Why Temperature Sensor For Ge Oven Is Necessary?
A temperature sensor is necessary for a ge oven because it helps to regulate the temperature inside the oven. The sensor monitors the air temperature and sends a signal to the control panel. The control panel then adjuststhe heating element to maintain the pre-set temperature.
Our Top Picks For Best Temperature Sensor For Ge Oven
Best Temperature Sensor For Ge Oven Guidance
GE WB23T10015 Range/Stove/Oven Sensor
Your GE range is equipped with a WB23T10015 range/stove/oven sensor, which monitors the oven temperature and sends signals to the electronic oven control to maintain proper cooking temperature. This sensor probe is approximately 10-1/2 inches long. The Connector Type on this sensor is a Spade, the male terminals on this probe are 2.8mm in diameter. If your oven is not maintaining temperatures properly, or the oven is too hot or too cold, you may need to replace the sensor.
Common Questions on GE WB23T10015 Range/Stove/Oven Sensor
• What is the range of this sensor?The temperature range is 150 to 500 degrees F.
• What is included with the sensor?
The oven sensor comes with a wire harness and instructions.
• Is this sensor oven-safe?
Yes, the GE WB23T10015 Range/Stove/Oven Sensor is oven-safe.
• Can I install this sensor myself?
Installation instructions are included with the sensor, and most people find it easy to install themselves.
Why We Like This
• 1. This is a genuine replacement part from General Electric.• 2. The part is designed for use with a range or stove.• 3. It helps to ensure proper cooking temperatures.• 4. The sensor is easy to install.• 5. It is made in China.
Additional Product Information
| Height | 1.7 Inches |
| Length | 8 Inches |
GE WB20K10027 Range Oven Temperature Sensor
The GE WB20K10027 Range Oven Temperature Sensor is a high-quality, OEM sensor that is designed to measure the temperature inside your oven with precision. It is a genuine GE part that is compatible with many Hotpoint ranges, and it is easy to install. With this sensor, you can be confident that your oven is functioning properly and that your food will be cooked evenly.
Common Questions on GE WB20K10027 Range Oven Temperature Sensor
• How to change GE oven temperature sensor?You can change your GE oven’s temperature sensor by first finding the sensor itself. Once you have found the sensor, you will need to remove the old sensor and then install the new one.
Why We Like This
• 1. Manufactured to exact specifications• 2. High quality materials• 3. Original GE part• 4. Measures oven temperature• 5. Fits some Hotpoint ranges
Additional Product Information
| Height | 1 Inches |
| Length | 1 Inches |
GE WB21X22134 Sensor Assembly
This genuine GE OEM part is a sensor assembly forGE ovens. It is compatible with various GE models and is simple to install following the included instructions. This part is essential for monitoring and maintaining optimaloven temperature, ensuring consistent and delicious results with every meal.
Common Questions on GE WB21X22134 Sensor Assembly
• What is the GE WB21X22134 Sensor Assembly?The GE WB21X22134 Sensor Assembly is a part for a range. It is the sensing unit that detects heat in the cooktop.
• Where is the GE WB21X22134 Sensor Assembly located?
The GE WB21X22134 Sensor Assembly is located in the cooktop.
• What are the dimensions of the GE WB21X22134 Sensor Assembly?
The GE WB21X22134 Sensor Assembly is 2.5″ x 2.5″.
• What is the function of the GE WB21X22134 Sensor Assembly?
The GE WB21X22134 Sensor Assembly is the sensing unit that detects heat in the cooktop.
• What is the material of the GE WB21X22134 Sensor Assembly?
The GE WB21X22134 Sensor Assembly is made of metal.
Why We Like This
1. GE WB21X22134 Sensor Assembly is a genuine GE OEM part.
2. Compatible with various GE (General Electric) models.
3. This Sensor Assembly, # WB21X22134, is for GE ovens.
4. Follow the instructions in the owner’s manual when installing this part.
5. This part is backed by a 1 Year Manufacturer Warranty.
Additional Product Information
| Height | 3.5 Inches |
| Length | 1 Inches |
| Weight | 0.03 Pounds |
PART # WB21T10007 OR AP3192829 GENUINE FACTORY OEM ORIGINAL STOVE OVEN RANGE TEMPERATURE SENSOR FOR GE AND HOTPOINT : REPLACES PS235505, WB21T10017
A oven temperature sensor monitors the oven temperature and sends the reading to the control board. The control board uses the sensor reading to regulate the oven temperature. If the oven temperature sensor is defective, the oven may not reach the correct temperature. This can cause the oven to underheat or overheat.
Common Questions on PART # WB21T10007 OR AP3192829 GENUINE FACTORY OEM ORIGINAL STOVE OVEN RANGE TEMPERATURE SENSOR FOR GE AND HOTPOINT : REPLACES PS235505, WB21T10017
• Does this part fit my model?Please enter your model number in the field provided on the product page to see if this part is compatible with your model.
• What is the function of this part?
The function of this part is to monitor and regulate the temperature within your oven.
• Is this a genuine GE/Hotpoint part?
Yes, this is a genuine GE/Hotpoint OEM part.
Why We Like This
• 1. Replaces PS235505, WB21T10017• 2. Genuine Factory OEM Original• 3. For proper fit, easy installation and reliability• 4. Part Number WB21T10007 (AP3192829)• 5. Replaces 911001, AH235505, EA235505, PS235505, WB21T10017, WB21T10007, WB21T10017
Additional Product Information
| Height | 3.5 Inches |
| Length | 1.5 Inches |
12001656 for GE WB21X5301 Oven Sensor Temperature Sensor PS236043 AP2023670
Your oven is one of the most important appliances in your home, so when it breaks down, it can be a real pain. Fortunately, we offer a wide range of replacement parts for all major brands, including this GE WB21X5301 oven sensor temperature sensor.
This part is designed to measure the internal temperature of your oven and relay that information to the control panel. If the sensor is damaged or malfunctioning, it can cause the oven to overheat or not heat evenly, which can ruin your food.
Installing this sensor is a relatively easy job that most people can do themselves with just a few tools. However, if you’re not confident in your ability to do the job, we recommend calling a professional.
We offer a wide range of appliance parts for all major brands, so if you need any other parts for your oven, refrigerator, dishwasher, or any other appliance, we’ve got you covered.
Common Questions on 12001656 for GE WB21X5301 Oven Sensor Temperature Sensor PS236043 AP2023670
• Is this oven sensor compatible with my stove?The GE WB21X5301 Oven Sensor is compatible with select models of GE, Hotpoint, and Kenmore/Sears stoves.
• Where is the oven sensor located?
The oven sensor is located in the oven, near the back wall.
• How do I know if my oven sensor is faulty?
One way to test whether your oven sensor is faulty is to use an oven thermometer. If the oven sensor is working correctly, the oven thermometer should read the same temperature as the oven. If the readings differ, the oven sensor may be faulty.
• Can I replaces the oven sensor myself?
Yes, you can replace the oven sensor yourself. However, it is recommended that you consult an appliance repair technician to ensure that the sensor is installed correctly.
• What are the symptoms of a faulty oven sensor?
A faulty oven sensor can cause the oven to overheat or fail to reach the correct temperature. Additionally, the oven may cycle on and off or the stovetop may malfunction.
Why We Like This
• 1. Replaces the following part numbers: WB08K5007, WB20K0004, WB20K4, WB20X0106, WB20X106, WB21X5263, WB21X5275, WB21X5296, WB21X5318, WB21X5321, WB21X5347, WB8K5007 PS1570174, 04000052, 04100258, 12001357, 12001554, 12001656VP, 12500029, 1364, 704657, 71003083, 74003390, 74004471, 74004943, 74005193, 7430P003 60, 7430P005 60, 7430P008 60, 7430P008 60K, 7430P010 60, 7430P042 60, 7 4657, 8189679, 879368, AP4009009, W10127323, Y04000052, Y04100258, Y704657.• 2. Made from durable high quality material and well tested by the manufacturer Meet OEM standards Ensure long lasting and effective operation.• 3. This
Benefits of Temperature Sensor For Ge Oven
There are many benefits of using the best temperature sensor for ge ovens. One benefit is that it can help you save money on your energy bill. By monitoring the temperature in your oven, you can make sure that it’s not set too high or low and wasting energy.
Another benefit is that it can help to prolong the life of your appliance by keeping the temperatures consistent. This means that overeating or under-cooking won’t ruin your food, and you’ll be able to use your oven for longer without having to worry about replacing it prematurely.
Finally, a good temperature sensor will also provide safety features such as an automatic shut-off if there is a fire risk present. This way, you won’t have to worry about losing control of your cooking environment and potentially causing a disaster.
Buying Guide for Best Temperature Sensor For Ge Oven
When trying to find the perfect temperature sensor for your GE oven, keep in mind a few things. The size of the sensor is important because you want it to fit snugly in the oven. You also need to make sure that the sensor can handle high temperatures. GE ovens can get very hot, so you’ll need a sensor that can withstand those temperatures. Finally, take a look at reviews to see what other people have said about different models. That way, you can get an idea of which ones are best for your needs
Frequently Asked Question
What is the best temperature sensor for ge oven?
Some general tips for choosing a temperature sensor for a ge oven include checking the reviews of various sensors to see which ones are most popular and have the best ratings, as well as consulting with a qualified appliance repair technician to ensure that the sensor you choose is compatible with your particular oven model.
How does the sensor work?
When the water level in the tank drops below the level of the sensor, the sensor sends a signal to the pump to turn on.
What are the benefits of using a sensor?
Some benefits of using sensors include being able to detect and respond to changes in the environment, conserve energy by only activating when needed, and improve safety by providing early warnings of potential hazards.
How can I improve the accuracy of my oven temperature sensor?
There are a few things you can do to improve the accuracy of your oven temperature sensor: 1. Check the sensor for any dirt or debris that could be affecting its readings. 2. Make sure the sensor is properly calibrated. 3. If the sensor is still inaccurate, you may need to replace it.
What is the difference between a sensor and a thermostat?
A sensor is a device that detects or measures a physical property and records, indicates, or otherwise responds to it. A thermostat is a device for maintaining a desired temperature by controlling the operation of a heating or cooling system.
Conclusion
If you are in the market for a reliable and accurate oven temperature sensor, then the GE oven sensor is the perfect option for you. With its superior accuracy, this sensor will help ensure that your food is cooked perfectly every time. Additionally, its easy installation and user-friendly design make it a great choice for any home cook.