The most common type of torsion spring winding bar is made from steel. Steel winding bars are very strong and durable, making them ideal for use in heavy-duty applications. However, they can be quite difficult to work with if you’re not experienced in using them. If you’re looking for an easier to use torsion spring winding bar, you might want to consider one made from aluminum. Aluminum winding bars are much lighter in weight than steel bars, making them easier to maneuver. They’re also less likely to damage your springs when Winding them.
When choosing a torsion spring winding bar, you also need to consider its length. The shorter the bar, the less leverage you’ll have when Winding your springs. If you’re working with small springs, you might want to choose a shorter bar so that you don’t have to put as much force on the bar when Winding. Conversely, if you’re working with large springs, you’ll need a longer bar so that you can apply more force.
Finally, you need to consider the width of the torsion spring winding bar when making your selection. The wider the bar, the more contact area it will have with your springs. This means that it will be able to distribute the force more evenly, making it less likely to damage your springs. When choosing a width, keep in mind that wider bars are usually more expensive than narrower ones.
Why Torsion Spring Winding Bars Is Necessary?
Torsion spring winding bars are necessary to ensure that the tension in a torsion spring is uniform throughout its length. If the tension in a torsion spring is not uniform, it can cause the spring to fail prematurely. Tensioning a torsion spring too tightly can also cause it to fail prematurely.
Our Top Picks For Best Torsion Spring Winding Bars
Best Torsion Spring Winding Bars Guidance
![2 Pack 18 Inch Winding Rods for Torsion Springs, 0.5inch Diameter Steel Winding Bars for Adjusting or Replacing Garage Door Tension Springs with Rubber Handle](https://m.media-amazon.com/images/I/41H+w7eCTjL._SL500_.jpg)
The pair of torsion spring winding rods are specifically designed for increasing (winding) and decreasing (unwinding) the tension on residential garage door torsion springs. This is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door. Failure to use these rods when replacing or adjusting torsion springs may result in personal injury and property damage.
The dimensions of the garage door torsion spring winding rod are 047inch in outside diameter and 177” long. They are designed to industry standard for residential garage door use, and fit most residential winding cones.
Wind the spring by inserting therod through the winding cone hole in the shoe. Apply firm pressure tothe rod as you wind. Do not over-wind the spring – stop when the spring is tight. Insert anotherrod into the other hole. Continue winding until you have the desired number of turns onthe spring.
Use the winding bars to loosen the spring by inserting each bar into a winding cone hole andturning it counter-clockwise until the spring is loose. Be careful not to overtighten or loosen thespring too much – this can cause the door to become unbalanced and unsafe.
Common Questions on 2 Pack 18 Inch Winding Rods for Torsion Springs, 0.5inch Diameter Steel Winding Bars for Adjusting or Replacing Garage Door Tension Springs with Rubber Handle
• How do I know if my garage door torsion springs need to be replaced?One way to tell if your garage door torsion springs need to be replaced is if they are making noise when the door is opened or closed. Another way to tell is if the door is not opening or closing as smoothly as it used to. If you are unsure, you can always contact a professional to take a look.
• How do I replace my garage door torsion springs?
To replace your garage door torsion springs, you will need to purchase new springs and wound rods. You will also need to disconnect the old springs from the door. Once you have the new springs in place, you will need to wind them tight. Finally, you will need to reattach the springs to the door.
• What are the consequences of not replacing my garage door torsion springs?
If you do not replace your garage door torsion springs, the door could come crashing down. This could cause serious injury or even death. It is always best to contact a professional if you are unsure about replacing the springs yourself.
Why We Like This
• 1. The pair of torsion spring winding rods are specifically designed for increasing (winding) and decreasing (unwinding) the tension on residential garage door torsion springs.• 2. Torsion Spring Winding Rods is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door.• 3. Garage door torsion spring winding rod are 047inch in outside diameter and 177” long.• 4. Steel torsion rods allow you to safely perform torsion spring replacements and adjustments without worrying about keeping the spring tension under control.• 5. These rods are designed to industry standard for residential garage door use, fit most residential winding cones.
Additional Product Information
Color | Silver |
![ZhenT Premium 2Pcs Winding Bars with Non-Slip Handle 1/2’’ in Diameter X 17.5’’ in Length,Used for Garage Door Torsion Spring](https://m.media-amazon.com/images/I/21Wd6U6p-PL._SL500_.jpg)
Looking for an easy and affordable way to wind or unwind the tension on torsion springs? Look no further than the ZhenT Premium 2Pcs Winding Bars! These top-quality bars are made of heat treated 45 steel for maximum durability, and feature a non-slip knurled handle for safe and easy operation. Plus, the zinc-plated surface resists rust and corrosion, making these bars a long-lasting addition to your garage door toolkit. Best of all, one end of each bar is colored red, so you can easily keep track of which bar is inserted to the full depth. Each bar measures 1/2″ in diameter x 17.5″ in length and weighs just 1 lb. Order your set today and save yourself a trip (and a hefty bill) from the garage door company!
Common Questions on ZhenT Premium 2Pcs Winding Bars with Non-Slip Handle 1/2’’ in Diameter X 17.5’’ in Length,Used for Garage Door Torsion Spring
• What are the dimensions of the product?The product is 1/2’’ in diameter and 17.5’’ in length.
• What is the product made from?
The product is made from high-quality steel.
• What is the product used for?
The product is used for winding garage door torsion springs.
• How do you use the product?
You use the product by inserting it into the winding cone of the torsion spring and turning it in the direction of the wind. Repeat this process five times with unique values.
Why We Like This
• Made of heat treated 45 steel for durability• Non slip handle for safety and control• Zinc plated surface is resistant to rust• Red end indicates when bar is fully inserted• Diameter: 1/2″ In x Length: 175″ In
Additional Product Information
Color | Original version |
Height | 0.47 Inches |
Length | 17.4 Inches |
Weight | 2 Pounds |
![1 Pair Torsion Spring Winding Rods with Non-Slip Handle, 16 Inch Length Winding Bars for Adjusting or Replacing Garage Door Torsion Springs, 12mm Diameter Round Steel Rods](https://m.media-amazon.com/images/I/31aCujdGMJL._SL500_.jpg)
Torsion spring winding rods are an essential tool for adjusting or replacing garage door torsion springs. These rods are made of strong steel and are designed to industry standards for residential garage doors. They are equipped with a black non-slip rubber handle, which allows you to better control and use them comfortably and safely.
Package includes:
1 pair winding rods
Dimensions:
16” (L) x 0.47” (Dia)
Common Questions on 1 Pair Torsion Spring Winding Rods with Non-Slip Handle, 16 Inch Length Winding Bars for Adjusting or Replacing Garage Door Torsion Springs, 12mm Diameter Round Steel Rods
• What is the lowest weight in pounds that this product can support?This product can support a range of weights, but the lowest weight it can support specifically is 15 pounds.
• What is the length of the spring rods?
The spring rods are 16 inches in length.
• What is the diameter of the steel rods?
The steel rods have a diameter of 12mm.
Why We Like This
• 1. Torsion spring winding rods are designed for wind or unwind torsion spring• 2. This is an indispensable tool for adjusting the torsion spring to keep balance the weight of a garage door and avoid possible injuries• 3. Winding bars are equipped with a black non slip rubber handle, which allows you to better control and use them comfortably and safely• 4. Made of strong steel, more durable• 5. Designed to industry standards for residential garage doors
![2 Packs of Winding Rods with Non-Slip Rubber Handle for Torsion Springs/Solid Steel Metal Winding Bars Hardware for Adjusting or Replacing Garage Door Tension Springs (16](https://m.media-amazon.com/images/I/31LzVPtMS7L._SL500_.jpg)
If you’re attempting to replace or adjust the tension on your garage door torsion springs, you’ll need to use a pair of winding rods to safely keep the spring tension under control. Steel winding rods are specifically designed for this purpose, and are the only type of tool that should be used for the job.
Each rod is 0.47 inches in diameter and 16 inches long, making them the perfect size for most residential garage doors. The rods also have non-slip rubber handles to make them more comfortable and safe to use. Following the manufacturer’s instructions carefully is extremely important when making any changes to your garage door torsion springs, and using the proper tools is an essential part of the process.
Common Questions on 2 Packs of Winding Rods with Non-Slip Rubber Handle for Torsion Springs/Solid Steel Metal Winding Bars Hardware for Adjusting or Replacing Garage Door Tension Springs (16″ Length, 0.47” Dia.)
• What are the dimensions of the product?16″ length, 0.47” diameter
• What is the purpose of the product?
The product is used for adjusting or replacing garage door tension springs.
• What is the material of the product?
The product is made of solid steel metal.
• How many winding rods are included in each pack?
There are 2 winding rods in each pack.
Why We Like This
• 1. The pair of torsion spring winding rods are specifically designed for winding and unwinding the tension on residential garage door torsion springs.• 2. Our winding rod has non slip rubber handle to make it more comfortable and safe to use.• 3. Garage door torsion spring winding rods are 047 inch in outside diameter and 16 inch long.• 4. Torsion Spring Winding Rods is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door.• 5. Steel torsion rods allow you to safely perform torsion spring replacements and adjustments without worrying about keeping the spring tension under control.
Additional Product Information
Height | 0.5 Inches |
Length | 18 Inches |
Weight | 1.8 Pounds |
![18](https://m.media-amazon.com/images/I/31LUDGRJS6L._SL500_.jpg)
If you have a garage door torsion spring that needs adjustment, you’ll need a winding bar. Also called a torsion bar or torque bar, a winding bar is a solid steel rod that helps you wind and unwind the garage door torsion spring so you can make the necessary adjustments.
While there are different sizes of winding bars available, 18″ is a common size. That’s because it’s long enough to provide the leverage you need to make tension adjustments, but not so long that it’s unwieldy.
When using a winding bar, always take care to avoid injuring yourself or damaging the garage door. In particular, be careful not to drop the winding bar, as it can cause serious injury if it hits someone. Also, be careful not to overextend the winding bar, as this can put too much tension on the torsion spring and cause it to break.
Common Questions on 18″ Garage Door Torsion Spring Winding Bars
• How do you adjust a torsion spring winder?By turning the winding bars to the right or left.
• What is the tension on a torsion spring called?
The tension is referred to as “torque” and is measured in pounds per square inch.
• How do you know when a torsion spring is fully wound?
When the winding bars can no longer be turned, the spring is fully wound.
Why We Like This
• Made of solid steel metal for durability• Can be used to make torsion spring adjustments to balance the weight of a garage door• 18″ length• Comes as a set of two• Can be used with any size garage door
Benefits of Torsion Spring Winding Bars
Torsion spring winding bars offer many benefits to users, including the following:
1. They provide a convenient way to wind torsion springs.
2. They allow for consistent tension when winding torsion springs.
3. Tension can be easily adjusted with winding bars, making them perfect for adjusting the level of tension in a torsion spring without having to disassemble the entire spring assembly.
Buying Guide for Best Torsion Spring Winding Bars
When shopping for the best torsion spring winding bars, you will want to consider the following factors:
-Size: Torsion spring winding bars come in a variety of sizes. Be sure to select one that is compatible with your torsion springs.
-Material: Torsion spring winding bars are typically made from steel or another durable material. Select a bar that can withstand heavy use.
-Handle: Look for a torsion spring winding bar with a comfortable handle. This will make it easier to grip and wind the bar.
-Price: Torsion spring winding bars vary in price depending on their size, material, and features. Compare prices to find the best value for your needs.
Frequently Asked Question
What is the best torsion spring winding bar?
Some factors to consider when choosing a torsion spring winding bar include the material (e.g. steel, aluminum, etc.), length, and diameter.
How do I choose a torsion spring winding bar?
There is no definitive answer, but there are a few factors to consider when choosing a torsion spring winding bar. The first is the size of the spring – the larger the spring, the thicker the bar should be. The second is the amount of force required to wind the spring – a heavier bar will be needed for a spring with a higher tension. Finally, the length of the bar is also a factor – a longer bar will be needed for a spring with a larger coil diameter.
What are the different types of torsion spring winding bars?
There are three different types of torsion spring winding bars: 1. Straight winding bars: These are the most common type of winding bars and are used for winding springs with a uniform diameter. 2. Tapered winding bars: These are used for winding springs with a tapered diameter. 3. Offset winding bars: These are used for winding springs with an offset center.
What are the benefits of using a torsion spring winding bar?
Using a torsion spring winding bar has a number of benefits. It allows you to wind the spring with less effort, and it also prevents the spring from unwinding while you are working on it.
What are the disadvantages of using a torsion spring winding bar?
There are several disadvantages to using a torsion spring winding bar: 1. Torsion springs are under a lot of tension and can be dangerous to work with. 2. If the winding bar is not inserted properly, it can damage the spring. 3. Inserting the winding bar can be difficult and time-consuming. 4. If the winding bar is not removed properly, it can cause the spring to unwind and possibly cause injury.
Conclusion
If you’re looking for the best torsion spring winding bars on the market, look no further than ours. Our bars are made of high-quality materials and are designed to last. With our bars, you’ll be able to quickly and easily wind your springs, making your life a lot easier.