for 2006-2011 BM-W E60 E90 E83 128i 325i 328i 525i 528xi 530i X3 X5 Z4 Part#S119565001Z 142096256253 917-030
• What is the function of the eccentric shaft sensor in the BM-W engine?The eccentric shaft sensor is responsible for monitoring the position and rotational speed of the eccentric shaft. This information is used by the engine control unit to regulate the intake and exhaust valve timing.
• What are the symptoms of a problem with the eccentric shaft sensor?
The most common symptom of a problem with the eccentric shaft sensor is increased fuel consumption. Other symptoms may include misfires, hard starting, or uneven idling.
• How does the eccentric shaft sensor work?
The eccentric shaft sensor consists of a magnet and a Hall effect sensor. As the eccentric shaft turns, the magnet turns with it. The magnetic field created by the magnet interacts with the Hall effect sensor, which produces a signal that is proportional to the speed and position of the shaft.
Why We Like This
Additional Product Information
| Height | 1.181102361 Inches |
| Length | 1.968503935 Inches |
Benefits of Bmw Eccentric Shaft Sensor
If your BMW is equipped with an M54 or M56 engine, it likely has an eccentric shaft sensor. The purpose of this sensor is to monitor the position of the eccentric shaft, which controls the intake valves. In early versions of these engines, the sensors were known to fail prematurely.
However, newer versions of the BMW eccentric shaft sensor are much more reliable and can last for years without issue. Even if yours doesn’t fail completely, it could become less accurate over time and eventually need to be replaced.
The main benefit of replacing your BMW’s eccentric shaft sensor is improved engine performance. A failing or faulty sensor can cause a number of problems, including decrease in power and fuel efficiency as well as increased emissions levels. Replacing the sensor will help ensure that your engine runs at peak performance levels again.
Buying Guide for Best Bmw Eccentric Shaft Sensor
The BMW eccentric shaft sensor is located on the side of the engine, near the oil filter. It monitors the rotation of the crankshaft and sends a signal to the control unit when it detects an anomaly.
If your car is displaying any of the following symptoms, it may be time to replace your eccentric shaft sensor:
-Engine misfire
-Rough idle
-Check Engine Light is on
-Experiencing decreased fuel economy
When shopping for a new eccentric shaft sensor, make sure to buy one that is compatible with your specific BMW model. You will also need to purchase a new gasket and O-ring seal for installation.
Frequently Asked Question
What are the best BMW eccentric shaft sensors on the market?
There are a few different types of eccentric shaft sensors on the market for BMW vehicles. Some of the best ones are made by Bosch, Delphi, and Hella. These sensors are designed to work with a variety of BMW models and can provide accurate and reliable readings.
What are the features of a good BMW eccentric shaft sensor?
There are a few key features that make a good BMW eccentric shaft sensor. Firstly, it should be made from high-quality materials that can withstand the high temperatures and stress of the engine. Secondly, it should be designed to be durable and have a long lifespan. Lastly, it should be easy to install and maintain.
How does a BMW eccentric shaft sensor work?
The eccentric shaft sensor is used to monitor the position and rotational speed of the eccentric shaft. This information is used by the engine control unit to adjust the timing of the engine’s valves.
How do I know if my BMW eccentric shaft sensor is working properly?
If your BMW eccentric shaft sensor is not working properly, your car will not start.
Conclusion
Thank you for your time. I hope I have convinced you that the best bmw eccentric shaft sensor is the right choice for you. This product will make your life easier and save you money in the long run.