The most common type of toggle switch is a single pole, double throw (SPDT) switch. This type of switch has three terminals, two at the bottom which are called ” input” or “COM” (for common), and one at the top which is called “output” or “NC” (for normally closed). The top terminal is where you would wire your LED light bar’s power wire to. The LED light bar will only receive power when the switch is turned ON, otherwise it will be OFF. The other two terminals at the bottom are used for other accessories such as an LED work light orExhaust Brake. These can be wired to come ON with the LED light bar, or they can be wired independently so they can be turned ON without the LED light bar being ON.
Another type of toggle switch used frequently is a double pole, double throw (DPDT) switch. This type of switch has six terminals, three on each side. The left side is where you would wire your LED light bar’s power wire to just like on a SPDT switch. The right side is used for other accessories as well, but with a DPDT switch you have the option of wiring them in what’s called a “piggyback” configuration. This means that both sets of accessories will come ON when theswitch is turned ON, but they can also be turned ON independently of each other by flipping the switch in the opposite direction. This can be useful if you want your work lights to come ON with your LED light bar but want to be able to turn them OFF without affecting your brake lights for example.
There are also rocker style switches available which can give your project a more finished look. These types of switches come in both SPDT and DPDT varieties and function exactly the same as their toggle counterparts.
Why Light Bar Toggle Switch Is Necessary?
Light bars are very useful in a variety of settings and can improve visibility and safety. However, they can also be very inconvenient if they are not turned off when not needed. A toggle switch is the best way to ensure that your light bar is turned off when it is not needed, and it is also much more convenient than having to fumble around with a traditional switch.
Our Top Picks For Best Light Bar Toggle Switch
Best Light Bar Toggle Switch Guidance
Nilight – 90001B LED Light Bar Rocker Switch 5Pin Laser On/Off LED Light 20A/12V 10A/24V Switch Jumper Wires Set for Jeep Boat Trucks,2 Years Warranty
If you’re looking for a simple and effective way to control your LED light bar, then you need a rocker switch. And the Nilight 90001B LED Light Bar Rocker Switch is just the thing for the job. This 5 pin switch is rated at 20amp/12v and 10amp/24v, making it perfect for controlling a variety of lights. Plus, it comes with a jumper wires set and a diagram, so you can easily install it on your own.
Common Questions on Nilight – 90001B LED Light Bar Rocker Switch 5Pin Laser On/Off LED Light 20A/12V 10A/24V Switch Jumper Wires Set for Jeep Boat Trucks,2 Years Warranty
• What is the Nilight – 90001B LED Light Bar Rocker Switch?The Nilight – 90001B LED Light Bar Rocker Switch is a 5-pin laser on/off LED light switch that is rated for 20A/12V and 10A/24V.
• How do you install the Nilight – 90001B LED Light Bar Rocker Switch?
The Nilight – 90001B LED Light Bar Rocker Switch can be installed easily by jumper wires.
• What are the dimensions of the Nilight – 90001B LED Light Bar Rocker Switch?
The dimensions of the Nilight – 90001B LED Light Bar Rocker Switch are 3.54 in x 1.97 in x 1.38 in.
• What is the weight of the Nilight – 90001B LED Light Bar Rocker Switch?
The weight of the Nilight – 90001B LED Light Bar Rocker Switch is 3.2 oz.
• What is the warranty period for the Nilight – 90001B LED Light Bar Rocker Switch?
The warranty period for the Nilight – 90001B LED
Why We Like This
• 5 pin on off rocker switch with SPST design• Built in two premium LEDs• Sturdy and durable• Wide application• Package includes: 1x 5 Pin Rocker Switch, 1x jumper wires set, 1x Diagram
Additional Product Information
| Color | Blue |
| Height | 0.393700787 Inches |
| Length | 0.787401574 Inches |
| Weight | 0.03 Pounds |
LED Light Bar Rocker Switch for Can-Am Commander Max Maverick x3 Defender Polaris Ranger RZR 4 XP 800 900 1000 ATV UTV Toggle Switch 3 Pin UTV ON-Off 20A/12V LED Light Bar Carling Rocker Switches
A LED light bar rocker switch is a great way to easily control your LED light bar. With a simple on and off operation, this switch is easy to use and can help you save energy and extend the life of your LEDs. This switch is also easy to install, and will perfectly match the existing OEM switches in your vehicle. For multiple switch replacement, such as LED light bars, fog lamps, rear lights or auxiliary lamps, this switch is a great choice.
Common Questions on LED Light Bar Rocker Switch for Can-Am Commander Max Maverick x3 Defender Polaris Ranger RZR 4 XP 800 900 1000 ATV UTV Toggle Switch 3 Pin UTV ON-Off 20A/12V LED Light Bar Carling Rocker Switches
• What is the power output of this LED light bar rocker switch?The power output of this LED light bar rocker switch is 20A/12V.
• What is the voltage range of this LED light bar rocker switch?
The voltage range of this LED light bar rocker switch is 3 Pin UTV ON-Off.
• How many switches are included in this LED light bar rocker switch?
There are three switches included in this LED light bar rocker switch.
Why We Like This
• 3 Pin on off toggle rocker switch is suitable for UTV such as Can Am Maverick Commander, Polaris Ranger RZR• LED light bar rocker switch 12v is easy to install and will perfectly match the existing OEM switches, which can help you turn on or turn off the led light easily• For multiple switch replacement, such as led light bar, fog lamp, rear light or auxiliary lamps switch, etc• Lower LED is independent and can be wired to separate dash light circuit• 100% test before shipping
Additional Product Information
| Height | 1.968503935 Inches |
| Length | 6.4960629855 Inches |
MICTUNING MIC-LSB1 Laser LED Light Bar Rocker Switch ON-Off LED Light 20A 12V, 5pin, Blue
MICTUNING MIC-LSB1 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights. PERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark. STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability. WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc.
The MICTUNING MIC-LSB1 5 Pin on-off Rocker Switch is a great way to easily control various lights on your car or truck. The switch comes with a set of jumper wires, making installation a breeze, and the handy LED light lets you know when the switch is on or off. The
Common Questions on MICTUNING MIC-LSB1 Laser LED Light Bar Rocker Switch ON-Off LED Light 20A 12V, 5pin, Blue
• What are the dimensions of the MICTUNING MIC-LSB1 rocker switch?The MICTUNING MIC-LSB1 rocker switch is 2” x 1” x 0.4”.
• What is the voltage and amperage rating of the MICTUNING MIC-LSB1 rocker switch?
The MICTUNING MIC-LSB1 rocker switch is rated for 20A at 12V.
• How many pins does the MICTUNING MIC-LSB1 rocker switch have?
The MICTUNING MIC-LSB1 rocker switch has 5 pins.
• What is the function of the MICTUNING MIC-LSB1 rocker switch?
The MICTUNING MIC-LSB1 rocker switch is an ON/OFF switch for LED lights.
• What color is the MICTUNING MIC-LSB1 rocker switch?
The MICTUNING MIC-LSB1 rocker switch is blue.
Why We Like This
• 5 Pin on off Rocker Switch• SPST designed(Single pole single throw)• Set of jumper wires included• Two premium LEDs emits cozy beam• Sturdy durability
Additional Product Information
| Color | Blue |
| Height | 1.6 Inches |
| Length | 2 Inches |
| Weight | 0.02 Pounds |
DaierTek LED Light Bar Switch Panel, 3 Gang Rocker Switch Panel, 12V Toggle Switch Panel for Truck Car RZR Jeep RV Automotive Marine Boat Blue 12 Volt Switch Panel Waterproof
Different from other switch panels on the market, the DaierTek LED Light Bar Switch Panel uses unique technology to make the three switch buttons into a bright lacquer effect. This makes the buttons coated with varnish look more shiny and noble. Theswitch panel is also made of black aluminum plate, which is sturdy and has a longer service life.
The dimensions of this 12V toggle switch panel are (Length X Width): 393” X 264” for the black aluminum plate size and 287” X 138” for the cutout size. It is suitable for use in a variety of vehicles such as cars, trucks, RVs, jeeps, and boats.
This LED light bar switch panel comes with 12V LED rocker switches that are SPST 5PIN ON/OFF with 12 Volt DC Dual Blue LED Light. The symbols on each button are laser-etched, making it easy to find the right switch in the dark.
The 20 Amp heavy-duty car light switches on this panel are widely applied to control LED light bars, rear lights, rock lights, offroad lights, headlights, taillights, fog lights, auxiliary lamps, and more.
Package includes:
1 x Pre-wired 12
Common Questions on DaierTek LED Light Bar Switch Panel, 3 Gang Rocker Switch Panel, 12V Toggle Switch Panel for Truck Car RZR Jeep RV Automotive Marine Boat Blue 12 Volt Switch Panel Waterproof
• What is the DaierTek LED Light Bar Switch Panel?The DaierTek LED Light Bar Switch Panel is a 3 gang rocker switch panel that is 12V toggle switch panel for truck car RZR Jeep RV Automotive Marine Boat Blue 12 Volt Switch Panel Waterproof.
• How does the DaierTek LED Light Bar Switch Panel work?
The DaierTek LED Light Bar Switch Panel works by allowing you to control the LED light bar with a toggle switch.
• What are the benefits of using the DaierTek LED Light Bar Switch Panel?
The benefits of using the DaierTek LED Light Bar Switch Panel include being able to control the LED light bar with a toggle switch, being able to mount the panel in a convenient location, and having a waterproof design.
• How do you install the DaierTek LED Light Bar Switch Panel?
You can install the DaierTek LED Light Bar Switch Panel by following the included instructions.
• How do you use the DaierTek LED Light Bar Switch Panel?
You can use the DaierTek LED Light Bar Switch
Why We Like This
• 1. UNIQUE TECHNOLOGY: Different from other Matte 3 Gang Rocker Switch Panels, we take unique technology to make the 3 switch buttons into a bright lacquer effect Buttons coated with varnish look more shiny and noble.• 2. DIMENSIONS: The Led Light Bar Switch Panel Dimensions(Length X Width): 393” X 264” Black Aluminum Plate Size and 287” X 138” Cutout Size• 3. WATERPROOF SWITCH PANEL: It’s a waterproof switch panel.• 4. FEATURES: 12V LED Rocker Switches used in this Panel, They are SPST 5PIN ON/OFF with 12 Volt DC Dual Blue LED Light Cool Symbols Laser Etched on Each Button, Easy for you to find the right switch in the dark.• 5. APPLICATION: 20 Amp Heavy Duty Car Light switches are widely applied to control LED Light Bar, Rear Lights, Rock Lights, offroad Lights, Headlights, Taillights, Fog Lights, Auxiliary Lamps and etc This 12V Toggle Switch Panel for Truck, Car, RZR, Jeep, RV, Automotive, ATV, SUV, UTV, Bus, Tailer, Marine, Boat
Additional Product Information
| Color | Blue |
| Height | 2 Inches |
| Length | 3.8 Inches |
LED Light Bar Waterproof Rocker Switch Toggle – ON/Off Blue LED Light – 12V 20Amp 24V 10Amp, 5 Pin for Automotive Cars Vehicles Marine Boats Trucks Trailers 4×4 Caravans RVs SUV ATV UTV & More
A LED light bar waterproof rocker switch toggle is a great way to add some style and function to your vehicle. It’s easy to install and comes in a variety of colors and finishes to match your personal taste. LED light bars are a great way to improve visibility while driving, and they’re also a great way to add some style to your vehicle.
Common Questions on LED Light Bar Waterproof Rocker Switch Toggle – ON/Off Blue LED Light – 12V 20Amp 24V 10Amp, 5 Pin for Automotive Cars Vehicles Marine Boats Trucks Trailers 4×4 Caravans RVs SUV ATV UTV & More
• What is the maximum current that this switch can support?This switch can support a maximum current of 20A.
• What is the maximum voltage that this switch can support?
This switch can support a maximum voltage of 12V.
• What is the minimum voltage that this switch can support?
This switch can support a minimum voltage of 5V.
• What is the switch made of?
The switch is made of ABS plastic.
• What is the lifetime of the switch?
The switch has a lifespan of more than 50,000 hours.
Why We Like This
1. LED light bar is waterproof and toggle switch is ON/Off.
2. Blue LED light is 12V 20Amp 24V 10Amp.
3. 5 Pin for automotive cars, vehicles, marine boats, trucks, trailers, 4×4, caravans, RVs, SUV, ATV, and UTV.
4. More than just a LED light bar, it is also a rocker switch.
5. Perfect for any car, truck, SUV, ATV, UTV, or boat.
Benefits of Light Bar Toggle Switch
If you are looking for a light bar toggle switch, there are many benefits that you can enjoy. This type of switch provides many advantages over traditional switches. For starters, they offer more flexibility when it comes to controlling the lighting in your car or truck. With a light bar toggle switch, you can have full control over the brightness of your lights without having to take your hands off the steering wheel.
In addition, these types of switches tend to be more durable than traditional ones. They also offer a smoother operation, which is ideal if you frequently use your light bar in difficult conditions.
Buying Guide for Best Light Bar Toggle Switch
A light bar toggle switch is a great way to add style and function to your car. Here are a few things to keep in mind when shopping for a toggle switch:
-Style: You’ll find toggle switches in a variety of colors and styles. Choose one that matches the look of your car’s interior.
-Function: Make sure the toggle switch you select is compatible with the light bar you have or plan to purchase. Some switches are meant for specific types of light bars.
-Installation: Some toggle switches come with wiring harnesses for easy installation, while others will require some splicing. If you’re not comfortable doing electrical work, opt for an easier-to-install option.
Frequently Asked Question
What is the best LED light bar toggle switch?
Some factors that you may want to consider when choosing a toggle switch for your LED light bar include the size of the switch, the number of poles, the amperage rating, the voltage rating, the material, the finish, and the price.
What are the benefits of using a LED light bar toggle switch?
A LED light bar toggle switch can be used to control the LED light bar. The benefits of using a LED light bar toggle switch include: 1. LED light bar toggle switches can be used to turn the LED light bar on and off.2. LED light bar toggle switches can be used to dim the LED light bar.3. LED light bar toggle switches can be used to change the color of the LED light bar.
How do LED light bar toggle switches work?
LED light bar toggle switches work by allowing the user to control the flow of electricity to the LED light bar. By flipping the switch, the user can control whether the LED light bar is turned on or off.
What are some of the best LED light bar brands?
There are many great LED light bar brands on the market, but some of the best include Baja Designs, Rigid Industries, and Vision X. These brands offer high-quality products that are built to last and provide great illumination.
How can I install a LED light bar toggle switch?
There are many ways to install a LED light bar toggle switch, but the most common way is to wire it into the vehicle’s 12-volt electrical system.
Conclusion
We offer the best light bar toggle switch on the market. We have a three year warranty and a money back satisfaction guarantee. We offer free shipping on all orders over $100. Our light bar toggle switch is made of high quality materials and is built to last.